-
Thermostat should measure humidity in a way that is not useless
Hi, I’ve been using my smart thermostat for a while on firmware 90.1. I have it integrated with HomeKit and as it turns out, using HomeKit (an advertised feature) completely breaks the humidity sensor (also an advertised feature). The humidity sensor is completely out of touch and only reports values every 5% change. This…
-
Allow Tado App to display independent Temperture readings
I don't want to put a £70+ tado device with a IP20 or IP30 rating in my 99% humidity Bathroom, but I would like to be able to see the reading from a (much cheaper) none Tado Alexa enabled measurement device. Can this skill be added?
-
App translation in Romanian
Hi Tado community, Any idea if a translation of the app would be soon available in Romanian as well? I am willing to support this effort in my spare time, maybe there are other community members that would like to contribute as well. Best, Andrei
-
Flexible Schedules
I think it would be cool to have a way to make different schedules for your house. For example a geust schedule where your geust bedroom and your dining room turn to different heating schedules, whereas perhaps normally your geust bedroom would be off or run on a lower heat I also think there should be a geofencing control…
-
Tado tiles a waste of an oppitunity
I am a new comer to Tado and the biggest disappointment is the app, the tiles on the Home section is an utter shambles, I find it really stupid having to go into a tile to view the inside temp, humidity and heat request (the 3 little squiggles) and the fact that no icon with in the tiles show if the radiator is receiving…
-
Names, notes and status
It would be useful, at least to me, to be able to give a name/location note to each individual Smart Radiator Thermostat and I would also like to be able to see the open/closed status of each SRT.
-
Child locks for all devices
It would be good to have child locks for all devices, wireless thermostats and wireless AC controls. Wireless AC controls need to be fitted to make them smart but ideally want them to not be manually controlled by the occupant
-
Hot water stats
Any chance to have stats for the hot water? At the moment it is impossible to see how long the hot water has been on for a day/week/month/etc I can see when the boiler has been on but just for heating.
-
Wireless Temperature Sensor child lock
When linking temperature sensor with tado TRV and child safety lock is enabled on TRV. You can still override and control the TRV by adjusting the temperature from the wireless sensor. Please add the option to enable child lock on the wireless temperature sensor or to the room.
-
Boiler constantly on not turning off when temp reached
Hello, I have just set my Tado v3+ wireless system up to my baxi 105 he boiler and the problem I have is the central heating is constantly on. I have capped the old thermostat as to the instructions and wired the receiver to the boiler as to the instructions. So currently I am running off my old timer system. If I ask the…
-
Set manual on off temperature
I would like to be able to set a manual on/off temp. For example the room will heat to 21 and turn off. It then won't call for heat until the room reaches 18 at which point it would bring the room back up to 21 before turning off.
-
IFFT Fan Speed Selector
Is there a reason why selecting a fan speed in IFFT isn’t an available option. It has a drop down menu for it however just states “no fan speed options available”. Is this something that will be offered eventually?
-
Cheap Secondary Thermostats and Bridge extender
These are much requested features that I believe should be added.
-
Auto turn off and reset of smart thermostat
When a smart thermostat is on during its timed schedule and it loses connection to the bridge. Can it be written in software to automatically shut the valve and to reset it. 1. So it doesn't continue to heat the room without control. 2. The reset allows it to reconnect to the bridge automatically. The fact that the…
-
Relaiscontact thermostaat schakelt onverwacht.
