-
Support for multi-zone UFH manifolds
The current integration with underfloor systems appears to be limited to single zone systems without zone actuators. A lot of UFH system are UFH downstairs with radiators upstairs. The UFH system typically have more than one zone with actuators per zone and a shared pump. Currently, I can get a multi-zone UFH management…
-
Black or Anthracite thermostat
Are there any plans to bring out a black or anthracite grey colour for the actual thermostats. I am fitting three anthracite radiators into a new kitchen and would prefer a more suitable colour than white.
-
New development idea - define a maximum upper temperature
Hi, I like very much your products and have 2 of your thermostats installed in my house. But there is one functionality I really miss ..., hence this note. You probably already thought about it but just in case, here you go: within current context of very expensive energy you certainly have customers willing to LIMIT the…
-
Humidity notification
Tado keeps also track of humidity percentage in the room, it would be useful to receive a notification when it reaches a certain percentage so that I can open the windows and clear some hair.
-
Boiler Switch On Activity
Having several rooms disconnected (independent) from the boiler it's not possible to know which room has activated the boiler and for how long. Just like the report for each room showing the heating statistics, it would be great to has the same for the boiler. It would show what time the boiler switched on and off, and…
-
More than one tariff rate in energy IQ
Would it be so difficult to have more than one tariff rate? I have 2 tariff rates. One rate for the first 2kwh and another for the rest over 2kwh. So the costs costs shown in energy iq are not accurate at all.
-
Bridge connectivity
As with many people on the forum, I have had connectivity issues in a house with the router and bridge at one end of the house. In the end, I had to return some sensors back to a non TADO alternative. I have just found that a tp-link powerline adaptor AV 1000, would allow the bridge to be connected remotely to the router.…
-
Worcester Bosch digital connection for 2000/4000/8000 series boilers
New wireless controller; https://uk.installers-shop.tado.com/products/wireless-smart-thermostat-starter-kit-v3-eu-version can you please add EBUS communication with the combi/system boilers to support modulation, since these are one of the most popular boilers available in the UK with modulation its stupid not to have the…
-
Firmware 96.1 and Apple HomeKit
Same device, same tado° app Apple HomeKit tab - Firmware 91.1 tado° Rooms and Devices tab - Firmware 96.1 ¯\\\_(ツ)\_/¯
-
Boost heating until custom temperature is met
Hi, I would like to suggest a custom feature that. Currently when you boost heating it keeps going until the temp hits 25 or is turned off. I suggest you should be able to boost the temperature to a custom defined temp such as 21 or 22 degrees. Many thanks Neil
-
User configuration of "Early Start"
It would be good, if WE could set how long it takes for OUR ROOMS to heat by 1˚c (each room should have it own setting), then early start may actually be useful. Time to heat by 1˚c: 0hrs 30mins So if the room has a target temperature of 19˚c, and the current temperature is 16˚c, early start would kick in 1 hr 30 mins…
-
Heat hot water on return home
Idea: I have my hot water set to heat 2x per day - 1 in morning and 1 in afternoon Sometimes I’m out in the afternoon when my water is scheduled to heat. An awesome feature would be, if I’m out when the schedule block occurs, and geo fencing means my water is turned off, when I return home again the water should be heated…
-
Restore single tap for manually override
Hi, In a recent app release (maybe 7.0.0) the ability to single tap to set a manual schedule was removed. Please bring it back! Before this was removed, it was possible to tap on the HW switch or room slider which would invoke a manual schedule that could then be edited and adjusted. Since the change, it's now necessary…
-
Mac M1 and the Tado App
Is it possible to allow the app to run on the M1 and M2 series Mac computers ? Not everyone in our home has a smartphone, so it would be nice they can use their laptop to control Tado. I asked this question a year ago but no one seems to care. It requires no extra programming, just a setting to make the app visible on the…
-
More rooms for extension kits
Tried to add a room to extension kit but limit is 10 rooms I cannot have more than 1 extension kit so I am restricted to a maximum 10 rooms can the limit on amount of rooms be increased for extension kit?
-
NEW DEVICE - Multiple Heating Zone Controller Extension Kit
Currently where you have a “System Boiler” that heats your hot water in a cylinder there is only one device available that can control your hot water separate to one heating zone. The extension kit. Larger homes are now being fitted with multiple heating zone control, particularly where you may have a split between…
-
Sweden language
I can. Help with sweden language i U want
-
It should be possbile to select the wanted fan speed at Homekit, IFTTT and other services.
I just bought a new Tado Smart AC Control V3+ to control my Mitsubishi Electric FH35 heat pump, based on the measrument from external Netatmo- temperature sensor. First I integrated Tado to Apple Homekit, but when I created on automation (such as "if temperature is below 22c, set Tado for Heat mode"), I noticed that I…
-
Manual mode for smart radiator thermostat
I would sometimes prefer to keep my radiator always pleasant warm instead of turning it off and on every time temperature on sensor rises and falls. I suggest to introduce manual mode where user manages the valve position like on a regular thermostatic head. Let's say on the usual scale 1 to 5 instead of setting the target…
-
Better Siri Integration
Hey Siri, boost heating Hey Siri, boost heating for an hour
-
Lock/Limit Selection of Temperature on Thermostat via App
I currently have a Tado installed in an air BnB and recently I had a guest which turned the temperature upto maximum for a couple of days. It would be a good feature to be able to allow us to limit what temperature the Tado could be set to within the App. For example, limiting it to 22C or even locking it completely.
-
Show humidity as sensor in homekit
It’d be really useful to have the humidity from my tado devices show up as a sensor in homekit. This would allow me to add automations with other devices (eg when humidity goes above a certain level, turn on the dehumidifier)
-
Reading out Smart Energy Meter
Dear TADO development, Im am trying to make my Eneco TOON redundant and have it replaced by TADO, however what I would miss the most would be the Smart Energy Meter readings (day, week, month, Year) both Power and Gas consumption. This is not a nice to have function if you claim to reduce energy consumption. The saving…
-
standard temperature: lower
The standard temperature of TADO is 21 degree C.. If that is true, isn't it a better idea to lower this standard temperature on behalf of the climatecrisis and, recently, saving costs? For example lower it to 19 or even lower temperature. If someone wants to heat more, be free with TADO to do that.
-
Sleep mode on tado thermostats
Sleep mode to toggle to a different temperature setting like away mode. I go to sleep at different times.
-
Adjust temperature or Boost Heating feature
Boost Heating is useful but the default 25C value is, in my opinion, too high. I would like to be able to change this, eg. To 22C.
-
App should indicate if a room schedule is active or not
On the main home screen with a list of rooms. There is no indication on a room if the schedule is active or not.
-
Large House Capability
I have a new Tado system fitted to an old oil boiler and I am mostly loving it. The issue I have is thick walls and scalability. I have maxed out devices so had to change back to regular TRVs in some rooms and I have maxed out on zone controllers. The bridge can never see all TRVs or Wireless Temperature Sensors (WTS) at…
-
Ability to cool using my smart thermostat?
Hello, I wish the smart thermostat had the ability to cool as well. My geothermal heat pump heats as well as cools. Right now I can only use Tado for heating. It would be great if I could change the mode of the Tado Smart Thermostat to 'cool' in summer and 'heat' in winter. If you need more information about my set up,…
-
Option to see humidity on home page room buttons
Hi, in our house we struggle with high humidity in the winter. I find the tado humidity sensors in the radiator valves to be very useful, but it would be even more useful if I could see at a glance the humidity in all the rooms. On the app homepage I can see at a glance all of the room temperatures in the 8 rooms I have…