-
TADO Thermostat Integration with Heating Setup: Guidance Required
Current setup details: 1. Bathroom Dual Control Switch: Indicator for “sink” and “bath” with light indication upon operation. Used for hot water cylinder with electricity. 2. Vortex Boilerhouse: • Electrical Supply: 230V 50Hz • Output Options: 15.0 kW to 26.0 kW • Pump Pressure: 10.0 • Fuel Type: Kerosene 3. Manual Timer…
-
Vaillant EcoTec Pro 24 - plugged in
Does anyone have Tado set up with the EcoTec Pro 24 WITHOUT having to plug the receiver into a mains socket? IE Have you been able to wire the receiver directly into the boilers electricity supply instead? Thanks in advance
-
New installation with Vaillant - questions and doubts
Hi! I've decided it's time to upgrade my old heating installation with some smart devices. Tado seems the obvious choice, but I would like to make mysefl sure about a few things, before I spend a lot of money on it. Current situation: I have a Vaillant ecotec plus VC PL 246/3-5 with calormatic VRC 430 installed right into…
-
Tado wired thermostat not working
I have installed a new Tado smart thermostat wired, however the thermostat does not trigger the boiler to go on. I have a Netfit Topline Compact 25 HRC CW4 boiler. I am not sure what control interface I have and what to select on the Config Menu ID. But I have tried multiple configs and stil does not work. Any suggestions?
-
Access to tenants
To allow tenants to use the system, I have to currently give them full access including administrator privileges. Please introduce a feature whereby users can be added that can use the system and control heating without having administrator authority. Thanks
-
Boiler does not switch on
Just installed my new Tado wireless plus receiver. (No other devices) select temperature on APP or wireless thermostat, LED for heat comes on, CHNO becomes live but boiler does not fire. It is a Baxi Combi which works for running hot water so boiler ok. Was working fine with wired thermostat this morning and wiring looks…
-
Coping with multiple zones
My newly built home has three zones downstairs for the underfloor heating. These have been easily set up with Tado wired thermostats and all’s well. Upstairs there are the bedroom radiators on one zone valve, one for the bathroom towel rails and a valve for the hot water. The bedroom thermostat (a Honeywell T3R) is…
-
Thick house walls Bridge not connecting
Hi I have 4 TRVs and my bridge is connected to the internet. The property has very thick stone walls and only 2 of the TRVs are able to connect to the bridge. Is there a solution for this? Thanks
-
Can Tado work without a Thermostat as Boiler Controller
I have a biomass boiler which heats water in a buffer tank, which is used to supply both the central heating ( a mix of radiators and underfloor heating) and to heat the domestic hot water tank. The boiler has its own control system, which turns the boiler on and off based on the temperature sensor attached to the buffer…
-
Controllers
Hi all does know why my wireless controller says connected but my bridge is constantly saying pairing ?
-
Alexa Country Skills for more countries
Many of use use Alexa to have content from home countries even when living abroad. I for example use my Indian account with Alexa. Unfortunately the Tado skill has not been enabled in Alexa India and therefore I can't integrate my Tado devices to work with Alexa which is a shame.
-
Please can someone help!!
Hi We had a new boiler installed in our house in the summer. We also had a new Tado system installed, with 8 TRVs, 1 smart thermostat (boiler room) and 1 temperature sensor (downstairs). I am really confused about it and the installers did not explain it properly. Historically, there were two zones in the house, downstairs…
-
Open Term vs Relay Connection to Boiler
Hello I am considering purchasing a Tado "Starter Kit – Wireless Smart Thermostat V3+" and lots of "Smart Radiator Thermostat V3+s". My boiler is a "Remeha Avanta 30s", S-Plan with an external Megaflow hot water tank. Before I purchase I have 3 questions I hope someone can answer: 1) Does the Wireless receiver in the…
-
Open Window Reminder Notification
How often do you forget to close a window? It happens constantly to me that I open a window and totally forget about it. Tado of course detects the open window and pauses heating for 15 minutes. But after the timer expires, Tado resumes heating despite the window still being open. Therefore, I would suggest to add a…
-
Control4 Driver
I don’t know if this has been brought up but it’s 2022 and Tado either needs to make a Control4 driver and make the API easily available. My integrator shouldn’t have to search the internet to find the api.
