-
App Tile Swipe functionality
I would like to suggest adding tile swipe functionality. This would be to enable a swipe to the next device/thermostat after selection from the main dashboard. The app currently requires you to exit and select to enter the settings for another device. Retaining current functionality whilst adding the swipe to the next…
-
Temperature measuring device
For rooms where you have multiple devices such as two radiators with TRV’s or also a controller it would be great if you could select more than one device or allow Tado to use the average temperature across multiple devices in that room. In my living room, I have two radiators. Selecting one as the primary measuring device…
-
Tado app to show total amount of heating hours used for a month
This seems like a no brainer to add to the app. The info is already there if you look at the day-by-graph but it's hard work to add this up manually.
-
Notification when manual mode
I think a notification when somebody in the family select it woulf really help. Aldo considering thag Alexa and Google somtimes misunderstand pur command and change temperature without our pur will.
-
When an open window is detected add the name of the room to the notification
Could the name of the room be added to the notification text when an open window is detected?
-
Extend on/off period - temporary schedule change
I often want to make a temporary change to the schedule. It would be useful to make an adjustment just for the current state. If you could edit the time of the "next change" displayed on the room or hot water screen then this would be easy. The usual stored schedule would resume later.
-
remove the need for the Internet bridge or at least use the house wifi
I think it's unbelievable that devices have to use a bespoke wifi bridge and even limit the household to a single bridge. I have just installed the system into a Yorkshire farm house with thick stone walls. no way does the thermostat, CH controller and bridge connect. If the system used the house wifi (where I have a mesh…
-
Nursery Temp
We’re expecting our first child and have been going to NCT classes recently. We looked at sleeping conditions and talked about room temperatures. I thought it would be a good idea to be able to set temp warning with alerts for when a nursery/babies room went about a certain temp. Not that it should with Tado fitted but as…
-
Not a new idea. Just common sense
I join the clamour for the bridges to act as repeaters. I have a large 18th century house with a barn wing and two heating circuits from one, large boiler. It took me ages to get tech support to explain how to control which room linked to which heating circuit, but I did have to buy to starter packs - so I have two bridges…
-
Open window detection
So we have child lock on, on our tado radiators, since we have a one year old who loves to turn the knob like a roulette table. What I've noticed is that shortly after she's been playing with it, we invariably get an open window warning. My take is that she warms up the knob and it then cools down and the tado simply looks…
-
Outside temperature visible on room screens
As it says above.
-
Predefined Heating Schedules
Maybe like a gallery of predefined schedules by tado with the opportunity to download schedules from other users of the community. For example: Winter, „Summer“, HomeOffice days etc.
-
Service Mode for Boiler Maintenance, Draining and Power Flushing
Hello, It would be important to have a Service Mode setting, where: all radiator thermostat valves are fully open and in manual mode: can be individually set to fully open or fully closed boiler control is set to off and in fully manual mode: on or off any timers and automatic "return to schedule" are disabled This is…
-
Fix HomeKit support (round up of feature requests)
Hey tado, everyone seems to know better than you what your HomeKit support needs. Here I gather all the requests I have seen around: Allow temp/humidity sensors to be exposed independently. We bought these pricey TRVs. Why don't you let us use all their features? Expose battery levels in HomeKit. It is really stupid that…
-
Bypass feature
Hi all, I am a happy tado user since a few months and realized that we needed to install a by-pass in our cv system. Now I am wondering why tado does not offer the feature to mark one of your smart thermostats as the by-pass radiator. So this thermostat will never close fully, so that the pump of the CV (boiler) is…
-
Show current humidity in the main app screen
It would save a lot of clicks if we could see the current humidity in the main screen, close to the current room temperature. There is a lot of free space for this in each room square.
-
Colour change
Please can you change the colour of the button for care & protect from red to any other colour.. There is nothing more wallet clenching when looking on the app to see what is off & see the red of the care & protect button & start thinking.. Dam who turned the hot water on ;-) Thanks
-
Manual thermostat adjustment temperature limit
We run a B&B and every room is equipped with a smart thermostat so the guests can control the temperature in their room (normally the Smart Schedule controls the temperature). To my surprise numerous guests turn the temperature to the maximum of 25°C (I guess they just turn the control knob all the way without thinking)…
-
Increase number of heating devices per home
Hello, 25 heating devices are not enough for larger homes, such as mine. My home has 18 radiators controlled by three different thermostats. This means that if I want to use Tado radiator valves with Tado Wireless temperature sensors, 25 heating devices per home is not enough. Please increase the limit to 30 or 35 heating…
-
Smart Things integration
Are we any closer to a SmartThings integration?
-
show SSS heating indicator on the room tile
on the main page of the application, where you see all the room. I would like to see the three little SSS indicating which room is currently heating, that would help me tweak the parameters of the schedule without having to click on each room at each time to see which one triggered the start of the heating system.
-
Activity logs
Hi, Right now it's very difficult to know if Geofencing is working or not. It would be useful to have a log that remembers a few events like: switched to away mode, switched to home mode, temperature lowered in room x, etc. This way we would know if Geofencing works correctly... My app closes all the time and since there…
-
Passage d'une pièce à l'autre
Bonjour, Je trouve contraignant de fermer la fenêtre de réglage d'une pièce pour aller dans une autres pièces. Il serais bien de slider pour aller d'une pièces à l'autre. Sinon l'appli est top et le matériel aussi.
-
Usability—show visual indicator when heater is active
Unfortunately tado doesn’t give you any feedback when it’s turned the heater on or off, in my case it’s hooked up to ducted gas heating so it would be ideal to have an icon displayed whenever the heating is active (possibly subject to schedules and optional user preferences)
-
More colours available
Everything in my bathroom is black, all switches and power outlets. Only thing white is the Tado Thermostat. When will Tado products be available in more colours?
-
Problem with the wife!
Being of a generation who were not brought up with smartphone technology my wife refuses to use a smartphone and therefore the Tado app. She often uses the room thermostat to increase the room temperature in the evening and I then wake up in the night 'on boil' because the system does not revert back to it's preset…
-
Temperature monitor of hot water cylinder
The hot water control does not really control the water in my cylinder, it is just an on/off switch. It will be excellent if Tado could come up with a compatible thermometer that would monitor the water temperature in the app. Even after spending close to £1,000 I am sometimes getting cold showers as due to some…
-
Meerdere bridges in een netwerk en PoE ondersteuning
Wij leven in een huis met L-vorm, en ervaren dat het onmogelijk is met één bridge de totale oppervlakte te bestrijken. Meerdere bridges od extenders zouden dus heel welkom zijn. Mochten deze bridges dan nog PoE gevoed kunnen worden, hebben we nog enkel de netwerkkabel nodig om deze te verbinden (misschien kan de antenne…
-
Polish menu
Hello, can you add Polish to the application, I would be very grateful and other Poles too
-
rename Tado smart buttons
Currently it is not possible to rename the Tado smart buttons. When the batteries of one of the buttons in running low, it's quite a quest to find out which Tado button needs to be recharged, since I have multiple buttons per room. Could it be an idea to give the possibility to rename every button in order to increase the…