-
Being able to quickly apply different heating schedules
Tado app provides three heating schedules (away, all on, all off). Those are nice but not enough. It would be great to be able to define custom heating schedules (i.e one for the rooms which are inhabited all day long and another for sleeping rooms). Dear community users, vote this suggestion to make sure Tado takes notice…
-
AI based scheduling assistant
I find setting up the schedules a little bit clunky as I have 8 thermostats to set up so I wondered whether there was scope to instead have the app ask you a few questions and then set up the schedule for you. Such as it could start with asking a series of questions about which room do you sleep in. What time do you get up…
-
TadoX Hot Water Matter Stream
Previous generations allowed hot water control via Alexa. No option to configure a matter stream for the hot water in Y/S plan configurations. Seems like a missing feature to me and isn't mentioned as a down side to upgrading to Tado X. Would love to have this feature added so that I can have the same functionality as I…
-
smaller wireless temperature sensor X with e-ink display
I just bought wireless smart thermostat X starter kit with few smart radiator thermostats X. It is connected since yesterday and works flawlessly so far. There is one thing, I changed my old immergas thermostat to tado wireless and it is so big and bulky on the wall, shows nothing if not touched, looks like little outdated…
-
Timing of self-calibration
From time to time, I've heard different (Tado X) TRVs go through what I think is a self-calibration routine whereby it adjusts the valve in and out in small increments. While I agree this is a useful feature, it's not great when it happens in the bedroom in the middle of the night ;) Might it be worth setting this up as a…
-
Dry Mode Getting Jammed Home Assistant AC V3+
Dry mode is getting jammed on my Home Assistant instance. Won't allow any changes of mode from the App or Home Assistant after a period of time. The only way to get drying to show up on my home assistant thermostat card, with my Daikin is by: Setting up my Tado Smart Schedule with the Dry setting on. Activating Auto Mode…
-
"Summer/Cooling mode" for wall thermostat
Hi there, I have an underfloor heating with a cooling function. In summer, cool water can run through the floor to cool the room. For that I currently need to set the temperature to max (25°C) to keep the thermostats open. If the room temperature would rise above 25°C the thermostats would close and prohibit a cooling…
-
Guest mode
There could be an option for guest mode, which would use a different schedule.
-
Away mode planner by date/hour (agenda)
Away mode is one of the reasons for us to buy into Tado to remotely turn the house heating down when we leave for a day, weekend or multi-week holidays and forgot to do so before leaving. Though it happens more than I like that after 1 or 2 days after leaving the house, we only think about having forgotten enabling the…
-
Nickname for Bridges
If there is more than one Bridge in an X system, it would be very convenient to be able to provide an identifying nickname for each..
-
Central heating possibility to set the off heating hours with tado X...
I live in a building and we have a central heating system with 14 hours of heating a day. I have 12 valve and 11 wireless tado x sensors. It would be good to "tell" tado the hours in which the central heating is off so when I'm away and i put 15 degree of minimal temperature the tado software knows that it can heat only in…
-
Boost Heating - Timeframe Options
When selecting Boost All Radiators, it would be helpful to allow this to be configured to a timeframe of your choice. Pre-defined options like +30mins, +45mins, +1hr etc could even be options further along the side scroll where you can find the current options.
-
Notification when others make changes
As the primary user I have added family members to the account to control the heating, but sometimes they make silly changes and only find out about them later. Would be good to have a notification when other people in the home you invited make a change.
-
Add humidity in the tiles
The current tiles have enough room to add more information like humidity. Additionally you could a a toggle in the settings to toggle on/off certain displays.
