-
First TRV casualty
Been using the Tado TRV thermostat radiator valve to control the TRV for about 5 years now. At the time of using this setup I did have a concerned about wearing out the TRV valve components. The TRV valve is now causing the radiator to rattles when it is closing and opening. Sometimes it rattles when it is open. The TRV…
-
Smart Thermostat and smart TRV in the same room... no longer calling for heat
Hi all, I have a fairly simple heating setup. A Bunglow with just one heating circuit. I've recently installed Tado and all is great... except the "lounge" room. In the Lounge I have one radiator with a Tado smart TRV and the smart thermostat. originally when I just had the TRV set as "lounge" it worked as supposed to. it…
-
I have bought 5 and 3 isn’t working!!!
I have I. Total of 5 thermostat and from those 5 , 3 is not working. Worked on the beginning but right after installing 3 is non-functional. Changed batteries a couple of times but still not working. I’m running out of patients trying to make them work and I’ve already asked last week but still haven’t gotten any response.…
-
temperature offset
After adjusting the temp offset, nothing changed in the system operating settings. What is the point to make those inputs if there is no change?
-
Vaillant ecoTEC Pro 29
I'm having a Vaillant ecoTEC Pro 28 combi boiler fitted at the end of November. I've just looked at the Tado instructions for connecting the extension kit to the boiler. All the instructions say to do is connect the BUS + and - terminals to the corresponding terminals on the Tado extension box: Is this all? Two wires to…
-
How do I turn on the downstairs radiators?
Upstairs radiators are working on the time settings but not the downstairs. Just moved in and haven't a clue 🙃
-
Zoning
Hi peeps, I have a combi boiler that has no hot water tank and no external thermostat or programmer/controller, currently. I ordered the EU version of the wireless starter kit so that I can use the OpenTherm protocol and plan on installing the Tado Smart TRV’s on all rads. In Ireland, there is a government grant for…
-
Temperature offset not working
Hi, for some reason when I go to calibrate the room temperatures using the offset function, the temperature shown on that screen does not correspond to the Home Screen.. it’s Along way out just in one room? Then when I change it to the correct temperature again, it either shows a much higher temperature if I adjust up… or…
-
Smart radiator thermostats
Hi, can anyone tell me if I can add smart radiator thermostats from other manufacturers to Tado please?
-
Early start - how long to 'learn'?
Hi, we have a new tado system and so far it has been a nightmare; installing it was largely guess work as I didn't get the email instructions that were promised, I've run into the 10 limit of TRVs controlling the boiler (which is not specified when you buy them) and now the early start is possessed, we've had to turn it…
-
Does Smart AC actually change fan speed to bring the temp down quickler in Thermostatic mode?
Hi there, It is starting to get much hotter in my part of the world and today I noticed that no matter what temperature I set the target to in thermostatic mode, the airspeed of the AC unit stayed the same. You can see from the attached photo that the target temp was 23c but the actual temp was 29.1 yet the aircon was…
-
TRV's to fix my challenge
Hello everyone, I am living into a semi detached house and my current setup included two nest thermostats. One on the ground floor and one upstairs. The problem is that during the refurbishment, we did not install a radiator on the upstairs landing (Where one of the nest thermostats is currently installed). the result is…
-
Dual Router Connection
I have just acquired a new dual frequency router which appears to have no way of separating the frequencies as 2.4 of 5.0GHz. I know Tado requires a 2.4 frequency to work but if I can’t split them will it still be able to work? Thanks for any help
-
Unable to Add Device and Extension Kit Blinking 4 Times
Hello, I recently moved into a house which already had a Tado system installed. When we moved in we quickly realised that the internet bridge was missing so we could not get the system to work properly. We have since bought a replacement internet bridge so that issue is resolved. HOWEVER... I've tried to set up the system…
-
Tado heating up while in away mode?
