-
Swipe from left to close room thermostat pop-up for Tado app on iPhone
When clicking on any of the rooms to change the temperature, I have to somewhat awkwardly (or use my other hand) press the little cross in the top left corner. It would be a lot easier if I could either swipe from the left to go back, or swipe down to close (as it comes in from the bottom). Other than that I think the app…
-
Low/High humidity notifications
Would be great for Tado app to send a notification when a room has low or high Humidity, with the ability to set the level that the notification can be triggered.
-
Verhoog de maximale instelbare ruimtetemperatuur
Graag de maximale instelbare ruimtetemperatuur verhogen.. dan wordt het installeren in de zomer eenvoudiger.. anders moet je de thermostaten in de koelkast leggen om het systeem te testen.. Als je deze maximaal 35 graden kan zetten dan heb je geen probleem met instellen..
-
Batterijen Tado leeg.. deze batterijen zijn de beste vervangers..
Als de batterijen leeg zijn, vervang ze dan door oplaadbare batterijen 1,5 volt lithium.. Wel zo duurzaam en gaan een leven lang mee... stop de verspilling.. https://amzn.to/396MPaC
-
Humidity correction
Discovered a function to set the room temperature correction and would like to have a function to set the a correction for the humidity
-
Multiple households
Pretty sure this idea already been suggested in the past, but I still want to re-suggest the idea. A function to manage several households with one account would be really useful for many users.
-
origin of an order
Virtual assistants are increasingly present in homes. And Tado, interact with them very easily. It would be a very valuable information if, in the activity graph, in addition to other information (temperature, humidity, climate ...) the origin of a machine start-up order could be reflected. And so, to know if it has been…
-
Summer mode
My son has a Netatmo system and during the summer, the connected valves calibrate every 2 weeks, even when the thermostat is off, so that the thermostatic heads do not get calcified or stuck (which may happen if the valve is fully closed for a couple months). With Tado, I need to take all my programming to put the valves…
-
New hardware product: controller for electric underfloor heating
Please consider adding a new item of hardware to your set of products; a controller for underfloor heating. Such a unit should: Be able to switch at least 16A. Have an integrated air temperature sensor. Have connections for an underfloor temperature probe. Support operation in 3 modes; air temp only, floor temp only and…
-
SUMMER MAINTENANCE CYCLE
Tado needs the following. A way of cycling all the valves at least once a week during summer, and running the central heating for a couple of minutes to prevent valves seizing, to prevent pumps calcifying in hard water areas, and to prevent dead spots where sludge settles and to cycle inhibitor. All that is needed is a 10…
-
Gentle heating curve
Find it more pleasant when tado° heats my room slowly (as it does if the set-point is just 1° above the current temp on a smart TRV). Would be great to have a way to choose to have it heat up gently in this way (i.e. presumably with a lower flow rate) all the time.
-
Away Mode (Pet friendly)
The away mode is great, but I a have a cat and maybe it could be great to have an away mode “pet friendly”. Making sure that the house is neither extremly cold or hot so my pet is confy in it.
-
Support for Matter standards to allow full interop across Smart Home systems
Full support and integration with the Matter standards https://buildwithmatter.com as the standards develop and get published - ideally without having to upgrade the hub, etc.
-
Wireless Receiver supporting more heating Relays (multi zone)
I have a Wavin ahc 9000 controlling my underfloor heating system. As I understand it I can use the wireless receiver to control one channel of the wavin ahc 9000. All the other channels need to have wired connections to the tado smart thermostats. But in my case I have everything wireless, so I can only control 1 rooms…
-
Mac M1 App
Bring the iOS Tado app to the Mac AppStore to use the features in which HomeKit doesn't support (Ie. Override Timer, energy reports, timer settings). When we had access to run these apps pre MacOS 14.2 or 14.3 tado was one of the best apps to use via MacOS for M1 devices which saved me from hunting down my iOS device. It…
-
Integration with Verisure
I’ve recently discovered that Verisure devices (alarm) placed in different areas of the house also record temperature and would love it if it would be possible for tado to use this information as well.
