-
VoiceOver
Goedendag. even het volgende, ik ben namelijk een blind persoon en gebruik VoiceOver op de iPhone. Nu heb ik ontdekt dat de app op de iPhone is veranderd maar in de VoiceOvermodes werktdit niet geheel goed in samenwerking met mijn Mitsubishi heavy industries airco. Wat wil het geval zodra ik de modus wil instellen is er…
-
Single App or Bridge linking V3 and Tado X.
I propose a single App and / or a bridge product to links V3 and X products. This would enable those on V3 to extend their systems to reach distant radiators. Reason: Many people have invested in Tado products for their home on V3. These people identified the problem that Tado V3 had limited range and some radiators could…
-
"Summer/Cooling mode" for wall thermostat
Hi there, I have an underfloor heating with a cooling function. In summer, cool water can run through the floor to cool the room. For that I currently need to set the temperature to max (25°C) to keep the thermostats open. If the room temperature would rise above 25°C the thermostats would close and prohibit a cooling…
-
Multi Home Support
I would like to use tado in my main house and in my vacation home. Currently this is only possible by using one account through the app and the other account using the web-app. I would like to have both available in the same account.
-
Display Tado x on when change
The new tado x does not turn on the display when changing the temperature from the app, which the previous version V3+ did. It is not great that an updated version of the device has fewer features than the new one
-
Slimme Aircobediening V3+ mogelijk maken in de X lijn app of een X lijn slimme aircobediening
Nu heb ik 2 icoontjes van tado op mijn mobiel. 1 voor de verwarming (lijn X van tado). 1 voor de airco's (V3+). Ze kunnen niet samen in 1 app en dat is heel irritant. Dus of mogelijk maken dat de slimme airco V3+ bij de tado X app in kan. of een nieuwe slimme aircobediening in de lijn X maken.
-
IR AC control
As a great fan of your radiator thermostats (Tado X, I installed 6), I would propose you venture into the following: create a Matter over Thread, battery powered, IR control for AirConditioning and/or, alternatively Insert IR capabilities in the current thermostat (or create a model with this feature) that allow me to…
-
Heating profiles
Please add a function for multiple profiles for heating schedules based on 1 week of heating schedules being different to another week of heating schedules based on work patterns etc . I know there is the geo fencing function but that relies on people having that opinion turned on. In my experience younger members of the…
-
Y plan denergise 3 port valve after CH
The Y plan system maintains power to the 3 port valve after CH has been on (but water off/not called for), whilst 3 port valves can cope with this they do use a small amount of energy and some hum rather annoyingly. Idea: When the Tado turns off the CH it could momentarily call for the HW only to denergise the valve…
-
Tado Internet Bridge won't connect to EE Router
Hi All. I've just changed my internet provider to EE. I was struggling to connect the Tado Internet Bridge to the EE Router i.e. No power, No LED's lite on the bridge. I read other people's suggestions & ordered a TP-Link LS1005G 5 port switch from EE £11. It took a couple of days to arrive. I quickly connected it to the…
-
Improve "Climate Report" graph
The horizontal grid lines in the "Climate Control" history graph currently behave very inconsistently and are not very clear to work out the temperature from. There are three fixed lines, the top and bottom have a label which varies depending on the range of the currently displayed graph, but by having fixed lines, this…
-
Slider sensitivity
Am I the only one having difficulties setting a precise temperature with the slider in a room screen? In particular when releasing my finger from the screen most of the time the temperature cursor will further move by half a degree! Bref, i'd enjoy a more precise slider ;-)
-
Apple Watch App
I don't believe a fully functioning app for Apple Watch is required but probably the key reason stopping me from getting one is being able to set the Home/Away via the watch rather than my phone. I'd really like to sometimes leave my iPhone at home! Perhaps you could create a simple app which can set the Home/Away in Tado?…
-
Please add step up/down keys to app slider
I’m just coming to terms with my new Tado x basic “thermostat” system. I’ve noticed the slider for setting in the app for temperature target is dreadful. As soon as you touch it it glitches away from the present setting. It is very awkward and fiddly to use accurately. I often like to make small increments/decrements to my…
