-
tado° app - changelog
👍️ Very positive and surprising change 👍️ Much easier to see what's coming and what to test! Hope this isn't just one off...
-
Energy iq adding readings
Hi, So I have my last 12 month meter reading and just noticed the energy iq is in meter cube or kwh and my meter is cu ft so I have converted cu ft to Kwh and added all my readings, I have also added previous tariff rates and the current one. Seems I have it all complete to track my usage and costs but I'm getting crazy…
-
Hot water turning central heating on but heating doesnt, why?
This is a new installation, have the wires been done incorrectly? I have a combi boiler so no real need for a separate hot water function.
-
Heating on all the time
Can anyone help please, my heating will not turn off, although the app states everything is set to off my boiler is firing up every couple of minutes and all the radiators are subsequently very hot 24/7. I have the wired thermostat and extension kit. I can hear the relay switching correctly when turning on/off using the…
-
Considering a Tado install and I have questions.
Hi all Im considering upgrading my home heating setup (Picture bellow) and after trying to research myself I've ended up with some conflicting information. I would like to know how best to make my boiler connection, some have said I would be better replacing the Danfoss TP5000 (Picture of internal wiring shown) for a wired…
-
Why there is a strange sound coming from Smart Radiator Thermostat V3+ ?
I have several V3+ Thermostat but one of them is making strange sound the same as can be seen here on the video https://www.reddit.com/r/tado/comments/q77ufe/what_is_this_sound_and_how_do_i_make_it_stop/ Any idea how to solve it?
-
Swapping radiator valve from manual to trv in bathroom.
Hi This is more of a plumbing question than a Tado one specifically. I’ve installed a bunch of Tado smart trvs throughout our house and have decided now to get one for the bathroom, only to find it’s a manual valve body which I understand will need to be swapped for a Tado friendly one. I bought a 15mm drayton trv body…
-
Setting up Forecast
When I had Tado installed and entered my meter readings I was able to see the graph showing usage and also a predicted forecast for my bill. I can still see the graph but not the forecast . How do I set it up to show my predicted bill again.?
-
One SRV set with a zone controller but behaves like independent
One room has just one SRV. It is set up the same as all the other rooms - with the thermostat as the zone controller, but when it “calls for heat” nothing happens unless another room is already “calling for heat”.
-
Extending TRV connection range
I've had intermittent problems with the TRV at the far end of my kitchen disconnecting intermittently since I bought in to Tado. and I'm fairly sure the problem is just distance from the bridge. I've tried all the usual suggestions including swapping for another TRV changing batteries etc etc. The only thing that seemed to…
-
Boiler not turning on
Hi, I am facing the same issue you had, Can I kindly ask how your case was solved?
-
Got a v3 wired thermostat and its cant seem to control the boiler
Just installed my V3 wired thermostat. Its replaces a Vaillant VRT 50, that is wired direct to the boiler with two cables. tado installation instructions took me through the install. Tado has been configured and connected to the internet bridge and then also connected to two wires like the existing thermostat was (to the +…
-
Heating running, thermostat sowing is not up to temp but app say it is over temp. Normal?
Hi, this is the scenario: The heating is running running (boiler and pump are working), the thermostat sowing 15.+ C, but the app shows it is already up to temp set at 17C. Is it normal? I'm running a test and can't tell what is working and what isn't. Any recommendations?
-
Does the AC heat-pump controller needd line of sight to work?
I have 4 terminals, two in a large room and one in each bedroom. I'd like to know if I can turn the heating or AC on and off and control temp in any of the rooms remotely. thanks
-
already registered problem
I bought a brand new wireless and thermostat system from Amazon. Arrived in a sealed package. After installation devices cannot be added to my home as they come up earlier registered to another home. The only way out tado gives you until they open is to uninstall the lot!!!
-
Schedule - On low all the time or off and then on when needed?
With the recent cold weather in the UK I have found it's taking a lot longer to heat up. I am at work in the daytime and when home at around 5PM with the heating off it's around 9 degrees. To then heat up to about 17-18 it takes a couple of hours. Is it cheaper to have it set to stay at around 13 while I am at work and…
-
Estimated heating consumption has stopped working!
