-
Meter readings
Around 18 months ago we had our electricity meter changed to a smart meter. The TADO problems that followed were : 1, it wasn’t possible to enter the meter readings for the new meter so I had to calculate how many kWh we had used that day and add it to the original meter reading. 2. This manipulation worked well until the…
-
Un termostato utilizzabile sia come riscaldamento che come raffrescamento, come accensione per PDC
Buongiorno, sarebbe utile realizzare un termostato che permetta la gestione sia del riscaldamento che del raffrescamento. Sempre con contatti puliti COM e NO. In modo che, in base alla stagione lui permetta di avere range temperatura da 5 a 25 per riscaldamento e da 16 a 30 per raffrescamento. Sarebbe utile semplicemente…
-
Radiator Fans
Hi Could you look at the possibility of add on-product such as a radiator fan kit... fans that clip under the radiator, controlled by the Tado valve, so when valve turns on, the fans help circulate the air around the radiator?... this would make a great add-on to Tado and help make it stand out from the other smart valve…
-
Fix bug where manual timer for heating changes does not work
Expected behaviour: GIVEN a room has a timer set for ‘Manual control on Tado device’ under settings/rooms and devices AND the room is currently running its standard schedule (ie there is not a manual adjustment currently running) WHEN the user makes a manual adjustment to the temperature for that room THEN the manual…
-
New Product - Tado Hot Water Cylinder Thermostat or Sensor needed
Tado already make a good range of Thermostats and Sensors to control the hot water flow to domestic radiators. However, in (the fair few) countries that rightly or wrongly use a hot water cylinder to store pre-heated water for use with domestic taps, Tado has no product available to support this. This means there is a…
-
Software development roadmap
The "Suggestions, Ideas, and Improvements" forum has been here for years, brimming with diverse topics and innovative suggestions from our users. However, one question lingers: What if tado° rekindled its commitment to transparency by sharing at least a simple software development roadmap with users? A follow up to a post…
-
Tado away/home iOS shortcut action
Hello, Tado is somewhat compatible with HomeKit using sensors/thermostats individually, but this is not great to create automations. It would be very useful to have a Tado shortcut action we can use in our scripts to set the current mode to be away or home, so we could create automations based on that. This would be…
-
Tado app to set only the tempature.
Why not create an app where you can set only the tempature. It's not handy that every app user can make changes to all settings. We could defently use it. For oure building.
-
Always on display option
Hi just installed my wired v3+ very easy instal and instantly impressed. One suggestion would be to have the option to keep the temp display always on so you don't have to press everytime to view current temp.
-
Away notifications conditions
Hey Tado product owner, Each time I leave my house in spring and summer, I get a notification if I want to switch to away mode.. which is great at winter! But if all of my tado are anyway turned completely off, it’s just annoying and would cause me to turn off the notifications from the app. How about to recognise when all…
-
Reduce water hammer sound by slowly closing the radiator valve
Sometimes Tado closes the radiator valves very quickly, which makes a loud bang due to water hammer. This can be bad for the equipment and it scares my kids. If the radiator valve would be closed more slowly, this would significantly reduce the amount of sound produced.
-
Spring/Summer and Autumn/Winter settings
Depending on the time of year, I change the temp I want to heat rooms to. So around early April I adjusted things and will do so again in October. It would be useful to have a quicker way to jump between these two settings.
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
Launch a range extender or upgrade to mesh network
Tado ticks many boxes but it's behind the competition in its lack of signal booster / wireless repeater. I'm unsure whether to take the risk and buy the system for my relatively large stone house given the risk of radio dropouts. If I knew I could add a range extender if required, I'd have the confidence to buy. Perhaps an…
-
Set hot water temperature through HomeKit
HomeKit integration was a main driver for me to choose tado. I don't like being dependent on cloud services for things that are practically local to my house, so I have configured HomeAssistant to use it through the HomeKit integration. However, after installing it, I found out that there is an important feature that is…
-
New Device - Tado Immersion Hot Water Heating Controller
Many homes having a hot water storage cylinder would also have the hot water heated by an element in the cylinder either as standard or as a backup option to the gas heating system. I wanted to raise this subject here to help gauge if there is actually an interest within the community of Tado users? Do you have a hot water…
-
Smart boiler pressure gauge
Please create a smart boiler pressure gauge so that we can view boiler water pressure in the Tado app. I would like to get a notification from the Tado app if water pressure drops too low. Many thanks for your consideration.
-
Heating
Todo app is telling me I’m useing more than I am
-
Google Home Integration for On/Off Hot Water
I have a fairly old boiler with no digital temp control. Tado supports simply turning the hot water on or off. Google Home shows a entry for the hot water but does not allow me to change its state. Tado support told me: "You have the Hot Water tile enabled in your tado° app. However it is a relay ON/OFF control and you can…
-
Make On/Off Controls Available on Home Screen
It would be more convenient if each tile included a basic on/off control to save you having to go into a new screen first. You already display a 'power' icon in the top right of each tile - see attach - make this live so that clicking it actually works. See Tapo smart device app for example where this is already supported
-
One-click hot water control with 'turn off water' and 'resume schedule' button
I use the mobile app to control my central heating and hot water system. I don't use geofencing as my wife often leaves her phone at home. I do however frequently use the option to 'Turn OFF all rooms' and then 'Resume schedule' later. I would really love a similar option to 'Turn OFF hot water' and then resume the hot…
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
Introducing myself
As suggested by @samd, I am making a short post to introduce myself as the community forum’s new admin. Hello! My name is Emcee, I live in Munich, Germany and am a member of tado°’s Customer Experience team. I hold a M.Sc. from the Technical University of Munich. My thesis was focused on hydroelectricity. I worked in the…
-
Adding Wireless Thermostat change my zone config - not right to me
I have a number of wired thermostats downstairs all working for about 6 months. Then added a wireless controller and thermostat upstairs. But all the downstairs ones had their zone changed to use the wireless controller as the zone controller and I dont remember saying this was OK, i did set up the pair of controller and…
-
Redesign internet bridge and provide longer cables.
Hello. I would to suggest that: 1. The internet bridge is designed so that the cables come from the top not the bottom of the device. This would allow the device to stand upright freely away from the wall (2 requirements for best placement) 2. I would also like longer cables to be provided for the internet bridge - the…
-
Remove the 10 room limit from the controller
Please remove or increase the 10-room limit from the controller. I have to group rooms together to make my system work which is not ideal.
-
Vertical Radiator - Towel Rails - Smart Thermostat interface
In modern houses, we now find a lot of vertical radiators - they are space savers and also act as features. In my home, I have three vertical radiators I cannot interface TADO with, its frustrating as I cannot control these rooms/areas as I can with the rest of the house. Can TADO review the interfaces and advise of a…
-
Apple Carplay / Android Auto
Develop a very simple Apple Carplay / Android Auto interface to allow basic control. e.g "Resume Schedule All Rooms" "Turn Off All Rooms" "Boost Heating All Rooms". The geofencing doesn't work well for me and this would be a good alternative.
-
A manually set temperature overrides the schedule. Let us know here if you don’t want this
I raised the following with Tado: If you indicate by geofencing that you are not at home, the heating will stop according to schedule, but not by manual settings. In other words, if you manually set the heating higher than according to the schedule and then leave, the heating will remain on. I find this very impractical…
-
Firmware update to include EMS2 support
Having upgraded my boiler to a greenstar 4000 30kW, I am disappointed to find out that tado cannot connect digitally, only via relay. There will be a lot of customers facing the same issue and this should be set as a priority to be resolved as I can’t imagine a firmware update to include the new language being too…