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
Preventing radiator valves from getting stuck
I have replaced my heating control system with Tado smart vales on all radiators. On my previous system there was a feature that opened and closed all TRVs at a fixed time once a week irrespective of any heating schedule in operation. This operation did not take more than a minute or two. This meant that valves not used…
-
SUMMER MAINTENANCE CYCLE
Tado needs the following. A way of cycling all the valves at least once a week during summer, and running the central heating for a couple of minutes to prevent valves seizing, to prevent pumps calcifying in hard water areas, and to prevent dead spots where sludge settles and to cycle inhibitor. All that is needed is a 10…
-
Summer mode
My son has a Netatmo system and during the summer, the connected valves calibrate every 2 weeks, even when the thermostat is off, so that the thermostatic heads do not get calcified or stuck (which may happen if the valve is fully closed for a couple months). With Tado, I need to take all my programming to put the valves…
-
Advance Programme Setting
Hi I have my heating system set up to come on at a specific time. Sometimes I get home early and want to turn the schedule on rather than wait for the schedule to kick in. At present if you boost the system ALL the radiators come on. Turning them on individually is a pain I have contacted Tado and there is no way around…
-
App “Advance” button
I have a suggestion for the tado app. On my old boiler time controller I had an "Advance" button that advanced the settings to the next time period and then reverted back to the normal schedule once the next time period finished. On the tado app to bring on the heating earlier than scheduled, I think I have to go into…
-
Heating advance
Hi, This is an old idea that hasn't occurred to Tado as yet. My old school heating controllers have always included a Heating Advance Button. It's a simple idea - if you have a day that starts a bit earlier than usual, you just advance the whole heating programme with a single click, or turn of a knob. The next programmed…
-
HomeKit automation: resume schedule
I am having trouble understanding why the feature to resume schedule can not be triggered by a HomeKit automation. Surely this should be a fundamental feature?
-
Multiple Homes
I have a Tado installed at work and home. I shouldn't have to log out and back in each time for the geolocation etc to work. Please allow multiple homes. Other smart home apps allow this. I'm surprised you don't have this feature.
-
Enable multiple smart schedules
During the week, we have various ways we want to smart schedule our radiators: If we're both in the office, then we don't want the heating on If I'm in the office, then we want the heating on but not in my partner's office If my partner's in the office, then we want the heating on but not in my office If we're both working…
-
Tado Wifi enabled Hot Water Cylinder Temperature Thermostat Display & Controller
As far as I can understand, if you do not have a smart (oil or gas) boiler or a boiler that can separately control and heat only your hot water you are limited to the control and heating of your hot water cylinder by timer schedules only. However a timer schedule cannot detect if you already have enough supply or hot…
-
Add humidity in the tiles
The current tiles have enough room to add more information like humidity. Additionally you could a a toggle in the settings to toggle on/off certain displays.
-
Showing Name on Tado X TRV
Hi, I'd like to suggest that a TRV displays its name. I'm slowly testing moving from Evohome to Tado X. I've replaced some TRVs but have range problems, so I switched a couple of the Tado X TRVs around to confirm it really is a range problem. I put the wrong one back on a radiator so the Tado app shows a connection error.…
-
“Saved Schedules” Idea
Hello, I have seen some posts about shift workers. To echo these. The way of editing schedules is very fiddly and time consuming, especially when you have a different shift pattern each week. It would be more beneficial to have “saved bank” of specific days and specific weeks you work, and you can quickly copy them into…
-
Preservation Summer mode
Hi. I have multiple tado X heads on my radiators, with a opentherm module in my boiler, with a wireless X receiver, and considering that summer is near, would be nice have a dedicated mode for that season. To prevent problems with radiators heads, would be great implement a function that's completely opens all the valve in…
-
Matter for V3+
We need matter for V3+ which can be possible via matter over wifi.