Probleem: Na plaatsing van een nieuwe Tado slimme thermostaat in de woonkamer duiken er problemen op dat de thermostaat de verwarming onverwacht inschakelt, dus op ogenblikken die niet in het slimme schema staan. Hij luistert ook niet naar de handbediening: vb. ruimtetemperatuur is 19°, relaiscontact van thermostaat is…
-
Add Boiler Flow Rate temp to heating graph
Keep a record of the boiler flow rate temp on the heating graph
-
App update notes
Hello, my suggestion is to make a visible note what is new in the new versions, because I download it but i don't have time to explore the whole software for new features. Also it is going to be wonderful if the app checks for updates by itself, because many users don't have autoupdate enabled in the Play store. And I am…
-
(Slim) gebruik van de maximale keteltemperatuur om gasverbruik significant te verlagen
Het algemene advies is om de temperatuur van de CV ketel zo laag mogelijk te zetten omdat dat het efficiëntste is. Ik zie dat Tado daar niet automatisch gebruik van maakt omdat de opwarmingstijd van de kamers veel korter is als de maximum temperatuur van de CV ketel hoger is. Ik heb dit getest met temperaturen tussen 55 en…
-
Two Factor Authentication on my account please
Hello, In a world where breaches are every day an account to mess with my home Definitely needs 2FA (2 factor authentication). Please make it a priority, it is kind of weird that way less important software companies introduced this a long time ago.
-
Skip To Next Block in Schedule
hi. love tado :) here’s my thinking. i have blocks in the schedule and sometimes once i know we’re done with a room for the day, i knock down the temp for the current thermostat earlier than it would in the schedule. it would be great to be able to hit a button for a room to be able to skip on to the next block…
-
Energy IQ should also work in the desktop environment
Currently it only works in the app which is strange because usually apps are more restrictive.
-
Extension LED status on the app.
Would it be possible to display the extension kit LEDs status on the app.
-
Connexion wifi avec ac control v3+
Il serait intéressant de pouvoir commander et régler en Wifi les climatiseurs connectés plutôt ( ou en plus) de l infrarouge. Cela affranchirait les distances et le positionnement difficile du TADO pas forcément en face. Exemple Toshiba Haori connecté qui utilise l appli Toshiba Home.
-
Help make Tado better: Create subgroups in the forum and let Tado experts comment to content
As a newbie in the Tado world, I am confused by the lack accuracy, when I go through the complaints and problems. The smart radiator thermostats are often described as valves, and the discussions are further blurred by expectations to regulation performance based on a system with a boiler, while I have district heating,…
-
Temporary scheduled override
On occasion, such as getting up early, it would be great to be able to set a temporary scheduled override rather than having to adjust timeblocks for a number of rooms etc. Say the heating and hot water usually come on at 6am, but for this one day you need them to come on at 5am. With a temporary scheduled override you…
-
Energy efficiency idea: Heating schedule coalescence
My house has seven rooms, each with its own schedule. I can copy and paste schedules between rooms, but I tend not to do that because I want to tailor the timings based upon actual usage. Also, I created the scheduled years ago, before the copy and paste feature was added to the app. I know some rooms have similar times…
-
Lock for smart thermostat
Hi, Not sure if this has been suggested in the past, however a lock of the smart thermostat for me would be a great idea. I have one in my living room, and my daughter is constantly fiddling with it. On top of this, my sister in law is constantly blasting thw heating up to max when thete is no need. Being able to lock and…
-
Allow swiping to access next room
Once you selected a room you should be able to just swipe to the next room but have to come out of the room to go back to the home screen and then select the next room; this is rather cumbersome and was much easier in the pre-v3+ app
-
Open raam detectie aangeven per ruimte / show open window detection per room
Ik heb een oude grote woning (1895), waarbij de tado app nog wel eens aangeeft een open raam te hebben gevonden, terwijl alle ramen gesloten zijn. Het zou enorm helpend zijn als de app ook aangeeft in welke ruimte de app het open raam heeft gevonden. (En eventueel wat er gevonden, temperatuur daling / tocht / etc.) Hiermee…
-
Smart Rads power by rechargeable lithium ion AA batteries
Hi I just wanted to to share some tips that we can use the rechargeable lithium ion AA batteries. We can't keeps on replacing the alkaline AA as it only last about 6 months. I bought some Kentli brand it it does the job. It is still in the early days to see how long it last before indeed to recharge them. But I am hopeful…