-
Tado keeps turning on/off the boiler all the time
I have a temperature sensor with smart thermostat and 3 other smart thermostats in 3 different rooms. At night I leave 2 of them around 18 degrees and one at 20 degree. My bill last 10days been around £200, what I see is different tado thermostats and sensor turning the boiler on even for 0.1 degree difference in set…
-
Geo location and away/ holiday mode
I'm being told different things. I'm looking to purchase tado thermostat buy I'm keen to know the following Geo location Holiday mode If I turn geolocation on, I understand I can set up to be aware I'm x metres, x miles from my house but does it turn off the heating and / or water completely In the summer ( water only) and…
-
Faulty radiator valve - help required
Hi guys, My system has been operating fine for nearly a year, but now one of the SRV's keeps indicating battery replacement required, only hours after new batteries have been fitted. I thought maybe the mechanical valve was sticking and causing problems, so I swapped the SRV head with one from another room, but the fault…
-
Setting Smart Valves to no zone controller
Hi there, So in my system I have a tado wired smart stat in living room that controls all 3 zones on the ufh downstairs but will also heat rads too if on. I've fitted 5 smart valves upstairs that currently have the living room stat set as their zone controller. So whenever a rad needs heat obviously the ufh will come on.…
-
Smart Meter
is there or will there be a method for Tado to automatically pick up smart meter data and/or data from utility supplier. I don't want to enter my smart meter readings all the time or tarrifs per Kwh. My tarrif is base on wholesale prices and changes everyday.
-
Install query
Hi, just tried installing the Tado wireless thermostat starter kit. The reason for this is that my Salus RT300 Series thermostat and radio receiver no longer are communicating. As per instruction I removed the wiring from my Drayton lifestyle lp3 controller, then labelled the wires in. However the next instruction advised…
-
Receiver substitution
Hello! I am trying to install the Tado wireless receiver in my boiler, where my old receiver was. However, I do not know which wires to connect and how. If you could explain why those wires go into those specific slots, I would really appreciate it as well. My old receiver is a Delta Dore and the thermostat controller is a…
-
SRV Temperature Offset...
Something I can't get my head around so hoping someone with more knowledge than I do has a solution: We have a room, our lounge, that is 6.65 metres by 3.76. It has two double radiators, one under the front window and another at right angles to be patio door at the rear of the room. One radiator, the one under the window…
-
Install / New Product Query
Hi All, about to buy and then install Tado at home. I need a V3 wireless including hot water starter kit and a wired add smart thermostat -- about £320 in the UK from Tado website. Screwfix offer what looks to be the same at almost half the price. Anyone know if these are one of the same product / version -- i.e. I am…
-
How can I wire the Tado wireless receiver in place of my old on
Hello! I am trying to install the Tado wireless receiver in my boiler, where my old receiver was. However, I do not know which wires to connect and how. If you could explain why those wires go into those specific slots, I would really appreciate it as well. My old receiver is a Delta Dore and the thermostat controller is a…
-
Heating on permanently
I installed a tado home system a few months ago. Tested the system and all worked OK. We have been using the hot water program fine ever since. Turned on the heating a few evenings ago and after an hour or so we noticed that the heating wasn’t responding to the thermostat and was on permanently. The only way to turn it off…
-
Turn on heating of a room
I have a problem and I would like to seek advice on how to fix it. I am expecting if I want to turn on heating of a specific room, for example, Living Room, I change the target temperature of the Living Room from the app, and that's it! In fact, when I changed the target temperature of Living Room to, let say, 20C, I could…
-
TRV does not react to commands
Hi all, one of my TRVs fitted with an m28x1.5 adapter is calibrating correctly but will not react to commands whether manual or via the app. And that includes turning up the heat or down. The motor inside doesn't move even though i can hear it during calibration. I tried a spare TRV i have too and it wont react either. So…
-
Why is my radiator thermostat not working?
In our home office we have fitted a new aluminium radiator. The Tado thermostat will calibrate but won't function, manually or via the app. I've fitted it to another radiator and it works fine. I've taken another working one from elsewhere in the house, but when fitted to the office radiator, it also won't function. Any…
-
1970-ties house heat loss
Hello all, Recently had Tado installed in my terraced house on the North East coast of Scotland (constructed in the 1970-ties) with pebbles dashed concrete blockwork, thin 5cm wall cavity void (filled with polystyrene beads), and some glass fibre insulation in the loft space (originally 25 cm) installed about 25 years ago.…