-
Configurable schedule
Currently we can have 1 schedule for all days of the week, 3 schedules: weekdays & Saturday & Sunday or 7 schedules: every day separate. Can we get a way to define this in a custom way? I work from home 4 days a week, so to be able to schedule those days separate from all other days would be so much more convenient! It…
-
Boiler service logs/recording
Add boiler maintenance recording to the care & protect tab with reminders for servicing due.
-
Temporary heating schedule option
On the tabs for heating such as the days the ability to create a temporary schedule for the day and if I need to do it again I could select the option as it would be perfect for days when I need to give my baby a bath.
-
Different houses
I would appreciate to be able to manage my 2 houses from the same app and account. Currently this is missing
-
”Slow start” feature for less thermal stress
Opening the radiator valve fully with a cold system might cause unnecessary thermal stress on the system (and noise due to thermal expansion). Ramping up the valve for a short time might reduce the stress. I suggest a feature in line with “early start” called “slow start” to automatically ramp up the opening of the valve…
-
Tado Feature Request: Authorize by Room When Inviting a User.
Hi Everyone, I am a landlord. I have installed Tado in my family home and in my tenanted HMOs (Houses Of Multiple Occupancy where several tenants live under one roof, have their own privet rooms, and share communal rooms, such as ith=chens ad lounges). I have spent about £5K so far on Tado devices. I am delighted with the…
-
My experience of buying Tado
I am truly amazed how easy and straightforward it was to swap over my existing system to the Tado Starter Kit V3+. Right from the start, after scanning the QR code to download the app, making an account and preparing for the installation, this was a very well illustrated, easy to follow installation process. Once the right…
-
Selective boost
The boost all rooms is a nice option on occasions but what I’d really like to see is individual room boosts so if I’m working in one particular area I can boost the heating for a set period, say 15 mins without wasting energy heating the whole house.
-
Allow the setting of a specific end time when manually overriding.
Dear Everyone, Allow the setting of a specific end time when manually overriding. The way our family uses our house means that having timed heating makes no sense, so we have that effectively disabled by setting one time period for 24 hours at a low temperature (10C). We control individual rooms by overriding this…
-
Local control - not internet dependant
Given that other Smart Home products (Aqara for insurance) can now work without the internet, than it's about time Tado mixed with the times.
-
Extra functions V3+
It would be particularly nice to be able to have a few "free" functions in the app that you can program yourself. I have a function on my Mitsubishi heat pump that is not supported now. And if you can program a mobile phone to be a remote control, then surely it is also possible for Tado??
-
Ability to weight the heating across multiple radiators in a single room
I would like to be able to disable one of the radiators in my living room when, for example, we have a Christmas Tree in front of it and rely on the remaining radiator to heat the room.
-
Ability to heat and cool using a water based (hybrid) heat pump
Ability to heat and cool using a water based (hybrid) heat pump
-
Please use 0.5 degrees granularity in the wireless temperature sensor
Current granularity in the temperature sensor is 0.1 degrees in the app and only 1 degree in the device. That makes it annoyinhg, because the most standard granularity in all themorstats in 0.5
-
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode
ability to disable heat mode in the app, on tado smart ac control unit for ac without heat mode also ability to remove the heat mode displaying from the apple home app
-
display changes made via app or siri on tado smart ac control unit
display changes made via app or siri on tado smart ac control unit
-
mode control via tado smart ac control unit
pls allow to control cool/dry mode
-
fan control via tado smart ac control unit
pls enable fan control on tado smart ac control unit (speed and louver/swing if possible but at least speed)
-
Sunday Mode / Home Sick Button
When a person is off sick or the family are home during Monday to Friday the room schedules have to be updated individually. A new button like boost heating but labeled Sunday mode or sickness emoji will default all schedules to Sunday for x number of days. The button should deactivate when you hit reschedule button
-
Slim schema koppelen tussen ruimtes
Zou het niet handig zijn als je het slimme schema van de ene ruimte kan koppelen aan de andere ruimte. Meestal zijn er verschillende ruimtes in een huis die op dezelfde tijdstippen verwarmd moeten worden. Is ook handig als er meer dan 7 radiatoren in één ruimte zijn. Dan kun je de ruimte virtueel splitsen op deze manier,…
-
Energy IQ Improvement - independent TRV
Hello, A bit of context first. I moved into a new house and went all in with Tado products to make heating easier to manage this winter. My setup is as follows: Ground Floor has underfloor water heating and 2 Tado wired thermostats (Kitchen and Living Room) Upstairs has 4 Tado TRV (Bedrooms and Bath) + 1 additional…
-
One-off schedule
Hi, Would like to be able to overwrite the programmed schedule, but in anticipation. Ie if I know that tomorrow morning I will have to wake up 1hr earlier than usual, I'd like to preschedule my heating to go on 1hr earlier, but not have to adjust my regular schedule as it's for 1 time only. Right now, I'm only able to…
-
Show the wireless receivers ON/OFF graph
A single TRV can call for heat all night. And the only way to check that is to go into every single TRVs graph. Which can be many!
-
Show an overall ON/OFF graph
Show and overall ON/OFF graph that shows all thermostats. So that you can see what has been calling for heat. It will help with optimizing the schedule.
-
Hot Water button irrelevant
Hi, I'm using a separate boiler for my hot water (heat pump), not connected to the burner I'm using for my heating. As such, the hot water function is irrelevant and I would like to make the button disappear from my home screen. I also had to create a schedule for the hot water to be "always off". It would be much simpler…
-
Multiple Internet gateways
My Internet gateway failed to get a reliable signal to a radiator valve through a single wall. Can we have either multiple gateways or use the normal house WiFi instead in order to fill in dead spots?
-
Relay modules (1/4/6 channel)
Now, if we vant to create heating zones (with a pump or Underfloor heating manifold), it need a wired thermostat each zone and same number of wireless temperature sensor. It really expensive and we need buy a device that we not use 90% of it abilities... (wired thermostat, we use it a simple relay mode, not measue…
-
Tado...low heat,pump running for hours.
Hello! I have disconnected my tado V3+ cause to be honest i did not liked the way it worked,and to be more clear and on the matter of facts,i can tell you that after the instalation( bridge+ thermostat+ wireless receiver) and let the Tado to do his work i have discovered it is very annoying and frustrating to see the Tado…
-
Spread temperature range on Tado smart ac control
hi, I have a problem with Smart AC controls funcion. I have an vacation apartment that is heated by AC, and in winter time we set +8C on AC and leave it for whole season, with Tado smart AC I can heat min. to 16C that is too much for me, all I need is frost protection, or to set lowest heating temperatre. Could you spread…
-
Expose the Tado Smart Radiator Thermostats sensitivity setting in the app.
I have multiple Tado products. Also, I have 5 Smart Radiator Thermostats; they only work if the heating is at max and the heating flames are at 3. I spoke to support and they told me that they could make a change in the setting to the Smart Radiator Thermostats and set the sensitivity to low so that when heating is showing…