-
Plasma Quad Mitsubishi
Hola, tengo un aire acondicionado Mitsubishi MSZ-AY42VGKP y este lleva incluido Plasma Quad que es como un purificador de aire. Este se pueda activar/desactivar desde el mando a distancia original pero al sincronizar Tado y gestionar el aire acondicionado con vuestro producto no me deja activar el Plasma Quad desde Tado y…
-
Multiple Wireless Underfloor Thermostats
Having moved from a single heating zone house with Tado to a new house with multiple heating zones (1 radiators + 4 underfloor) controlled by a Lightwave system. I would dearly love to convert the new house to Tado which is far superior. The only problem is that apparently Tado do not currently support multiple wireless…
-
Heating profiles
Please add a function for multiple profiles for heating schedules based on 1 week of heating schedules being different to another week of heating schedules based on work patterns etc . I know there is the geo fencing function but that relies on people having that opinion turned on. In my experience younger members of the…
-
Toshiba/ others Pure addition in V3+
Many AC's have nowadays this PURE functionally which uses plasma to burn small particles in the air. Would it be possible to enable this funtion in TADO V3+. It's very irritating since I cannot use this at all. If I enable it in my remote then every time I swicth any setting s from TADO this PURE function gets off. I know…
-
Add current Boiler Flow rate to graphs if using Digital Link
As Tado˚ knows the flow rate temperature of boiler at any given time, can this information be added to the graphs, as you hold your finger on the graph, see example below This would help us to determine if we can adjust the MAX Flow rate to be more efficient or if the Flow Rate is not high enough and the boiler is…
-
Hot Water Catch Up
Hi One issue is that when the geofencing controls the hot water, and you are out for the day and your scheduled timings are not done, you come home to no hot water :( It would be great if there can be a setting for a 'Hot Water Catch Up' that would identify if a hot water schedule has been missed, and Geofencing identifies…
-
Heat release valves
If there would be an option on valves to setup not to close the circuit when reaching the heating point, just send the end signal to the themrostat, then there should be circuits where the remaining heat should release and this extra heat could be useful in bathrooms or other higher heet needed rooms.
-
Support for multiple tado installations linked to 1 account
Please can we have proper support to enable management and control of multiple tado installations via the one account/email I stay at several locations and manage others as a landlord. When email notifications arrive they do not indicated which home they are for. Logging in/out of multiple accounts is awkward when you want…
-
iOS 16.3 HomePod Temperature Sensor
With iOS 16.3 HomePods can now relay temperature and humidity data to HomeKit. I’ve had trouble with the room heat being cold on one side, and the tado valve is near radiator… I’m using the HomePod for offsetting the room temperature, could this be automatic ?
-
App should be able to shutoff manual settings of starterkit
For the use of Tado (starterkit) in rooms which cannot be accessed by you in person, such as; guestrooms, B&B, kids bedroom, other privacy sensitive situations, etc., it would be welcomed if the app can shut off the ability to change the roomtemperature manuallly. EG. We have a B&B and we have programmed the temperature…
-
Improve the temperature differential by applying a feedback loop
Every house is different. Boilers and plumbing is different. This leads to the temperature rising gradient being specific to each installation. So far so good? Now we often find a situation where a tado rad stat or room stat is set for, say, 18 degrees cent, but one later finds that the actual temperature is higher. It…
-
Target temperature in graphs
Hi Really like the graphs of the heating profile throughout the day for each ‘zone’. However it would be great to see the target temperature (in a red line) on those profiles.
-
Color of tiles
The color of the tiles is now fixed at blue/green till 18 deg and orange/red from 19 degrees. We never set the temperature above 18,5 and therefore the colors are always blue/green. It would be nice to be able to set other limits. Having different limit for bedroom and living room would also be nice.
-
Hide Tiles
On the homescreen there are tiles that I never use and would like to hide. It would be nice to be able to hide the following tiles: auto-assist, air comfort, energy IQ, Care & Protect.
-
Tado to start replying back
My idea is for Tado to start replying back to the community. I am seeing posts from YEARS ago ignored. It's time for this idea to be the top one in the company and Tado to listen to it's loyal customer base.