-
Automatically go back on schedule
This drives me insane that this isn't a feature with tado! My partner has a habit of messing with the heating and knocking it off schedule to turn it either up or down, which of course takes it off its custom schedules, now the problem is that we forget that it's been taken off its schedule then we realise the heating has…
-
Make the source of Open Window notifications easily (or ineed at all) discoverable
The current tado app for Android gives Open Window notifications if this is set up for rooms. If such a notification follows, you as a user want to know which room the notification applies to. However, the notifications only say that an open window has been detected, but do not provide information about where. Tapping the…
-
Open Window detected
I am on occasion advised by my TADO app that a window is open. In a house with 10 TADO thermostats with a ground and first floor it would be decidedly helpful if the icon connected with a particular thermostat in a particular room has a small message displayed on the icon so I can see in which room a window has been…
-
Feature Request
Please would you expose the following commands to HomeKit so that I can fully exploit the functionality of Tado AC. Could you add the following additional modes? Auto Fan Dry Cool Heat
-
Individual Room Boost Request
Hey, Would it be possible to implement a solution, where heating for an individual room only could be boosted? Currently, this is missing from the app, as you can only hit a button to boost all rooms at once and then you have to untick the ones that you are not interested in. Which is a bit cumbersome. The only tweak I…
-
Koelen door radiator knop open te zetten
Het zou mooi zijn als de radiator knoppen en stand hebben waarin het ventiel open staat, zodat een warmtepomp koud water door de radiatoren en vloerverwarming kan blazen. Ik schroef nu alle knoppen in de zomer eraf, dat werkt. Maar zou toch niet nodig moeten zijn.
-
Verwarmen voor thuiskomst
Deze feature, die bij afwezigheid zorgt dat je huis weer op temperatuur is als je thuiskomt, werkte in V3, maar is in X niet beschikbaar. Zou prettig zijn als die z.s.m. wordt gerealiseerd.
-
Group rooms into "areas"/"zones"/"events"
To be able to change temperatures settings to predefined levels in several rooms simultaneously depending on time of the day or an event e.g. an event could be "going to bed earlier" -> increase temp in bathroom and sleeping room while turning off heating in living room and kitchen. An area could be "home office" and would…
-
Disable TRV "calibration" when offset is changed [required for using external sensor]
As you may have read elsewhere on this forum, myself and other Tado users have been working on ways to make Tado TRVs more usable by using cheaper external sensor to read the actual room temperature and dinamically update the temperature offset of the valves with great results. The only drawback of that is that we have to…
-
Notifications for high and low room temps.
There have been a few occasions when a Tado smart radiator valve has come loose from the radiator and allowed unrestricted flow. This resulted in the room overheating. To identify when this happened used IFTTT to monitor room temp and alert me if they were too high or too low. I want to reduce my reliance on IFTTT and I…
-
Reset/Restart function
Recently, I had a lot of problem with devices going offline, or after I reconfigured my Tado network, the devices would go out of sync, and the result was the Tado network not functioning correctly. The best way to clear the problem is to reset the Tado network and restart all the devices one by one manually, but that…
-
Hot water issue
I have a Worcester Heatslave 15/19. It's old and requires the heating to temporarily stop powering to allow the water to heat up. Since installing Tado V3 I rarely get hot water. I think the Tado system is not allowing the boiler to shut off the heating to power the hot water. How do I fix this?
-
Swipe to switch between rooms
Or be able to change temperature from the view with all rooms.
-
TRV thermostats open without requesting heat for a back boiler stove
I have a back boiler stove that heats my radiators and hot water when we use it. - in addition to our burner Every time I do this, I have to unplug all the TRVs manually. My friends laugh at me because of this. Why is there not a mode to open the valves without requesting heat? This would also help with bleeding radiators…
-
Notification when the device triggers the heating to turn on
In the past the heating has been turned on even though it has not been manually activated and the scheduled times have not been triggered. Obviously when no one is in the house this becomes a major issue, particularly with the rising cost of fuel. Can you develop a notification that an email or app notification is sent…
-
Limit user access / privileges
We have family members who visit our house when we're away sometimes. We've added them (their phones) as Tado users so that the geofencing detects when they're here. Some of them have a temptation to change the settings which I don't then notice for a while. Is there a way to limit other users' ability to change the…