-
Introduce a learning ability to Early Start for radiators
Using the data a thermostat picks up about how your house heats and cools, and the time taken to reach/maintain a temperature introduce custom smart start/finish to scheduled events . At least add a 'radiator' version of Early Start.
-
Allow changing temperature if one device in a group of two or more loses connectivity
I initially reported this as a bug to online support, then they told me it works by design and should bring it up here instead. Which doesn't make sense to me but still, they didn't leave me with any options. It appears that if one device in a group is offline, you can't control any of the remaining ones through the UI.…
-
Air Source Heat Pumps
I have just replaced my Tado controlled gas boiler with a Mitsubishi Air Source Heat Pump. I emailed Tado and enquired if they had any experience in using Tado in conjunction with such a device. The reply came back that I should put my enquiry here. Perhaps Christmas has come early! It doesn't seem the logical place to me…
-
Add new "Consumption" menu to web interface
Hello there, Please add new "Energy IQ" Consumption menu to web interface. It only available on the app (i dont know, why...) It more comfortable that see it in web interface
-
[Feature Request] Notify when room temperature drops below set room temperature
I have noticed few times that heating won’t start when water pressure is the boiler is low, it will be useful to know that there is an issue with heating and not wait for couples of hours to realise it.
-
Copy Paste within room
The new copy-paste option is nice however still missing to do it within a room as for example Monday has same as Wednesday and Friday while other days have differen ones
-
Allow changing Hot Water “OFF” temperature
Currently, when hot water is “OFF”, the temperature sent to the boiler for hot water is 55 degrees Celsius. This temperature can not be changed on my boiler because the Smart Thermostat overrides it. I want to have periods in my schedule where hot water is “OFF” (so the boiler is not pre-heating water all the time), but…
-
Do not report a room when it's not assigned to a Zone Controller
Hi team, I've defined a room with a smart TRV which I want to only open and close the valve but does not actually call for heating so I assigned the 'Zone Controller' to 'Not Assigned'. This works perfectly but the problem is this is reported in heating activity and Care & Protect which is actually wrong, since the room is…
-
WIFI 6 Mesh Wifi or Thread IPv6 to solve range issues
Those with large houses or thick stone walls, will have undoubtedly come across range issues with Tado. They are also increasingly likely to have resolved these issues with mesh WIFI or powerline WIFI adaptors. WIFI 6 routers are not yet commonplace, but offer a low energy solution for TRVs and thermostats. Similarly…
-
Support boilers with no ability for different levels of heating better
My boiler, like many others, does not support different levels of heating - just on or off. I find it really annoying that my app says 1 flame or “heating to 20.8c” and colours the graph area in when it isn’t actually heating my house. Additionally this makes the stats on how long the heating has been running during the…
-
Smart Assistant - notifying of temperature not raising as expected
It's more a feature improvement than an actual problem: I've started heating season last week and left the home for few days. The smart valves have been open all the time but temperature was not growing due to malfunction of the heating circulation pump. I've fixed it (it got blocked after summer season not being used) -…
-
RESTORE DECIMAL PRECISIO
RESTORE DECIMAL PRECISION. IT'S A CORE FEATURE! IT WAS A STUPID IDEA TO BREAK A CORE FUNCTIONALITY TO SOLVE A UI PROBLEM WITH THE CURSOR
-
Room specific 1h boost button
Boost button in the room tiles in the overview screen. Useful when you prepare the kids for bath or bed. I have 7 rooms/zones spread over 2 floors and I don't want to boost all the rooms.
-
Airco and heating syncronisation
It would be great if Tado airco and standard Tado heating controls could synchronise in the same room so that heating doesn’t try to heat when airco is cooling. This seems like an obvious feature, but apparently they are two totally different systems in the app. This is a shame as in many cases in Europe the heating is…
-
Open window detection only when heating and without Auto-Assist
First: The automatic suspension is a really efficient tool, but I absolutely don't see any reason why we should pay for it? As I don't have auto-assist I receive a push notification whenever an open window is detected. The effort for tado of disabling the heating in the room for 15 minutes is lower than the effort of…
-
Humidity correction
Discovered a function to set the room temperature correction and would like to have a function to set the a correction for the humidity
-
Upcoming rework of the tado° community forum; what would you like to see changed?
