-
Valve heads within wooden cabinets
This is a bit of technical/sales question. Forgive me if it's not in the correct part of the forum. I would like to install several Tado valve heads in my house. I plan to change the existing aged TRV's with Danfoss valves. I have several rads without TRV's. Several of these rads are within decorative wooden cabinets.…
-
No offset temp in app?
Where’s the offset temperature gone in the app (iPhone)? It’s really useful and a step backwards if It’s disappeared. Any resolutions for this issue?
-
Tado Internet Bridge - Cloud LED keeps blinking
Hello There, I have bought the Tado V3+ starter kit with a lot of excitement but my excitement keeps fading day by day because of lack of support from Tado. I'm an 1st time user of Tado, when trying to connect the Tado Internet bridge (V3+), the Cloud LED keeps blinking and unable to connect to internet. I have tried all…
-
RAVL adaptor too big when mounted
So I have installed my thermostats on a number of my radiators. A few of them, however, are causing me grief. The valve simply seems to big for the adaptor, making the adaptor itself too big for the thermostat. I have turned the adaptor until it clicks into the notches. Questions: 1) What is the inner diameter of the metal…
-
Combi boiler wiring: Multiple radiators in 1 room
Apologies this maybe a silly set of questions. I have searched and couldn’t find an answer to the below I have a wiring question on radiator plumbing. I have multiple radiators in a room, I imagine/believe they are connected in series not dissimilar to this wiring diagram here…
-
Maximum temperature
Is it possible to adjust the maximum boost temperature on the thermostat? Also is it possible to get notification on the app whenever the thermostat is boosted manually? Thank you Mamas
-
Batteries are running low quickly
Hi, I’ve got 2 Tado Smart Radiator Thermostats installed for about 2/3 months now. One of the radiator thermostats gave a low battery e-mail on Tuesday, I’ve changed the batteries with new LR06 batteries and now today I’ve got an new notification saying the batteries are empty again… The other radiator thermostat is still…
-
Opentherm
Hello, I've just had a 111w Viessman boiler installed. It has opentherm and needs a heating and hot water input. I currently have it on a Nest v3, but I'm thinking of going to Tado because of the TRV's being able to 'heat on demand'. This morning I've read that UK Tado no longer supports Opentherm and the EU doesn't have…
-
Install replacing Switchmaster 9001. Did I do this right?
Also hopefully a reference for others. Older system with a water tank and boiler. 1 old style thermostat and a Switchmaster 9001 scheduler. I bought the wireless pack, so for the thermostat, I connected the black and red wires and secured the ground separately. Found this on a forum for the wiring on the current controller…
-
How do you switch off heating into frost protection
In the old Android app you had a switch to turn on permanent frost protection. The new interface does not seem to have such a switch. Any idea how to do this?
-
Boiler won’t switch on for central heating
Set my system up to use with a greenstar cdi 30. Hot water comes on with the timer but the heating won’t come on. Any suggestions?
-
New Build Dual Zone Installation
Hi everyone, I currently live in a new build with two heating zones, with wired thermostats in place. The combi boiler is in the garage with what appears to be two seperate valves for the the two zones (switch on the bottom for Auto and something else, I think always open?) I blindly went out and bought 2 wireless starter…
-
A couple of noob questions
Am I better having Smart TRV's in every room? Some room have 2 rads. Also my Main Thermostat am I better having a Smart TRV in the same room? Sorry if its basic question but new to the system
-
Connect Tado Extension Kit to Thermomotor
Hi, I would like to setup an Tado extension kit to a Roth termomotor (which is not officially supported by Tado) The Roth thermomotor is a simple on/off device that expand/shrink when a 24v (1w) signal is on/off. As far as I can read from the manuals, I have to use the low voltage relay interfaces: A and + in a potential…
-
E-mail with notification
Hi Got an email this morning that I need to change batteries in one of my thermostats. Part of the email reads: “ Don’t worry if you can’t change the batteries immediately. When your Smart Radiator Thermostat does not have enough charge to function, it will automatically close the radiator’s valve and the heating will…
-
TRV
I have just installed a complete system. When I tried to heat only one room all the radiators came on. Any suggestions as to what I might have done wrong?
