-
Timed Boost Function with a physical button
Hi All, would it be possible with a firmware update to setup the button on the thermostat to act as a boost button also. Its more for the older generation who find navigating mobile phones a pain. I have been looking into using a smart switch and IFTTT to try and mimic this boost function but can not. Although I have got a…
-
Different colour radiator thermostats
We have raw metal radiators and the white radiator thermostat valves look out of place - I may try painting them but think would be a nice idea if Tado offered black and grey etc… as opposed to just white?
-
Quiet fan mode - AC units
Using the setup guide, and referencing the model of Mitsubishi Electric AC units that I have, it supported a lot of the modes that are possible. One omission that I would like to have added is the "quiet fan mode". We have a unit in the bedroom that we use every night and with the IR remote that came with the unit you can…
-
Apple Watch App
I've got quite a large Tado heating system installed on everything in my home. I've just got an Apple Watch. I get the notification when I leave home on the watch. However, I can't switch to away mode from the watch. This would be very useful (and also to be able to switch back to home mode). You definitely need to write…
-
Tado app for Apple Watch or other watch
It’ll be cool, we had an app for the watch for using on Apple Watch or other Stead of using the HomeKit it will be better than he had an app for the watch is the same way as the iPhone and iPad Don’t want to use HomeKit Can you make one please?
-
Cooling for underfloor water systems
I have "centralized" machine for deliver heating or cooling (according to what it is configured by building manager). I am asking to include some kind of software switch to change between winter and summer mode, just to be able to manage cooling underfloor water system (set 25ºC temperature as a target and achieve it while…
-
Add imperial units to measurement options in EnergyIQ
Older style meters (pre-smart meters) still provide meter readings in imperial units - cubic feet. This means customers without smart meters cannot use the EnergyIQ, because it only allows you to add meter readings in cubic meters (new style meters).
-
Duration for manual control through thermostat
I would like to set, using the app, the duration of the manual temperature control activated through a thermostat. I would like to choose between until you cancel until you resume schedule until the next time block Right now, there is no choice and "until you cancel" is the only behaviour.
-
Responsive User Interface
The User Interface should be responsive to ensure it renders correctly on all screen sizes maximising the resolution to ensure the best possible usability. When programming complex schedules it's much easier to use the web interface on a PC or Mac where you should have the benefit of a large screen showing the full smart…
-
Wireless Receiver - status and history in application
I would welcome to see actual status (on/off) of Wireless receiver and chart with history in the application and web.
-
Temporary off with timer
The current whole-house on/off feature is manually off, then manually on. It would be helpful to set a timer, so that we can turn the whole system off for a certain amount of time only.
-
Show the flame icon on the Tado thermostat display when the boiler is running
Very useful to have at a glance if the boiler is running without having access to the boiler display. This is standard in almost all the thermostats.
-
Scheduled "Call for heat"
atm we have the option to enable or disable a zone controller, and this stops the room calling for heat from the boiler. But, I think due to the cost of living crisis around the world atm, it would be a good option if Tado˚ could move this option to the Scheduling screen. My idea would be for each time block in the…
-
Feature to turn off LEDs Internet Bridge
I like to have the availability to turn off the LEDs Internet Bridge.
-
Entering your Energy IQ tariff with pence not pounds
Recording tariffs in the UK would be much more accurate if the app allowed pence/kWh rather than pounds/kWh???
-
Internet bridge improvements
Any chance you could add the ability to use two different internet bridges on the same account as I can only position mine at one side of my house or the other and it occasionally leads to loss of signal at some of my thermostats. Either that or create a new internet bridge with a stronger signal so that it reaches farther…
-
Add 'Cubic Feet' to Measurement Units
I have figured out the main reason why the EnergyIQ does not work for UK users without a smart meter - the older style gas meters are imperial units, and the readings are in cubic feet, not cubic meters. Are you able to add this as a measurement unit on the app alongside cubic meters and kWh?
