-
Tado App graph
V3+ when I tap on the icon , I can display humility or weather or HW. But curiously , by selecting weather, it’s opposite, as in selecting it makes it weather info disappear and deselect makes weather information appear Ah well, not life changing 🙃
-
Getting rid of Tado
Hi Guys, After having weeks of issues in trying to get my Tado to work I am thinking of leaving all together and switching to a different smart thermostat. My question is as I could never get my app & thermostat to actually work after my boiler decided to stop responding to it, do I literally just delete my account on the…
-
Heat only works with hot water on?
I had an electrician install my Tado and they swear they have done it correctly, but my central heating will only turn on when my hot water is on. Any idea what needs switched based on the pictures? They are saying they did it correctly and if it's not working it's an issue with the boiler, not electrical 😕
-
Problem connecting from smartphone after update
Good morning, I updated the app a couple of days ago to the current 8.26.0. Since then I have not been able to connect via smartphone. From the computer I connect to the profile and communicate with the thermostat, from the smartphone it does not allow me to log in and continually proposes the login page. This means that…
-
How to wire intergas xtreme 36 to Tado wireless receiver?
Hello, i installed a new boiler from intergas. And tryjng to install the wireless receiver, but tado do not yet have an wiring instruction for this combo. I have no clue how. Below are pictures of the panels of intergas and tado.
-
Modulating in relay mode
My tado thermostats are wired in relay to the boiler, a lot of the time the zones have 1 ‘wavey’ line and are calling for heat according to the app. The boiler doesn’t tend to start up when this happens which I’m fine with but it skews the boiler activity timings in the app. Is there a way to prevent this?
-
Moved: Tado in een oud huis
This discussion has been moved.
-
Setup modulation for underfloor heating
Hello, I have underfloor heating in my family house and have set a constant temperature of 22.5°C on the Tado V3 thermostat. Last night, the outdoor temperature was 2°C. At 1:15 am, the indoor temperature dropped to 22.5°C, and Tado started heating at the lowest level (one bar). It continued to heat at one bar from 1:15 am…
-
New boiler = new tado?
I currently have a condensing boiler with integrated hot water storage (Potterton Powermax HE) with a Tado V3+ Black Edition Wireless Heating & Hot Water Smart Thermostat Starter Kit. I'm getting the boiler replaced with a combi (Worcester Bosch Greenstar 4000). Can the existing tado unit be wired to the new combi boiler,…
-
Thermostat not adjusting actuator
Hi I am located in Sweden, I have an LK electronic underfloor heating regulated by 11 wired thermostats (Model - EBERLE RTRt-e 525 84) and I have replaced all with the tado Wired Smart Themostat. I have followed the installation instruction for the EBERLE RTRt-e 525 84 (pictures below) but since the installation of the…
-
Receiver dropping out
Installed nearly year ago and working fine. Last few days the wireless receiver drops connection to the boiler, the overide switches work and fire upnthe boiler . Randomly , it will fire it up itself. Wifi in the house is solid, boiler checked as ok , receiver wired in correctly. Any ideas please
-
Two Wireless Receiver Xs in dual zone setup
The documentation on the Tado website appears to suggest the having two Wireless Receiver Xs in a single home is not supported. However, looking at the app it would appear that rooms can be assigned different "Zone Controllers" making a dual receiver configuration possible. I'm not sure whether this is a recent app update…
-
Replace old Honeywell controller and wireless thermostat with Tado! Help!
Hi there, I have recently moved in to a property with an old Potterton 60EL boiler and a Honeywell ST499A/ST699B Central heating controller. The setup also includes a Honeywell wireless thermostat model number DT92E (I believe). This includes a thermostat control and a relay box BDR91 that is connected to the central…
-
Wrong local weather
It seems the local weather is not correct. I have a Netatmo weather station in my window, it shows 4 celsius, Tado weather for this location has 7 celsius. (Also other services shows simmilar like my Netatmo weather station). How can I correct the weather? (As the thermostat uses the local weather for turning on or off).