-
Radiator valve body tip and high battery usage.
After the summer shutdown I would remove the Tado head and clean the tip of the spindle that is pushed up and down by the Tado head. Clean it of any dirt and debris and use a spot of silicone grease to ensure it moves freely by using a flat head screwdriver to press on the tip it, will make sure it’s easy for the Tado to…
-
Can I use the wireless thermostat out of a V3+ starter kit on an existing installed tado V3+ kit
:) Can I use the wireless thermostat out of a V3+ starter kit on an existing installed tado V3+ kit
-
Help with installation
Installed a wireless smart starter kit v3+. All hooked up fine. But as soon as boiler started up again, it tripped. I checked everything, re set the fuse box and it isn't tripping anymore but no power coming through to the tado receiver or boiler. It is a boiler with a separate unvented hot water tank upstairs. Help! Now…
-
Hot Water intermittent
Hi all I’ve inherited a tado system and am really struggling with some basics. There is a receiver, bridge, wireless thermostat and one radiator control. The rest of the house is on TRVs. I’ve not really had to explore heating yet but it seems I can get this firing up via the thermostat. However, hot water is a different…
-
Disaster! Warning to others
Following a thumbs-up on compatibility from Tado support via email I purchased a Vaillant ecoTEC plus 637 System Boiler (Tado confirmed the boiler is compatible and would communicate via the bus), along with a Vaillant Unistore cylinder. Subsequently (and now with boiler in situ), via phone today, Tado told me this system…
-
Smart thermostat reverts to schedule even when off
Hi there, I have a Smart Thermostat which has a bunch of schedules programmed via the app. However, I've set Manual Control to Off and 'Active until ended by a user'. Every few days, I realise my heating is on, and checking the app, this manual control is cancelled and it's back to the previous schedule. Nobody else has…
-
New Tado Wired Smart Thermostat - Worcester boiler won't turn off
I purchased the Wired Smart Thermostat Starter Kit. I have removed the existing WR1 wireless receiver, and connected the black and grey wires to the thermostat - COM and NO. It is a worcester greenstar 30si combi boiler. When I adjust the temperature on the app, I can see that this adjusts on the thermostat. However, the…
-
Bridge Extender
I’ve read numerous discussions regarding a bridge extender and the continuous drop-outs of devices, but as of yet I haven’t seen a solution. Does anyone have any recommendations over and above Tado’s guidance on this? Thanks for any responses
-
Are Tado making a RTL Smart thermostat?
Hi Are Tado working on a RTL return valve thermostat? Or are their any way of getting Tado smart thermostats to work with hydronic underfloor heating? Many houses in Denmark has this type of heating, and the old installations where made with RTL valves, which is still the cases for some new builds as well, if it´s for a…
-
Help! how to wire the wireless Tado V3+ to a Daikin D2CND024A 24kw condensing boiler unit
Hello! I would like some information on how to connect a Tado Smart Thermostat - Wireless Smart Thermostat V3+ to the Daikin D2CND024A 24kw condensing unit Some images of the terminals where they connect, or a video, would be useful. Unfortunately, there are not many videos or information about this. On my wiring diagram…
-
Individual user & room geofencing
This has been on your roadmap for over 4yrs. When can we expect it please
-
Cost per kwh
The price per kwh on the energy IQ widget differs by my tariff price set in the app by quite a bit. Is this correct?
-
Help with changing wiring of existing tado installation
Hi, I've been a tado user for many years and have been very happy with it. My initial setup was as follows: Glow worm Flexicom 30sx boiler Horstmann H37XL controller 3 x wired mechanical room thermostats, split over 2 heating zones (1 in 1 zone, 2 in another) Hot Water I now have: 3 x Tado wired thermostats Extension kit 5…
-
Replacing NEST thermostat with TADO thermostat
Today I have a NEST thermostat and all my radiators are equiped with TADO radiator valves. I know, not a great match. I'm about to replace therefore my NEST thermostat with a TADO thermostat Question: will this solve my current problem. Example: NEST Thermostat is in the living room. Livingroomtemperature is 21degrees and…