-
Warn about two day instruction wait time with compatibility check
I've just had to change my boiler, and I followed all the Tado advice about asking for a compatibility check. I thought all was good. The boiler installer engineer was here getting towards completion. I went to the Tado app to change the boiler. Found the boiler… and it said something like "Please wait for up to 2 days for…
-
Valve moving when out of heating season
It's usual that the long pressed valve needles are stuck. If the valves move them on a setupable time period (daily, weekly, etc) this should be avoidable.
-
Better collaboration with Air Source heating system
I have an air source heating system in my home and the projected forecast costs are not reflected well at all with the app. I input my energy usage each month and never get anywhere close accurate costing suggestions. The data input screens are clearly for gas/oil systems, and not designed for Air Source systems. Our Tado°…
-
Manually switching off individual rooms
Sometimes it is easy to switch off one room, for example the one that is still cold in the morning but is heated by the sun while nobody is there. The only way to do this is to turn the temperature down, or first switch off all the rooms and then switch some of them back on.
-
Set a Minimum Central Heating Flow Temperature (OpenTherm)
Hi, The main purpose of this post is to try and gain an understanding of whether setting a minimum central heating flow temperature is a feature that other users of this forum would value and like to be developed by Tado as part of their algorithms. Are there any other users out there that have abandoned using the…
-
Temporary extend current schedule
Time to time I get into the situation when I know I will work a bit longer in my work room. Currently I can do two things to extend the heating, 1) wait until the switch and then set to the same temperature as before with a (optional) time limit 2) set the temperature +/-0.5C before the schedule switching off with…
-
Self installation
We have chosen to have our Tado wireless thermostat installed professionally. The pro told us Tado as a product is fab but he says it should not be classed as self installation because once you take off the boiler cover you have broken safety regulations and would need it to be assessed by a professional afterwards.
-
Improve Care&Protect boiler fault detection
The problem i encounter is easy to explain. If for example my TADO is programmed to turn my boiler on (be it automatically or manually), and for whatever reason the boiler is either Off or the mains is down, TADO doesn’t inform that the boiler isn’t on. In this second report I have sent, the boiler was resetting itself due…
-
Change comfort scale
I find 18C comfortable, yet Tado tells me that I’m cold (even 19.5C is considered cold, whereas it’s uncomfortably warm for me). I’d like to be able to change the comfort scale, so I’m not prompted to “put on a jumper”, “snuggle under a blanket”, or “turn the heating up”. When we’re meant to be saving energy and resources,…
-
Fault detection if no temperature change detected
If a room has an temperature increase demand but there is no change in temperature for a given time period a warning should be triggered by Tado. My boiler has an issue that it needs resetting Every soften I only find out after an hour so after i get cold. That the system is not working. But the Tado ‘care & protect’ tab…
-
Reset of meter counter
Hi, I have recently got replacement of meter device from gas company, and it has counter "reset" to some value that is smaller than last value I have entered in application. Current support recommendation is to delete all past records, and to start over from time when this meter was installed - with loosing all history…
-
Volledig open, volledig gesloten instelling
Beste Tado, Het zou zeer handig zijn om een kleine instelling toe te voegen aan de instellingen voor de slimme radiatorknoppen. Namelijk een instelling dat hij volledig open gaat als er warmte vraag is, en volledig gesloten gaat als er geen warmte vraag meer is. Dus een instelling toevoegen voor niet stapsgewijs inregelen,…
-
Themed icon for Android app
Since Android 12 or 13 apps can provide a themed icon that blends in nicely with the new visuals by adapting to the current accent color. Could you please implement it for tado as well?
-
Heating Activity - Real Time
Hello, Whilst "Heating Activity" is good at showing which zone/room is currently heating, what is not in anywhere near real time is the Total Today value. It will sometimes take hours before the Total Today time changes when I know the heating has been on for more than the total of 11 minutes it has kept telling me.. I may…
-
Smaller increments for radiator thermostats
Hi, I run a couple of thermostats on my district heating system. The water temperature to the radiators is controlled by a PI-regulator, that does a good job. However, the Tado thermostats seems in daily operation to make quite dramatic changes to the waterflow through them, which means I see dramatic water temperarure…