-
Temperature monitor of hot water cylinder
The hot water control does not really control the water in my cylinder, it is just an on/off switch. It will be excellent if Tado could come up with a compatible thermometer that would monitor the water temperature in the app. Even after spending close to £1,000 I am sometimes getting cold showers as due to some…
-
Meerdere bridges in een netwerk en PoE ondersteuning
Wij leven in een huis met L-vorm, en ervaren dat het onmogelijk is met één bridge de totale oppervlakte te bestrijken. Meerdere bridges od extenders zouden dus heel welkom zijn. Mochten deze bridges dan nog PoE gevoed kunnen worden, hebben we nog enkel de netwerkkabel nodig om deze te verbinden (misschien kan de antenne…
-
Polish menu
Hello, can you add Polish to the application, I would be very grateful and other Poles too
-
rename Tado smart buttons
Currently it is not possible to rename the Tado smart buttons. When the batteries of one of the buttons in running low, it's quite a quest to find out which Tado button needs to be recharged, since I have multiple buttons per room. Could it be an idea to give the possibility to rename every button in order to increase the…
-
Room specific 1h boost button
Boost button in the room tiles in the overview screen. Useful when you prepare the kids for bath or bed. I have 7 rooms/zones spread over 2 floors and I don't want to boost all the rooms.
-
Better battery performance
Rather than having good and low, introduce a medium level too. Brand new batteries show as good. Thresholds should be 75%+ Very Good Dark Green 45%+ Good Green 20%+ Low Orange 7% Very Low Red
-
Geofencing lors d'une consigne de température via l'application
Bonjour à tous, Je rencontre un souci avec le geofencing lors de l'auto-assist qui est aussi valable pour le mode absent. Lorsque j'indique une consigne de température supérieure via l'application a celle prévue dans la programmation intelligente ( que ce soit en durée, ou jusqu'à la réactivation de la programmation ou…
-
Monitoring of Connectivity
Useful if the app could monitor connectivity of the Tado Internet Bridge to both he internet and Tado Cloud and notify the user if there is an issue
-
som om versus 24 hour
why not chance the app, so people have the choice to set time schedule between am pm and 24 hours schedule, IT would make i easyer for som people.
-
Add Time Block
Currently this is quite crude. The app adds a time block from 10:00 to 12 :00. But usually the user needs to insert a split a current time block which could be anytime if the day. I suggest to move the "Add Time Block" into the Edit Time Block. This is where the Delete Time Block currently lives so this is neater. More…
-
Open window detection only when heating and without Auto-Assist
First: The automatic suspension is a really efficient tool, but I absolutely don't see any reason why we should pay for it? As I don't have auto-assist I receive a push notification whenever an open window is detected. The effort for tado of disabling the heating in the room for 15 minutes is lower than the effort of…
-
Air comfort notification
Can the app please push a notification if one of the rooms is going from high to low air comfort with a recommendation of what to do -> Open window, set higher temperature. Can the air comfort be shown in the main tiles (for instance small point) of the app?
-
Air Source Heat Pump
Hi, I currently have a tado controlling my hot water and central heating. I would like to update my central heating to use a ashp, are tado controllers compatible with this type heating system
-
Req. App intigration Homey
Hi Do you plan to make a integration with homey bridge? thanks for a great product \Søren
-
Swipe from left to close room thermostat pop-up for Tado app on iPhone
When clicking on any of the rooms to change the temperature, I have to somewhat awkwardly (or use my other hand) press the little cross in the top left corner. It would be a lot easier if I could either swipe from the left to go back, or swipe down to close (as it comes in from the bottom). Other than that I think the app…
-
Verhoog de maximale instelbare ruimtetemperatuur
Graag de maximale instelbare ruimtetemperatuur verhogen.. dan wordt het installeren in de zomer eenvoudiger.. anders moet je de thermostaten in de koelkast leggen om het systeem te testen.. Als je deze maximaal 35 graden kan zetten dan heb je geen probleem met instellen..
-
Batterijen Tado leeg.. deze batterijen zijn de beste vervangers..
Als de batterijen leeg zijn, vervang ze dan door oplaadbare batterijen 1,5 volt lithium.. Wel zo duurzaam en gaan een leven lang mee... stop de verspilling.. https://amzn.to/396MPaC
-
Boost Heating for selected rooms
The Boost Heating is a very cool feature. Wish it was there for selected rooms. I may wish to heat the living room at just the click of one button.
-
Re Server failure issues
Hello I was asked to give a description of a concern I have, regarding your recent server outage and the lack of a fit for purpose local control option in the event of a server outage or loss of internet connection. I have ask my son Jon to write this, as he is a Chartered Engineer and more familiar with the technical…
-
an option operating mode working like a signal generator just like the physical remote control
when I ask Siri to turn on the air conditioner, tado sends out turn-on signal. when I ask Siri to turn off the air conditioner, tado sends out turn-off signal. lower, raise the temperature by one degree, two degrees ... set the air conditioner temp to xx degrees ... no matter what state tado is in. This mode replaces a…
-
origin of an order
Virtual assistants are increasingly present in homes. And Tado, interact with them very easily. It would be a very valuable information if, in the activity graph, in addition to other information (temperature, humidity, climate ...) the origin of a machine start-up order could be reflected. And so, to know if it has been…
-
Native support for Gree Air Conditioner
As all Gree Air Conditioner Units come with Wi-Fi it would be great to have a native support in the Tado Hub without the need of an extra Smart AC Control. In my case I have all Smart Radiator Thermostat on each radiator and Wireless Temperature Sensor in each room. I like that both of those require no connection to the…
-
Away Mode (Pet friendly)
The away mode is great, but I a have a cat and maybe it could be great to have an away mode “pet friendly”. Making sure that the house is neither extremly cold or hot so my pet is confy in it.
-
SUMMER MAINTENANCE CYCLE
Tado needs the following. A way of cycling all the valves at least once a week during summer, and running the central heating for a couple of minutes to prevent valves seizing, to prevent pumps calcifying in hard water areas, and to prevent dead spots where sludge settles and to cycle inhibitor. All that is needed is a 10…
-
Ability to limit/control how much a TRV opens a radiator - control speed/aggressiveness of heating
I've 2 TRV's in a couple of rooms, and in both cases I find that it'd be beneficial to limit the amount that one of the radiators contribute to the heating. eg. in case of a study, I don't want the radiator right beside me blasting out full heat, roasting me before the whole room heats up. I could remove the TRV from that…
-
Gentle heating curve
Find it more pleasant when tado° heats my room slowly (as it does if the set-point is just 1° above the current temp on a smart TRV). Would be great to have a way to choose to have it heat up gently in this way (i.e. presumably with a lower flow rate) all the time.
-
Integration with Verisure
I’ve recently discovered that Verisure devices (alarm) placed in different areas of the house also record temperature and would love it if it would be possible for tado to use this information as well.
-
Improve readability of serial numbers in the iOS app
The serial numbers in the iOS app are displayed in fairly small, grey text. They are only really readable for people with perfect eyesight — even with my reading glasses on, I struggled. Could the font size be increased, and the colour changed to something much darker to provide better contrast — if not on the device list…
-
Option for Valve fully Open as max temp is only 25°c
As you can only set temperature to a maximum 25°c, after that can we have a fully open valve option. Yes sometimes some of us want hotter than 25°c
-
Radiator Maintenance Setting
I have Tado on my boiler and all of my radiators. My central heating system (combi boiler) is maintained every year by an engineer. The engineer needs to be able to turn on the boiler and for all the radiator valves to be open. There needs to be a maintenance mode in the app which simply turns on the boiler and opens all…