-
EnergyIQ - Display volume-based monthly forecast
In my opinion, a volume-based metric is more suitable because it is a consistent metric. Volume indication is not subject to change when energy prices/ contracts/ taxes change. Therefore, I suggest showing it alongside the "expected monthly heating cost". Or even better - change it along with the [€ | m3] toggle next to…
-
Combineren van (actieve) Tado Smart Thermostaat en (passieve) Ventilatieroosters
Ben erg happy met Tado Thermostaat en Smart Radiatorknoppen. Ik vroeg met af of het nuttig zou zijn om ook de ventilatieroosters op ramen en deuren automatisch open en dicht te schuiven. Bijvoorbeeld als radiator op uit dan ventilatie rooster automatisch open, en als radiator aan het ventilatierooster dicht tenzij bepaalde…
-
ZAPIER integration ?
Hello. Does anybody know if TADO will be allowing ZAPIER integration ? This would obviously allow TADO to be controlled by many devices on ZAPIERS list and also allow many scenarios to be played out.
-
Gestione di più abitazioni con la stessa APP tado°
Mi è stato chiesto dal servizio clienti di tado° di postare la mia richiesta tecnica in questo forum, visto un mio problema irrisolto. Sarebbe utile (almeno per me) poter gestire con la stessa APP tado° più abitazioni cosa oggi possibile soltanto creando un nuovo utente e gestendo una abitazione con la APP e l’altra da…
-
In App Firmware Update Notification
It would be good if there was something in the App to suggest a firmware update is being performed on a Tado device. Just spent 30 minutes troubleshooting why all my SRT's were reporting 'No Remote Access' and were not communicating with the Extension Kit. After rebooting the Extension Kit & Internet Bridge it turned out…
-
SET to a VALUE (MIN or MAX)
Hi, One important feature is missing on the app. All the settings are related to the temperature measured by device. There is no selection for "FULL OPEN" or "FULL CLOSE" what sometimes we need to. I have Vaillant Boiler with Vaillant eRelax Room Termostat. While i'm using it together with tado on my all radiators, there…
-
Programmation "simple"
Bonjour Serait-il possible, plutôt que d'utiliser votre programmation intelligente qui est une véritable "usine à gaz" a programmer de pouvoir simplement démarrer et arrêter a une heure dite tout simplement !! Début à: , Fin à:, Froid ou Chaud, Température et c'est tout ! Merci d'un retour PS J'ai eu plusieurs échanges…
-
Provide configurable option for TRV to be a zone controller
I have noticed that in Energy IQ certain rooms consume more energy than others with Bathrooms, and Kitchen being higher on the list. Although these rooms are smaller, it is clear that the temp drops quicker due to ventilation and extractor fans. As such these TRV's switch on and call for heat at times that the boiler would…
-
Add new "Consumption" menu to web interface
Hello there, Please add new "Energy IQ" Consumption menu to web interface. It only available on the app (i dont know, why...) It more comfortable that see it in web interface
-
[Feature Request] Notify when room temperature drops below set room temperature
I have noticed few times that heating won’t start when water pressure is the boiler is low, it will be useful to know that there is an issue with heating and not wait for couples of hours to realise it.
-
Return to schedule in Alexa
Through Alexa routines I can use my Hue remote to turn up the heating in the room when I turn the light on which is great. But the only option is to turn the heating off or to a set temperature when I turn the light off. Would be useful if one of the options was return to schedule.
-
Percentuale della batteria
Buongiorno, all’interno dell’app è presente l’indicatore della batteria che, al momento, riporta perennemente 100% anche se il reale livello è più basso se non al limite, di li a poco si potrebbe ricevere la mail di batteria quasi scarica. Detto questo, è ipotizzabile implementare il corretto livello in percentuale della…
-
Scenes & Controller
I have just installed Tado with 2 zones and 20 radiator units, very happy with the results, my house feels much more even in heat and now I can turn on the floors separately. I would love a wall mounted dedicated LED touch screen panel that ran the app, showing you the entire house control, using the app is great but it…