-
Inputting heating bill for oil kerosene top up.
Is it sensible to firstly input the previous year's oil consumption and average price before we input the last heating bill. Do we use units ie is a unit a litre. Oil is 10kw/litre or is a unit a kw? What's anyone else doing? I have asked via the bot but not got an answer yet.
-
Support current and more recent Vaillant eBus controllers
Tado asserts the benefits of modulating boiler control and touts compatibility with Valiant and eBus. However, the reality is rather grim. It turns out that as of 2019-03 eBus is only supported in these scenarios using the now discontinued VR65 controller. No other controllers are supported (VR66 for example). This means…
-
Second home problem
It is, as I have found from Taco support, possible to control 2 homes from the Tado app. However, to do this, one has to log out and then log in to the second home using a different email address as a username. With his quality product, I'm surprised that Tado haven't addressed this problem in their app.
-
Single graph to show when heating was called
I have an interesting situation where according to my gas meter I'm using gas during the night, however there's no simple way to see which room is causing this to be triggered without looking at each graph in turn. Can we have a single graph which shows when heating was called for each room please.
-
Turn on radiator valve for maintenance
Not sure if this is already implemented but I couldn't find it. It would be nice if we can open the radiator valves for maintenance even if the temperature is way above 25º. I needed to manually open all the radiator valves for maintenance.
-
aircon control should be battery powered as per thermostats
I am disappointed that the aircon control needs continuous mains power and not battery as per thermostats
-
Modify Limits of Room Temperature Control
Is it possible to modify the upper limit of the Heating Temperature in the Smart Thermostat (it is currently restricted to 25 degrees Centigrade)?
-
Varios termostatos y varias válvulas termostáticas
Buenos días.yo ya tengo en dos viviendas los termostatos y cabezales termostaáticos Mi duda es la siguiente.Tengo un hotel con tres zonas gobernadas por bombas y termostatos independientes .Quiero montar Todo cableado.Mi duda es la siguiente: *Quiero poner en cada habitación una válvula termostáticamente .Puedo hacer q…
-
Summer/Winter Mode
The app should have a summer mode which, once activated, amends all schedules down by a predetermined amount, to counter ambient temperatures. For example, 22 degrees in winter feels comfortable, whereas 22 degrees in summer feels too hot. This is due to ambient temperatures, which affect heat retention. Now that temps…
-
Notification
Can we have a notification when someone turns heating on please.
-
Low/High humidity notifications
Would be great for Tado app to send a notification when a room has low or high Humidity, with the ability to set the level that the notification can be triggered.
-
my.tado.com : support for 2FA
Hi. There is a ETA for support 2FA for the accesso to my.tado.com ? Best regards
-
New gas meter in Energy IQ
In Energy IQ add the possibility to start meter readings back at zero after installation of a new gas meter. At the moment you have to delete your complete history before starting back at zero.
-
Relay and Opentherm together
The Tado extension kit can control the boiler through a relay (simple on-off switch) or through the Opentherm bus. The bus allows for better temperature stability and higher efficiency as it tells the boiler to turn the heating up or down as necessary. If a heating system contains other elements, like a shut-off valve or…
-
[Bug][App][Android] Toolbar behind statusbar
I'd like to report a visual bug in the tado app. I'm an android software engineer myself, so here is the technical bug report: The top of the climate comfort activity/fragment (page) is partly hidden behind the status bar, so either the windowInsets are incorrect, or the toolbar is missing the top padding with the size of…
-
[Bug][App][Android] Incorrect airco vertical swing icon
When selecting the vertical swing for my airconditioning, it shows me the wrong icon for mid-down. It's the same as mid. The screen after does show the correct icon for that setting. Screenshot: https://photos.app.goo.gl/kQB2HnjwytG8utQN6
-
Schedule that is NOT internet dependent (safer)!
If you are on holiday and your internet drops, Tado continues with whatever setting it had at the time. In other words, your hot water could be ON for the rest of your holiday, not a good thing (and you will not know about it as you no longer have remote access). This is the one flaw I find in Tado. It appears that…
-
Improve wireless temperature sensor clip
The clip that attaches the unit to the wall mount (backplate) does not hold the unit in place well enough. Even when taking the unit out of the original packaging the clip didn't hold the backplate and the sensor device together. It's only a 1/4mm half spherical bump and doesn't seat strongly enough. I reported this to…
-
2FA / MFA - EU legal requirement
Hi, I've created a new post to again highlight the importance of this to Tado. Without 2 factor authentication/MFA, Tado will soon be in breach of EU law. In 2022, the EU Commission proposed the Cybersecurity Resilience Act (CRA) which introduces mandatory cyber controls to, amongst other things, IoT devices including Tado…
-
More detail on device errors - Wireless Receiver
Quite often the Wireless Receiver is showing 'device errors' (blinking hazard light) but none of the devices actually have any issue. I believe that this condition is also explained by the fact that a software update may be in progress. However, this is not at all obvious. It would be really good if there was an option to…
-
Display on/off on home screen
It would be good if we can see which radiator is on or off without having to click into the room.
-
Comfort Zone - Change comfort temperature display
I find 20 degrees too hot for “comfort” and prefer to be able to adjust when it shows as orange and when it’s too cold or hot for ME. Comfort zone is a known Zone, not absolute and different for different people, what is hot for one person might be cold for another. Our comfort temperature changes in response to the…
-
Unlock SRT manually
Would it be possible to allow a feature (that can be activated or not) to manually unlock the SRT using a 3 digit “code”. You could configure a code in the app and then input it using the SRT, turning it up and down in a certain sequence (like for safe) to input the code to unlock it when you don’t have your phone.
-
Master temperature
I’d love it if there was a way to have a unified master temperature. It’s always baffled me why you would not have the option to set the temperature of the rooms/thermostat and then just alter the on off times.
-
Samsung Smartthings
Hey How do i get Tado radiator to work with Samsung Smartthings - I tried both smartthings app(classic) but no luck :(
-
Heating to text size
Please make the heating to text size and font colour more readable.
-
Add Sunrise/Sunset to Graphs
By adding sunrise and sunset to graphs would allow most novice users to understand the natural thermal gain/loss purely from outside temperature and pressure on their homes and differences to different rooms. B)
-
Bring back Modulation (OpenTherm) to their wireless thermostat (UK)
Currently only the wired version supports modulation (OpenTherm) where as the wireless version in the UK ONLY does not support modulation. The EU version does. I think Tado should bring the EU version features to the UK product. It's essential for energy saving and would add more competition to the market and make Tado…
-
Hot water control when away
At present if your geolocation setting is set to away then the hot water status can either be on (constantly) or off. This does not work well if you have a regular heating pattern for water (say 3 times a day) and you are out during one time period which stops the heating cycle. It would be better to give an option to…
-
Away mode schedule
It would be great if Tado would support an away mode schedule: a schedule that only operates when away mode is triggered, instead of the current single away mode temperature. My use case: due to dynamic energy pricing it is wise to start heating around noon, even if I'm away. But if I'm home in the morning than heating…