Hey, I've been using Tado only for two days and got a small question. I have a Tado V3+ radiator thermostat and an active premium membership. I made a schedule that turns the radiator off overnight and switches to 15°C in the morning at 7am. I set it to heat my workroom to 21°C from 1:30pm to 5pm. I did set all time blocks…
-
Hot water temperature
Hi we have solar ev hot water - so it would be nice to have a tado wireless temperature sensor to allow us to monitor hot water temperatures at the tank At the moment all we can do is turn the hot water on or off. If we could see current temps then we could make more efficient decisions for hot water production
-
Humming Pump
I installed a v3 wireless receiver today in place of my Honeywell and followed the instructions on the app. It then said it looks like I might have a gravity fed system and I may need a driver. I have looked and believe I have a Y-Plan fully pumped system so didn’t bother with the driver. The heating works perfect but I am…
-
I can't register a device on the app or website.
I've scanned the QR code and put the details in manually but it just says 'something went wrong'!!!!
-
EE bridge issue all over again, this time with City Fibre?
My bridge stopped connecting to the Internet in the early hours of March 1st. This coincides with a planned update to the City Fibre network and seems to be a repoeat of this now resolved issue with EE. My system has not worked since and I now have been waiting two days for a reply on the chat support service. This is…
-
Offset broken
So the temp offset doesn’t work in iOS. It has no bearing on the reported temp on the app or via the thermostat Seems like a long running issue. Do any of these reports ever get actioned or am I ripping this stuff out? Seems like there isn’t a lot of feedback on here which isn’t great.
-
Temperature offset not shown in app
I have a number of offsets on my smart valves to compensate for the actual room temperature compared to the sensed temperature. It varies between half and two degrees. However, I have noticed recently that the temperature display in the app shows the factory temperature not the offset temperature. When you go back into the…
-
UFH - Replacing wired with wireless thermostats
Hi, I am looking into installing Tado throughout my home. I have a combo boiler and heating is both radiators and multi zone UFH. The radiators are straightforward (hub and radiator valves) However, I wish to replace my wired thermostats. I have 4 zones & thermostats - through a Danfloss 088H001701 wiring centre that…
-
Smart thermostat won’t switch on after changing battery
Hi All. I changed the AAA batteries on my Tado thermostat but it won’t switch on. This is the first time I change the batteries. I think it might be because it was still wired to the boiler . Any ideas on what I do now ?
-
Old Honey well wiring
I have an old Honeywell thermostat but there seems to be no letters to follow what the app tell me. Any suggestions? I’ve contacted Tado but have no idea if they will ever contact me back. Does anyone have any ideas?
-
Tado with Radiators and underfloor heating
Hi. I wonder if someone could help me to make the right decision please. We have a new underfloor system in an open space Livingroom / Kitchen in a L-shape. The builder put 2 zones in the kitchen are ( one end of the imaginable L-shape ), one zone in the middle where the main Livingroom area is and one zone at the other…
-
Bulex eBus temperature too low, heating room slow
Yesterday I installed a wireless tado thermostat paired with thermostatic valves on each of my radiators (12 in total). The boiler is a Bulex and it's connected via eBus. The mode is set to D07. Before tado, when using the thermostat of Bulex itself, if it was 20c in the room and we set it to 21c, the boiler would turn on…
-
Two heating zones plus water - please guide me. (UK)
Hi, I’ve already installed 9 Tado radiator thermostats (5 more to do), but need guidance as I’m going to replace a 25 year old system boiler with a modern one. What should I do? Q1) If I replace my two wired zone thermostats with Tado wired thermostats and install a Tado wireless receiver (aka ‘Programmer with Hot Water…
-
Not functioning
Change the battery on 3 thermostat and all 3 keeps on loosing signal!! Kept resetting but still not turning on.
-
Replacing existing wireless thermostat
Good Morning I'm looking at replacing my current wireless thermostat Salus RXRT505 with this Tado V3+ Black Edition Wireless Heating & Hot Water Smart Thermostat Starter Kit | Wireless Thermostats | Screwfix.com my boiler is a Baisi Riva Advanced HE. Would this be a simple enough swap? I'm slightly confused by Hot water…
-
Does anyone know how to give a second user control?
I can't see how to give access to schedule for TRVs in app. Has anyone managed this? thanks