-
Future request: please add AUTO mode to Tado smart AC
Hi, I would love to have also AUTO mode beside COOLING, DRY, HEATING and FAN in the tado app and also if possible in HomeKit too maybe we are more people willing that it will happen
-
Improve readability of serial numbers in the iOS app
The serial numbers in the iOS app are displayed in fairly small, grey text. They are only really readable for people with perfect eyesight — even with my reading glasses on, I struggled. Could the font size be increased, and the colour changed to something much darker to provide better contrast — if not on the device list…
-
Option for Valve fully Open as max temp is only 25°c
As you can only set temperature to a maximum 25°c, after that can we have a fully open valve option. Yes sometimes some of us want hotter than 25°c
-
Battery log
I have a couple of dozen devices. I'm changing batteries all the time. I can't remember when I changed batteries last. This is information that's useful to know – to monitor the quality of batteries, or usage of the devices. There's no way to do this with the current app. You change dead batteries, and if the time and date…
-
Use Smart AC Control also as a temperature sensor for smart radiator thermostats
I have a room with both AC (controlled by a TADO Smart AC control) and a radiator (with a TADO smart radiator thermostat). The room is big and the temperature around the radiator in the winter is not what most of us using the room feel. The TADO Smart AC control is instead in a place where temperature can be sampled more…
-
Add an Alexa feature: "Alexa, what is the humidity in the living room/bedroom/etc"
The Tado app clearly shows that humidity is being tracked. We can see the humidity in all the rooms. So those sensors are already present in the Tado devices. Yet, I can't ask Alexa to tell me what the humidity is. I'm a programmer, and I know that this wouldn't take a great deal of programming to implement. So I'm…
-
TRVs for bathrooms
I know you have https://support.tado.com/en/articles/3403596-can-i-use-tado-in-my-bathroom but it would be nice to have some for smaller bathrooms (i.e. where the towel rail is <1m from the shower.
-
an option operating mode working like a signal generator just like the physical remote control
when I ask Siri to turn on the air conditioner, tado sends out turn-on signal. when I ask Siri to turn off the air conditioner, tado sends out turn-off signal. lower, raise the temperature by one degree, two degrees ... set the air conditioner temp to xx degrees ... no matter what state tado is in. This mode replaces a…
-
Set the "Sleep" functionality of my Midea Air Condition from the App
Issue The air condition Midea Silent Cool 26 Pro WF is equipped with a so-called "Sleep" functionality. Activating the feature via the included remote control or on the device itself makes the AC turn into a more silent operation mode, the fan speed is set to "Auto". Tado is not respecting this setting and is always…
-
Set the "Follow Me" functionality of my Midea Air Condition from the App
Issue The air condition Midea Silent Cool 26 Pro WF is equipped with a so-called "Follow Me" functionality. Activating the feature via the included remote control or on the device itself makes the AC use the remote control's temperature sensor to measure at the location of the RC. Tado is not respecting this setting and is…
-
Smart Temperature Sensor in Homekit
I really wish that Tado Temperature Sensor was treaded as Temperature/Humidity Sensor in HomeKit rather then Thermostat. It’s useless in Home app tbh and it has humidity hidden from Status bar. Also it creates useless tile in home. I realy had to use one in one room and now i have 2 thermostats.
-
Adjust temperature or Boost Heating feature
Boost Heating is useful but the default 25C value is, in my opinion, too high. I would like to be able to change this, eg. To 22C.
-
Reading out Smart Energy Meter
Dear TADO development, Im am trying to make my Eneco TOON redundant and have it replaced by TADO, however what I would miss the most would be the Smart Energy Meter readings (day, week, month, Year) both Power and Gas consumption. This is not a nice to have function if you claim to reduce energy consumption. The saving…
-
Provide estimated gas consumption from the boiler
Where possible and depending on the boiler model, would very useful to get an estimate on gas usage if the boiler can provide such.