-
Avoiding sticking pins in thermostatic radiator valves
The pins in TRVs often stick in the closed position if the valve is left closed too long - such as over summer. Pre-Tado, I used to open the valves fully for the summer so that the first action at the start of the heating season was to force the pin down rather than rely on the spring to open it up. This avoids the…
-
More than one tariff rate in energy IQ
Would it be so difficult to have more than one tariff rate? I have 2 tariff rates. One rate for the first 2kwh and another for the rest over 2kwh. So the costs costs shown in energy iq are not accurate at all.
-
Black or Anthracite thermostat
Are there any plans to bring out a black or anthracite grey colour for the actual thermostats. I am fitting three anthracite radiators into a new kitchen and would prefer a more suitable colour than white.
-
toggle switch for schedules
hi there, my suggestion/idea is for a toggle switch for different schedules. my line of work demands that every other week i have a different schedule. one week I work in the morning, I start to work at 7AM, the next week I work afternoon, I start to work at 3PM. And then again in the morning... it would be great having a…
-
Worcester Bosch digital connection for 2000/4000/8000 series boilers
New wireless controller; https://uk.installers-shop.tado.com/products/wireless-smart-thermostat-starter-kit-v3-eu-version can you please add EBUS communication with the combi/system boilers to support modulation, since these are one of the most popular boilers available in the UK with modulation its stupid not to have the…
-
Group Rooms together
Hi, It would be beneficial to group rooms and schedules together. For instance if I want to boost the temp in certain rooms or update the schedule in certain rooms. I can hit the boost button or schedule them together
-
Boost heating until custom temperature is met
Hi, I would like to suggest a custom feature that. Currently when you boost heating it keeps going until the temp hits 25 or is turned off. I suggest you should be able to boost the temperature to a custom defined temp such as 21 or 22 degrees. Many thanks Neil
-
User configuration of "Early Start"
It would be good, if WE could set how long it takes for OUR ROOMS to heat by 1˚c (each room should have it own setting), then early start may actually be useful. Time to heat by 1˚c: 0hrs 30mins So if the room has a target temperature of 19˚c, and the current temperature is 16˚c, early start would kick in 1 hr 30 mins…
-
Restore single tap for manually override
Hi, In a recent app release (maybe 7.0.0) the ability to single tap to set a manual schedule was removed. Please bring it back! Before this was removed, it was possible to tap on the HW switch or room slider which would invoke a manual schedule that could then be edited and adjusted. Since the change, it's now necessary…
-
Mac M1 and the Tado App
Is it possible to allow the app to run on the M1 and M2 series Mac computers ? Not everyone in our home has a smartphone, so it would be nice they can use their laptop to control Tado. I asked this question a year ago but no one seems to care. It requires no extra programming, just a setting to make the app visible on the…
-
Boiler Switch On Activity
Having several rooms disconnected (independent) from the boiler it's not possible to know which room has activated the boiler and for how long. Just like the report for each room showing the heating statistics, it would be great to has the same for the boiler. It would show what time the boiler switched on and off, and…
-
Heat hot water on return home
Idea: I have my hot water set to heat 2x per day - 1 in morning and 1 in afternoon Sometimes I’m out in the afternoon when my water is scheduled to heat. An awesome feature would be, if I’m out when the schedule block occurs, and geo fencing means my water is turned off, when I return home again the water should be heated…
-
New Device - Tado Immersion Hot Water Heating Controller
Many homes having a hot water storage cylinder would also have the hot water heated by an element in the cylinder either as standard or as a backup option to the gas heating system. I wanted to raise this subject here to help gauge if there is actually an interest within the community of Tado users? Do you have a hot water…
-
NEW DEVICE - Multiple Heating Zone Controller Extension Kit
Currently where you have a “System Boiler” that heats your hot water in a cylinder there is only one device available that can control your hot water separate to one heating zone. The extension kit. Larger homes are now being fitted with multiple heating zone control, particularly where you may have a split between…
-
Sweden language
I can. Help with sweden language i U want
-
Tado Feature Request: Authorize by Room When Inviting a User.
