-
Service Mode for Boiler Maintenance, Draining and Power Flushing
Hello, It would be important to have a Service Mode setting, where: all radiator thermostat valves are fully open and in manual mode: can be individually set to fully open or fully closed boiler control is set to off and in fully manual mode: on or off any timers and automatic "return to schedule" are disabled This is…
-
Allow display of ambient temp always on by an optional setting
The display looks great, unfortunately my previous thermostat used to display the ambient temp which was really handy. Would be great to display it all the time or on a schedule—yes I realise this will affect battery life but users should be able to choose the trade off.
-
Provide estimated gas consumption from the boiler
Where possible and depending on the boiler model, would very useful to get an estimate on gas usage if the boiler can provide such.
-
[Released] 0.5° Temperature step for SRTs
tado° is excited to present our 0.5°C temperature “Step size” changes for our Smart Radiator Thermostats. Many of you who appreciate our products have asked for a 0.5°C temperature change feature and we are glad to introduce the 0.5°temperature granularity and reiterate our commitment to your satisfaction. You can now set…
-
Bug in the way heating activity is calculated
According to Tado's app my heating system has been on for 20h per day on average during the last month, and 24 full hours the day before yesterday. In reality my boiler has been on for only about 10 minutes the day before yesterday, and the same goes for the rest of the month. The reason for this funny discrepancy becomes…
-
Merge "deleted rooms" with a new room created
I have deleted a room and re-configured again due to malfunctioning radiator thermostat. Now in my "heating activity" dashboard it shows the history of this room in "deleted rooms". Is there any ways to merge this deleted room to the new one I've created so the statistics aren't disturbed?
-
Apple Watch & Mac app
Would love to see the app extended to the watch and Mac app store please
-
[Device] provide main error code detection (and alerts) for Bosch/BUDERUS EMS-BUS
I have a Buderus logamax plus gb162-35 v3 boiler with RC300 module. The boiler communicates with the EMS-BUS (Bosh & Buderus) which equips many boilers and customers. If the boiler loses pressure, Tado does not detect it and does not warn me. I would like to point out that I have to deal with the loss of pressure with my…
-
Support for multi-zone UFH manifolds
The current integration with underfloor systems appears to be limited to single zone systems without zone actuators. A lot of UFH system are UFH downstairs with radiators upstairs. The UFH system typically have more than one zone with actuators per zone and a shared pump. Currently, I can get a multi-zone UFH management…
-
Calibrate radiators with room thermostat
I have 5 rooms setup with smart radiator thermostats but only need one wireless thermostat for my main living area. It would be great it I could calibrate my other rooms by placing the room thermostat in each room for ‘x’ amount of time to automatically set the temperature offset.
-
A link to new feature releases
Could you add an Updates link where you can see all the recent and previous feature updates you’ve made. Use case: I just opened up the app and saw the ‘child lock’ feature you added, but stupidly, I hit ‘skip’ and now can’t find an (easy) way of finding it again.
-
Push notify users when there is evidence that the boiler/heat source isnt doing its job
It is a common problem for oil fired boilers, particularly those over 10 years old, to be heavily affected by wind speeds near the air intake. A sudden rise in windspeed, occuring within 1 meter of the air intake can cause the boiler's air mass sensor to misread the temperature and volume of air incoming and force the…
-
Individual Room Boost Request
Hey, Would it be possible to implement a solution, where heating for an individual room only could be boosted? Currently, this is missing from the app, as you can only hit a button to boost all rooms at once and then you have to untick the ones that you are not interested in. Which is a bit cumbersome. The only tweak I…
-
Rename Zone Controllers / Wireless Receivers
We should have the ability to rename the wireless receivers and give them proper zone names. I have 3 wireless receivers on my boiler for 3 floors in my house. When I add a new temp sensor or radiator TRV, I should be able to add it to 'downstairs' or 'basement' or 'upstairs'. Not to PR123456789! I installed all three…
-
Energy IQ - Better process for when energy meter is replaced
I recently had to have our smart gas meter replaced, because the existing one became faulty. This meant that my meter reading dropped back to zero when the meter was replaced. When I came to enter a meter reading in Energy IQ, it said I could not enter a number lower than the previous reading. I contacted support, they…
-
Worcester Bosch EMS2
It appears Tado is able to work with older Worcester Bosch Boilers with HT-EMS. Possibly some others Bosch ones with EMS+ ? It will also work on Relay (R01), On/Off Mode, but this will NOT modulate the boiler. All new boiler installations in the uk have to confirm to EnergyPlus Regulations. This means having some of…
-
Stabilizing heat demand pattern for constant set temperature
I live in Scandinavia and often work from home, so I have a consistent heating demand throughout the day. When looking at the temperature/heating graph view, it is clear that the heating demand (and temperature) follows a cyclic pattern with a period of 45min on average. I'd love to post an image but I don't think this…
-
Schedule a boost
I am often away from home. My underfloor heating has a 24 hour thermal lag from 6 degrees to 22 degrees. I regularly forget to preheat it. Can you please add a facility to diarise a temperature boost for one or more rooms?