-
Hi can anyone help me please, I’m looking to buy the v3+ wired thermostat but wasn’t sure if its 240
:) can anyone help, is the v3+ wired thermostat 240v
-
Baxi Duo-Tec E doesn’t start the heating
Last July I changed the boiler, an old Baxi Luna goes to a Baxi Duo-Tec E. Unfortunately, the installer is not particularly technological, so I was afraid it could cause some trouble. Being July we did not have the opportunity to turn on the heating through the Tado thermostat (it arrives at a maximum of 25°C, in case…
-
Setting Up Tado X
I have just setup my Tado X system. I was too honest in saying what my old programmer was and that led to some difficulties. This was because my system is a little unusual. My heating was controlled by another smart valve system so my programmer only had 1 channel for Hot Water. I entered my one channel programmer details…
-
Could a Smart Radiator perform the role of the Wireless Temperature Sensor?
Could a Smart Radiator Thermostat not mounted on a radiator, if added to a room, perform the role of the Wireless Temperature Sensor? Because, since the cost is practically the same, I could have some spare Smart Radiator Thermostat for emergencies or in case of replacement
-
Wiring a Worcester 32cdi compact for EMS
Hi all, I could really do with your help to make sure I'm not doing something stupid. I want to switch my set-up over to using EMS on my Worcester 32cdi boiler - as currently it isn't. I'm assuming based on the pictures below I would do the following: In picture 1: I would move the grey cable in the Yellow LR CH port to…
-
Latest wireless receiver firmware?
Hi there is anyone able to confirm to me the latest firmware number for the v3+ wireless receiver? Mine is currently set to 94.2 and tado support has told me it is not the most current version. Frustrating as I am unable to change the configuration on the unit to s plan from combi and unable to control my hot water at…
-
Flow temperature
Hello everyone, is there a way to remotely view the flow temperature at a specific time?
-
is Tado server down?
When I try to use app just stuck on orange screen saying tado. It was all working earlier today. Non of the bridge, thermostat, radiator valves etc suggest there is a problem.
-
Radiators not getting hot enough so Tado never reaches temperature
Boiler: Worcester Bosch Greenstar Heatslave II 18/25 Connected to wired thermostat via two-wire digital (EMS) connection (code D17). Recently as it gets colder, Tado often does not reach the set temperature but instead hovers 1-2 degrees below. I would expect Tado to increase the flow temperature of the boiler to ensure…
-
Replacing V3 with Tado X
I am looking at replacing my current Tado set up of a V3 wired thermostat and extension to control central heating and hot water on Worcester Bosch boiler (no Open Therm) with Tado X. I already have a Thread network in my home. What do I need to make the conversion? I also have Tado radiator thermostats and V3 bridge. Will…
-
Care and protect - percentage a radiator valve is open
Hi, I have had a Tado just over a week and have a few teething problems. Firstly there can sometimes be a wifi disconnect from wireless thermostat to boiler which I hope to remedy with a WiFi extender. Secondly, I have one large room which seems to take ages to heat. It has the tado TRV and wireless thermostat in it. This…
-
How to connect Tada Smile to V3+
Hello, I have a Tada Smile boiler that has 2 wires attached to my existing thermostat: 1 red wire and 1 white wire. What should I attach these 2 wires in the new Tado V3+ smart thermostat? Thank you
-
Vitodens 100W 1BKF - Termostato intelligente Tado cablato in Opentherm
Buongiorno a tutti, preso dalla disperazione spero di trovare qualche risposta nel forum di Tado, non trovando nulla che potesse aiutarmi sul web. Ho installato una CALDAIA VITODENS 100W 1BKF 32Kw con termostato cablato intelligente Tado e 7 testine termostatiche nella casa di mia proprietà di circa 150mq su 3 piani. Mi…
-
Tado App - Edit Time block temperature
Just went to edit a time block on a thermostat schedule in the app, and instead of the usual temperature range, it says that the current setting of 20deg is now 0.8deg and the scroll wheel to change it goes from 0 to 7 degrees. Looks like a dodgy software or firmware update to me? Only appeared today. Can someone from Tado…
-
Connection Issue...maybe?
Hi Everyone, I have been using (or trying to use) Tado for the last 3 months, got installed early September and have a V3 Setup, with Wireless Receiver, Internet Bridge, 1 Wireless Temp Sensor, and 4 (with 4 more to connect still) Smart Radiator Thermostats. All connected, and working according to the app. My issue has…
-
Working up Tado V3
Can anyone help with which wires go where in the Tado, the existing Drayton on has 2 wires connected brown in COM and brown sleeved black in NO. There is a blue sleaved grey wire and an earth wire in the back that are not used in the existing thermostat