Hi Everyone, I am a landlord. I have installed Tado in my family home and in my tenanted HMOs (Houses Of Multiple Occupancy where several tenants live under one roof, have their own privet rooms, and share communal rooms, such as ith=chens ad lounges). I have spent about £5K so far on Tado devices. I am delighted with the…
-
Add current Boiler Flow rate to graphs if using Digital Link
As Tado˚ knows the flow rate temperature of boiler at any given time, can this information be added to the graphs, as you hold your finger on the graph, see example below This would help us to determine if we can adjust the MAX Flow rate to be more efficient or if the Flow Rate is not high enough and the boiler is…
-
Manual mode for smart radiator thermostat
I would sometimes prefer to keep my radiator always pleasant warm instead of turning it off and on every time temperature on sensor rises and falls. I suggest to introduce manual mode where user manages the valve position like on a regular thermostatic head. Let's say on the usual scale 1 to 5 instead of setting the target…
-
Lock/Limit Selection of Temperature on Thermostat via App
I currently have a Tado installed in an air BnB and recently I had a guest which turned the temperature upto maximum for a couple of days. It would be a good feature to be able to allow us to limit what temperature the Tado could be set to within the App. For example, limiting it to 22C or even locking it completely.
-
Alarms when temperature exceed setting
My daughter is away for a full academic year abroad. I did set temperature to 15 deg c close the doors and forget about it….. a few week later my wife went into her room and discovered the temperature at 35.7 deg C! what not having an alarm alerting dot this? thank you
-
fahrenheit/celsius toggle
Hello! We use Tado at home & are quite happy with it. It is not linked to Alexa or Apple Home or any of those fancy things. We just use the Tado app. It would be great if there was a toggle in the settings where we could change the temperature from celsius to fahrenheit or vice versa. I checked the forums & there wasn't…
-
Better Siri Integration
Hey Siri, boost heating Hey Siri, boost heating for an hour
-
App should indicate if a room schedule is active or not
On the main home screen with a list of rooms. There is no indication on a room if the schedule is active or not.
-
Cubic Feet and Standing Charge in Energy IQ
It’s great being able to add meter readings to get an idea of cost but in the UK many meters are in cubic feet not cubic metre so would be good to have this as a measurement type. Also the forecast cost does not include a daily standing charge and it would be really useful to be able to add this too…
-
Ability to cool using my smart thermostat?
Hello, I wish the smart thermostat had the ability to cool as well. My geothermal heat pump heats as well as cools. Right now I can only use Tado for heating. It would be great if I could change the mode of the Tado Smart Thermostat to 'cool' in summer and 'heat' in winter. If you need more information about my set up,…
-
Option to see humidity on home page room buttons
Hi, in our house we struggle with high humidity in the winter. I find the tado humidity sensors in the radiator valves to be very useful, but it would be even more useful if I could see at a glance the humidity in all the rooms. On the app homepage I can see at a glance all of the room temperatures in the 8 rooms I have…
-
"Lifestyles" - multiple user set memory presets of temperatures for each room
Add a section to the Tado app for "Lifestyles" (or similar name to avoid copying Honeywell Hometronic/ Evohome/ Evotouch) Multiple user set presets so a one button push in the app will activate or deactivate a memory programme with user pre-determined temperatures for each room. i.e. Lounge 22 deg, Kitchen 21 deg, Bedroom…
-
Sleep mode on tado thermostats
Sleep mode to toggle to a different temperature setting like away mode. I go to sleep at different times.
-
Time for Matter
Being able to interconnect with other devices, sometimes produced by multiple vendors in a smart house matters(pun intended), especially when the internet goes down. A smart home is a sum of all its smart devices. Currently tado is one of the multiple weakest links at least in my home. For tado to “matter” in our future…
-
Scheduled "Call for heat"
atm we have the option to enable or disable a zone controller, and this stops the room calling for heat from the boiler. But, I think due to the cost of living crisis around the world atm, it would be a good option if Tado˚ could move this option to the Scheduling screen. My idea would be for each time block in the…