-
Bespoke Nom Circular Geofence
Allow a non circular Geofence to be plotted. We have a park near our house that would be good to have outside the geo fence, especially when the wife and kids spend a few hours there. If I reduce the current Geofence radius to exclude the park the Tado App says it's too small.
-
Different schedules in X equipment like in the V series
Is there a possibility to have the same configuration related to the schedules like in the V series? Depending on the days: M to F and WE All the days Everyday
-
Consumption graphs: add option to scale the graph from 0
It would be great if there was an option to make the vertical axis of the consumption graphs scale from zero, instead of showing them as a "zoomed in" scale e.g. between 14°C and 22°C or whatever. It's clearer to see patterns and the peaks/troughs are less exaggerated from 0. It's also impossible to compare graphs over…
-
Open Window Detection Accuracy
Hello, I have recently bought tado x and was disappointed by the open window detection. There should be a manual button to say that the window is opened it shouldn't rely only on fixed changes of Humidity and Temperature ( Some spaces takes more time to lower the humidity and doesn't detect the window is opened) when…
-
Internet Bridge local API
It’d be great if it were possible to interact with the Internet Bridge using a local API so that requests don’t need to be made via the internet. Presumably there’s some kind of http server on the device as HomeKit is able to communicate with it locally?
-
Always on display option
Hi just installed my wired v3+ very easy instal and instantly impressed. One suggestion would be to have the option to keep the temp display always on so you don't have to press everytime to view current temp.
-
Diffret status for thermostats that are not linked to a zone
In order to stop a room calling for heat and switching on the boiler (like a toilet, closet etc) you can remove the zone controller for the room. It would be good to acknoladge this on the tile in the app.. currently regardless of the zone set for the room it will say "heating to" i think the rooms that are assigned a zone…
-
The Tado is not Smart Enough
I worked on heating systems before the Internet. Commercial Heating systems used Optimisers. They were quite complex in operation and learned over time. But the controls were simple. It had an outside temperature sensor and an internal temperature sensor as a minimum. You programmed in occupancy times. If the outside…
-
Battery Monitor Improvements
As a suggestion, there needs to be better battery level monitoring\reporting between the Tado application and devices. I have noticed in recent weeks that devices are reporting battery levels as "Good" but then are malfunctioning due to suspected low battery life, which is then confirmed when you re-insert the batteries…
-
Personalised Boost heating
Is there any chance to personalise the boost heating option? Option to program time and temperature for the "Boost heating" would be useful feature
-
New idea: respond to valid user suggestions?
Hey tado development team, being an owner of a software agency myself, it's a huge red flag to me when I see rather trivial user requests and improvements just sitting there for five years (!!!) without an official response. Some guy named "Frank" answered who seemed like a tado rep, but his account is deleted now.…
-
Room heat indicators in house overview.
Hi Tado. Can we get the 3 little heat indicator line on all the room tabs in the home overview. It really annoying to have to go in to the room to see if this room is heating or not at that moment.