-
Help!
I’ve installed this Tado and extension kit for a customer. I cannot fathom out how it controls a hot water valve. There’s no instructions and I’ve had to download all sorts on my phone to even get the instructions. I’m really not happy with the customer service, it’s impossible to talk to anyone or get any information. I…
-
Traploze aanvoertemperatuur
Momenteel wordt de aanvoertemperatuur aangestuurd in stappen van hele graden Celsius, kleinere stappen of traploos zou pendelgedrag behoorlijk kunnen verminderen.
-
Please set more home control
Hi everyone, i think it s must to have a multiple home control from the app tado, i have many tado devices but when i found out it was impossible it has been one of the worst nightmare. How is that possible. I think it s obvious to let people control another house, as example, the holiday house in the mountains… i hope it…
-
Valve pin position indicator
My Bosch system which I got rid of in favor of Tado included in the app a place where you could see the position of the valve pin. This was useful to determine if TRV was fully opening or closing the valve pin and other temperature issues. I think this would be useful on the Tado system as well
-
Firmware update to include EMS2 support
Having upgraded my boiler to a greenstar 4000 30kW, I am disappointed to find out that tado cannot connect digitally, only via relay. There will be a lot of customers facing the same issue and this should be set as a priority to be resolved as I can’t imagine a firmware update to include the new language being too…
-
Improve feedback in app when geo fencing stops working
Yesterday when I got back home from work the temperature in our house was very low. I checked the Tado app and it showed that Tado was working in 'away' mode for the full day while my wife, that has Tado on her phone, was home all day. Last week everything was still working fine so I checked the Tado app on her phone. When…
-
Multi home support
Still waiting after all these years
-
Integrate with smart meter
Stop wasting my time with app notifications to key my meter reading to get smart eq working
-
Temporary manual override for childlock on TRV
I would love to have the ability to configure an override code to allow adjusting the temperature on my child locked Smart Radiator Thermostat without using the app. The override code should be first configured via the app and could consist of for example three numbers indicating how many clicks the TRV needs to be turned…
-
Draadloze Temperatuursensor ook met deel graden laten werken
Ik vind het storend dat als ik in de app mijn max temperatuur op 20,5 graad zet, de draadloze temperatuursensor toch de kamer laat verwarmen naar 21 graden. Met de radiator knoppen gaat dit wel goed. Zelfs met tiende graden instelbaar. Waarom neemt de draadloze temperatuursensor dan niet de ingestelde temperatuur in tiende…
-
Show amount of hot water available
Not sure if this is possible, but with all the tech these days, why can’t the app show you how much hot water you have available and therefore you know if you need to heat it up before you actually run out. Based on your usage it could even suggest and automate schedule. Seems quite simple!
-
Interazione pompa calore irragiamento
Per la gestione tramite Tado degli split pompa di calore, sarebbe molto interessante un interfaccia con un sensore di irraggiamento, da installare, in modo da fare funzionare gli stessi solo quando il fotovoltaico produce una quantità decisa dall' utente. Potrebbe anche andare bene una lettura della produzione di energia…
-
improve Care&Protect by reading bus-codes (OT)
care & protect is currently not reading out bus codes which display the error codes on my heater/boiler (Nefit Proline HRC24 - OpenTherm). In my recent case this led to low system pressure which I was not aware of and could damage the heater. luckily I found out quite early. Despite the heating request to the heater, the…
-
All rooms temporal scheduling
Sometimes you need to set a schedule for all the rooms just for a while, or just for one day because it is a holiday and everyone is in the house, and the reset it with the touch of a button to keep the regular schedule. I think having a button to set a temporal schedule for all the rooms would be useful, instead of…
-
Économie Energie
Bonjour, Il serait intéressant voir nécessaire de pouvoir éteindre les leds du switch internet comme sur la plupart des box et autre objet connecté
-
Merged: Multiple homes
This discussion has been merged.
-
Simple UI improvements
Great system, nice app. Here are my suggestions on how you could improve the user interface (UI) in the mobile app for better usability and utility. In order of impact to the experience: Show humidity readings for each room on the Home view tiles - this would give more utility than the current solution - having to tap down…
-
Individual Radiator TRV Control
It would be extremely useful if there was a way to set individual radiator smart thermostats to away or home mode. There are times when out of the house and others are still in but will only use certain rooms but if they are on app the whole house will be regarded as "at home" under the geo fencing rule. Also when kids are…
-
Smart AC control to activate AC based on room temperature
Given the user is deleted I will restart the thread. The Original suggestion: "Currently the Smart AC control turns on the AC unit at the start of a time block, regardless of the temperature. In my opinion that's a major flaw, because most (all?) home AC units still run their fan even if the room temperature is below the…
-
Trv/thermostat assigned to user
Hi, It would be a good feature to be asked to assign certain trv/thermostat to hinge and away assist, e.g. my office only needs to be warned when I'm home.
-
Función Multi-Vivienda
Agradecería se desarrollara la función multi-vivienda que permita controlar 2 o más casas con la misma cuenta y el mismo dispositivo. Ahora sólo puede hacerse con cuentas distintas y cerrando una cuando se quiere acceder a la otra. Gracias!!
-
Graphs do not print correctly
When printing from Windows the graph does not fit the page correctly.
-
3rd party temperature sensor support or cheaper add-on temperature sensor
I have multiple tado radiator thermostats, but all of them are a couple of degrees out with the actual temperature. I use an Aqara temperature sensor to measure the actual temperature in the room, further away from my radiator. It would be great if the tado app could use the data of these aqara sensors to measure the…
-
Phone support
I've just installed a Tado system. I have a number of issues and opened a chat this morning which had "a few hours" at the top of the page. I expected someone would contact me by the end of the day but that hasn't happened. Presumably it'll be Monday at the earliest before anybody gets in touch. It is unacceptable to pay…
-
2023/12 - Change App Schedule Colours to Match Tabs
The tab colours are great but the schedule summary bars are not. Can you change the schedule colours to match the tabs? Example: 18 degrees on a tab has a clear distinct colour but on the schedule bar it is a bland indistinct grey (3rd and 5th block on the right on the attached images).
-
Catalan language
As a Tado's thermostat owner and Catalan speaker, I want purpose you the new idea to add Catalan language in your app. Catalan language is known for about 10 million people (from Spain, France and Italy) so it would be great for Catalan speakers enjoy Tado's apps in their own language as other European people do. Thank you.
-
Mesh system
I have a very long house with thick stone walls so the internet bridge cannot reach all my radiators. My internet system uses a mesh system to get WiFi to all areas of my home I was hoping that this type of system could be used by tado to solve my problems.
-
Minimum TRV level
When a TRV is closed down to less than 5% it probably doesn’t allow any significant flow and is effectively off. However, it still calls for heat, and the heat source continues to run when it may not be needed. It would be useful if the TRV closed fully once it reached a minimum threshold.
-
Battery Monitor Improvements
As a suggestion, there needs to be better battery level monitoring\reporting between the Tado application and devices. I have noticed in recent weeks that devices are reporting battery levels as "Good" but then are malfunctioning due to suspected low battery life, which is then confirmed when you re-insert the batteries…
-
Personalised Boost heating
Is there any chance to personalise the boost heating option? Option to program time and temperature for the "Boost heating" would be useful feature