Hi Put simply my Estimated heating consumption has stoped working. I have done everything from reinstalling the app. Taking it off all my other devices. What do I do to fix it? I have attached a screen shot and it shows a flat line when obviously with the winter weather I have used it a lot. i look forward to your…
-
Migrating from Honeywell
Hi, I currently have a Honeywell system, where I have: 1x heated floors 7x radiators throughout the house for this I have 2 wireless Honeywell controllers with a respective RJ45 gateway. So I can control/see the data using HomeAssistant. Bearing in mind I already have a ZigBee gateway (on Homeassistant for some temperature…
-
Energy IQ not Calculating
Previously my Heating Activity calc was not updating - this has now corrected. However now under Energy IQ I have had no consumption in terms of kWh or £ for the past 5 days? Anyone else?
-
Boiler heating without thermostat calling for heat
I observe a rather strange behavior of my system now: Currently, the thermostat is in absence mode. Although the temperature is still higher than that I have programmed , the boiler turns on and the flow temperature as reported by the installer application is 86 C. Does not look quite normal... I am not at home, but the…
-
Room graph shows temp rising and falling without a call for heat
Freezing temperatures outside. Room graph shows temperature rising without a call for heat. I haven’t checked if other rooms were calling for heat at this time, but if valve lets heat into rad, I’d expect to see a heat stripe in the graph and a wavy line to indicate demand. One recent day shows 12 rises (and subsequent…
-
System always heating whether CH and HW on or off
I've tried replacing the old CH & HW controller in my system with a Tado wireless receiver and wireless temperature sensor. The problem I have is that whenever the power to the system is on, the bolier runs regardless of whether the wireless temperature sensor or scheduled switching or manual overrides via the app are…
-
Replace existing T40 Honeywell Thermastat with Wired Tado for conventional boiler photos provided
Hi I couldn't find my answer with a Google or from the forum so I'm asking you experts. My setup, Ideal Classic conventional boiler with wired Honeywell T40 room thermastat and Honeywell on off heating/hot water timer in airing cupboard. I've bought the wired Tado V3+ starter kit my intention is to just replace the T40…
-
Adding radiator thermostat to brand new v3 installation "something went wrong"
Hi all, Last Friday I was newly installing my wireless starter pack with a bridge, thermostat setup. That is working perfectly. When I then wanted to add the radiator thermostat (valves) I get an error when "registering the device", "something went wrong". This issue is with all valves I have, also with cellular as wifi,…
-
HEATING ACTIVITY - Wrong Time
Hi guys! in my report looks something wrong... until a week ago, the total time of heating was right. since 11 dec the CUCINA (kitchen) is signed ON. But all heating was OFF. Even today, I turn ON studio, but looks ON the studio... is it possible to fix it or reset in someway? thanks.
-
What do I need for my house? Want a full setup with TRV but confused by my current setup
Looking for some advice on what I need please. I have a Victorian 3 level terrace and am looking to heat individual rooms instead of the whole thing. Here is what I have: Worchester Combi bolier Honeywell 2 channel programmer - 1 zone underfloor in heating in kitchen, other zone the rest of the house 2 honeywell wireless…
-
Have I Wired This Wrong? Honeywell T3 Replacement
So I’ve bought the Tado Wired Thermostat Kit V3. I have a Herz Caledonia HIU that provides a district heat service. I have a Honeywell T3 that I’m replacing with the Tado. I also have Tado smart TRVs for my radiators. I have wired it as per the instructions on the app. But my radiators don’t seems to be heating up. I’m…
-
Nefit Trendline - Hot Water
Boiler: Nefit Trendline HRC30 Hot water configuration at my Nefit Boiler: Hot Water Max Temp (60 degrees) Hot Water comfort: Eco Hot Intelligent My Tado gives me an option to schedule Hot Water Temperature. How do the 2 settings (Nefit vs Tado) relate. Does the Tado configuration only affects the Hot Water Max temperature…
-
Wired Smart Thermostat with Hot Water?
Hi all, I have a boiler that has a hot water tank. I've currently got a Nest Smart Thermostat connected to it with the HotWater component. I'm looking to switch out the entire Nest System for Tado but am not quite sure if I want the "wired" or the "wireless" thermostat - could someone assist please :) I currently have the…
-
Temperature change after changing batteries
I have two tado thermostats. They had both reported low batteries recently but were still working ok. I decide to change the batteries before they went flat. To my surprise. Both booted up and reported a room temperatures of 21 degrees. Prior to the swap they were 14-15 degrees. Now that I think about it, it does feel…