At tado° we are planning to rework the community forum. We plan on being more involved, giving more feedback to you. In return we are also very interested in your feedback about our products, recent updates/releases and upcoming updates/releases. We plan on doing more than just spend more hours in the forum; we want it to…
-
Adjust temperature or Boost Heating feature
Boost Heating is useful but the default 25C value is, in my opinion, too high. I would like to be able to change this, eg. To 22C.
-
Bypass feature
Hi all, I am a happy tado user since a few months and realized that we needed to install a by-pass in our cv system. Now I am wondering why tado does not offer the feature to mark one of your smart thermostats as the by-pass radiator. So this thermostat will never close fully, so that the pump of the CV (boiler) is…
-
Stop account leakage from the community
Currently it is possible to retrieve intelligence on the existence of community accounts by entering e-mail-addresses at login. This is especially bad, because many might be using the same e-mail for their personal tado account. This is highly advised against by several security guidelines, including NIST and ISO.
-
Smart AC & Smart Thermostat/Radiator integration
Hey, I am using Thermostat and Smart Radiator since my house has central heating, but for cooling reasons I need to install two AC's LG Split, more to cool than heating because I already have a central heating system. I am thinking of adding Smart AC Control to my Tado System so that I can integrate everyone on the same…
-
More rooms for extension kits
Tried to add a room to extension kit but limit is 10 rooms I cannot have more than 1 extension kit so I am restricted to a maximum 10 rooms can the limit on amount of rooms be increased for extension kit?
-
Make Quick Actions more specific
I like the idea of the Quick Actions although the boost action would be much better and more useful if it were to be applied only to the rooms that are actively heating in the schedule at the time the boost is applied. I don’t want to be boosting the whole house when I’m only using the lounge or downstairs. Can this be…
-
Notification when heat is turned back on automaticly
Hi. There is the feature where you'll get a notification if there's an open window and then you can click the "turn of heat", the heat stays of for a period of time and then on. My request is a feature that makes it possible to get a notification when the heat then turns on again - so that I know to close windows/the heat…
-
Support for multiple people and multiple zones
With current geofencing, if all devices are away from home all zones are set to away. If at least one device is at home, all zones are set to home. Ideally, this should be more granular. As an example: We have two devices, mine and my partners. We have four zones: my study, my partner's study, a shared bedroom and a shared…
-
Need a meter for hours heating was on
Living in a block of 8 flats, we all tap on central petrol heating. We get charged by the hours we have heating on. No information In the daily room graph (have only one thermostat) there is no indication of the time heating was actually on, from start of month / from start of day till present. Is something so obviously…
-
Changing the maximum flow temperature myself
Initial problem: Hello, i have a Ferroli Bluehelix PRO 32C heating central. I use tado for 3 years now. After last update of Tado APP to version 6.0.2 (9826) i found following bug. I limit maximum temperature of heating using heating buttons on my boiler to 55C. After this update, maximum flow temperature is reseting…
-
VA03 Smart Radiator Thermostats support a charging port?
Will the next version of smart radiator thermostats include charging ports? Will make life a lot easier. I'm stuck with VA01's. Unless there is an introductory offer that I can't refuse I doubt if I'll change them. If I did I'd die happier if they had charging ports 😕⚰️😌
-
Open or close valve without controlling heating system
It would be nice if we could control the valve full open or fully closed without start/stop heating system. Example, i need a radiator always opened because of the pressure system and dont want it to control the heating system, just let the current water flow in.
-
New idea: respond to valid user suggestions?
Hey tado development team, being an owner of a software agency myself, it's a huge red flag to me when I see rather trivial user requests and improvements just sitting there for five years (!!!) without an official response. Some guy named "Frank" answered who seemed like a tado rep, but his account is deleted now.…