-
Notification when device looses connectivity
Please make so the app gives you a notification if one of the devices looses connection.
-
Temperature presets
When adjusting the temperature for a specific block i do need to edit all time/day blocks individual, which is cumbersome. An enhancement could be the ability to have a couple of preset temperatures which can be assigned to the time block. Like "high temp." "low temp." "night temp." And when i then change the preset all…
-
Improved internet bridge / Better range.
I live in a property with 3 floors + a basement and my networking setup is on the top floor Attic and find devices in living room and basement disconnect from the tado bridge. I have Philips hue and everything works flawlessly throughout. The capabilities of the Tado Bridge needs to be improved for longer wireless range or…
-
Boiler external weather sensor + tado
It would be nice for tado to use the boiler external weather sensor if installed while running on opentherm/bus for more accurate heating. Why? Well, weather stations are not all over the place and not so accurate in some zones, so it would help people in remote locations.
-
Blocage de thermostat a distance
Bonjour, ce serait bien de développer un blocage d'un thermostat a distance et que lorsqu'on a des locations, comme ça on gère le chauffage et il n'y a pas d'abus avec des réglages de chauffage a + de 25 Degrés...
-
Hot Water temperature control
See this thread https://community.tado.com/en-gb/discussion/comment/54598#Comment_54598
-
Commande tadoo pour les poêles à pellets
je voulais juste savoir si vous pouviez mettre vos ingénieurs sur le coup et inventer un tadoo compatible poêle à pellets ça devient important pour nous personne ne commercialise ce système et pour ma part la marque Mcz ne souhaite pas faire évoluer ces anciens poêles en wifi. la télécommande est infrarouge elle prend la…
-
viessman eco mode for DHW
I own an viessmann vitodens B1KF on opentherm protocol apired with tado v3, since i changed to opentherm my eco mod(preheat) option disappeared from both boiler screen and vicare app. its not on viessmann side i ve talked to viessmann and they said this: "Have you spoke to Tado about the DHW temp setting ? The ECO stays On…
-
Central Heating On/Off missing feature on Tado app
There is a feature to turn Hot Water on or off in the app but no feature to turn Central Heating on or off. For anyone with a dual heating system for central heating, e.g. an oil fired boiler connected to a Tado receiver plus an alternative heating source, such as a solid fuel boiler, it is essential to turn off the oil…
-
Provide estimated gas consumption from the boiler
Where possible and depending on the boiler model, would very useful to get an estimate on gas usage if the boiler can provide such.
-
Change Zone Controller in time block
Hi there, I'd like to be able to add and remove the Zone Controller from certain rooms in different time blocks. I'd like to have my kids rooms call for heat from the boiler at night but have them not call for heat during the day. I'd still like the rooms to get heat if some other room was calling for heat though so…
-
Climate report in Tado Web app
Hi, To me, the availability of the climate report in the web app - app.tado.com - would be a big improvement. Preferably combined with option to export (CSV) and also to compare the reports between different (or similar rooms (between bedrooms fi). This is feature high on my feature list. Greetings Christophe
-
Powered Smart TRVs
Could you introduce AC-powered smart TRVs with a rechargeable battery backup please? Haven't had enough use of the units on battery so far, but want to get away from constantly changing batteries in the household. Take this a step further and have them communicate across the home power cabling to the Internet bridge.
-
Relais vloerverwarming bij 1 golfje ook volledig open
Blijkens antwoord van Tado is een als relais ingestelde slimme bedrade thermostaat op een Honeywell Zoneklep maar 33pc van de tijd open bij een warmtevraag van een golfje. Dat betekent dat als je temperatuursensor in de kamer met vloerverwarming een warmte vraag naar de ketel stuurt, de zoneklep niet geopend wordt; voor…
-
Portrait graphs
Please make the temperature graphs visible in portrait mode too, now I always need to rotate my phone in order to see the graph - this is quite annoying. For the rest, keep it up! Absolutely love the product, the installation manual, the software, the app, it’s a great product :)
-
Set A/C mode across schedular
I have an a/c unit that I use to cool the house in the summer and heat in the winter. Using the tado a/c controller, if I set the a/c mode to auto it creates a problem. When a scheduled time block has a lower temperature than the one before it, the a/c will actively start to cool. In the winter this is not a desired…
-
Unified schedule view
Please could you consider creating a unified schedule view for all rooms and their schedules to allow for bulk editing and copy/paste.
-
How to improve tado? Hint - it's not product development.
I've been a tado user since its UK launch, running a v1 product that over the last decade, has been pretty stable. My own tado experience? Meh, it's a central heating thermostat, and it almost always does what it's supposed to do, and pretty well too. So why have I still not installed the replacement v3+ I bought over a…
-
App Notification
Add notification on the home tile page to show that tado are performing maintenance or are having issues. Twice this month I can see the internet bridge cannot connect (network tools) and the boiler stays on.
-
Dual SRV Offset
I know that the Smart Radiator Valve offset issues have been discussed extensively but I would like to offer my 2 cents. In one of the rooms in my apartment, I have a tado SRV installed and I also have a room thermometer. I check their measurements from time to time and when not heating they are very close to each other…
-
Add an Alexa feature: "Alexa, what is the humidity in the living room/bedroom/etc"
The Tado app clearly shows that humidity is being tracked. We can see the humidity in all the rooms. So those sensors are already present in the Tado devices. Yet, I can't ask Alexa to tell me what the humidity is. I'm a programmer, and I know that this wouldn't take a great deal of programming to implement. So I'm…
-
Early start for radiators
I tried early start in normal rooms with radiators and found the early start begins excessively early (like 4 hours!) and was advised this feature can only be used for very slow systems like underfloor heating. Pity it cannot learn over time how long it takes to heat the room, take outside temperature into account, and…
-
fonction iFeel Clim Gree
Bonjour, a quand la fonction iFeel intégrée au tado pour une meilleure efficacité et gestion de nos climes.
-
Hot water tank smart thermostat
I think there is a market to provide a variation on the Smart Thermostat in the form of a unit with a temperature sensor on a cable, to allow the user to install in a thermal water store. This can give the flexibility for hybrid systems that have multiple heat sources for the store such as Solar thermal, biomass and oil or…
-
Connect to enery supplier as a service
It would make it a lot easier and simpler to have a service that connects to the energy suppliers. This would make the the usage and money part of the application a lot more accurate to manage. I have already seen this service offered by some online applications.
-
Support for multiple people and multiple zones
With current geofencing, if all devices are away from home all zones are set to away. If at least one device is at home, all zones are set to home. Ideally, this should be more granular. As an example: We have two devices, mine and my partners. We have four zones: my study, my partner's study, a shared bedroom and a shared…
-
Geofencing by person
In a multi-person household, geofencing could be tailored so that one person leaving could adjust part of the house leaving the rest heated for those remaining inside. So if I go out, for example, the room I use most of the time could be left unheated, but other rooms still follow their usual schedule.
-
Custom name per device beside room name
Currently any device has the name of the room and a non descriptive id. To be able to identify for example the device with low battery it is useful to get a notification for a device with clear name (e.g. under window radiator, bedroom 1, bedroom 2)
-
Retaining screw on smart rad valve.
The smart Rad valve needs a retaining screw. This would stop people from accidentally unclipping the head from the screw on base while twisting the top.
-
Winter, Autumn, Summer Schedule
Please can you create a Winter, Autumn & and Summer Schedule. The aim is to be able to set heating on and off times for each room based on the Winter / Autumn or Summer Schedule. In each season the the heating and water needs to start at different times and be on or off each room in room. This would be very helpful.