-
Extra safety feature
For some reason my Tado heated up to 57c after a change of installation in the setup menu. Therefore I think a check/failsafe in the firmware of the Tado for when the temperature goes up to more then 30c in a short period it should turn itself of and give a notice in the app. It melted My Tado wired where you press to turn…
-
Add Humididty to Climatecomfort screen
Could you add humidity next to C° on the screen ? See screen capture Thx
-
Essential Tado App Improvements
Hi everyone, I have been asked by Tado to post my request that the IQ energy facility within our Tado Apps be updated to include our electricity readings. This because... wait for it, you're not going to believe this... So us Tado Customers can vote on whether this should be included within the App. I can almost hear the…
-
"Advance Heating" Feature
This is a standard feature in most heating systems - some form of control to advance the heating to its next programmed state. Scenario - it's 22:00 and I want to go to bed early and turn the heating off. The heating is programmed to be on until 23:00. Of course if I TURN OFF all rooms that works, but the problem here is…
-
3rd party temperature sensors
It would be a great improvement if one could have the ability to use a temperature sensor already in the room (which is i.e., HomeKit compatible) to control the radiator valves. This will give a much more accurate temperature control in each room. If you already have a temperature sensor in the room used for another…
-
Add support of CAN-Bus
Many pellet boilers manufacturers (Froling, Guntamatic, Hargassner, Herz, ....) are using CAN-Bus modulating thermostats. Would be great if Tado could support CAN-Bus protocol in order to replace these thermostats, in modulating mode
-
Maximum Temperature of the Boiler
I use tado on eBus interface. I want to set up myself the maxim temperature from the boiler. The condensing boilers are most efficient at 55-60%.
-
Changing the maximum flow temperature myself
Initial problem: Hello, i have a Ferroli Bluehelix PRO 32C heating central. I use tado for 3 years now. After last update of Tado APP to version 6.0.2 (9826) i found following bug. I limit maximum temperature of heating using heating buttons on my boiler to 55C. After this update, maximum flow temperature is reseting…
-
6.38 crashes on my iOS device but 6.37 doesn’t
After reporting a crashing bug I saw on iOS. I’ve been prompted to help by suggesting a feature after relating the information that I essentially rolled back the version from 6.38 to 6.37. So I guess the new feature could be: How about new beta test 6.38 doesn’t crash like 6.37 didn’t? :) The application //started showing.…
-
Radiator thermostat colours.
Does any one agree with me that it would be really useful if there was a range of colours for the radiator thermostats? They could be available to match the many colours of radiators that are available. My new radiators are anthracite and the white Tado thermostats seem a little out of place.
-
Early Start Phone App UI changes.
I was asked by Tado˚ to start this discussion, so here goes. In the Web App when the room is calling for heat due to "Early Start" it is shown in the UI like this. But, this does not show in the Phone App, so you think the room is calling for heat for no reason and can be confusing...
-
Boiler service anniversary date
I've just installed Tado and I'm quite impressed. A concept/product which lives up to the hype. I was though surprised that in the care and protect section though there doesn't seem to be any option to add a boiler history, eg install date and then service anniversary. An oversight when there is an option to book a…
-
UX improvement: long-press
Would be very nice if the iPhone app allowed me to “long-press” on a room to quickly turn the heat off or resume its schedule.
-
Google Assistant An Alexa new (hot) keywords (resume schedule or resume heating schedule)
I am missing a feature for the google assistant and alexa. Feature to say "resume schedule" or "resume heating schedule" I think that this will benefit a lot of people. when you do a manual overwrite of your schedule it does not automatically resume the heating schedule Dutch : Ik mis het commando "schema hervatten of "…
-
Notification requests...what does the community think?
2 requests I would like to see on the app: 1. The status of the heating indicator on the receiver whether on or off I would like to see in the app on the home page. I know you can see it by clicking into the individual rooms but this doesn't tell you if the heating on receiver is on or not. This only tell you the…
-
No Zone Controller via Schedule
I did search but could not find anything regarding this, I would like to see the ability to assign a rooms ability to allow the room NOT to call for heat the room during the day, and at night allow the room to call for heat. This would allow the room to not drop temperature too far during the day. What do you guys think ?
-
Activate Home mode via timer or at a specific time
It would great if I could schedule to active home mode at specific time. e.g. 3 hrs before I get home from a weekend vacation.
-
FEEDBACK
I love my TADO product but whilst I appreciate you think you’re moving into the future by only allowing online chat to consumers but for me it’s very limiting/time consuming and in my humble opinion would not make me buy your product.
-
Named schedules for different situations
I have a 4 bedroom house in which I live with my wife, however, we often have visitors. We only need certain rooms heated for our own use but we have a childrens bedroom which we want heated to a specific schedule when our grand children stay over. We also have a bedroom and bathroom which we only want to heat when we have…
-
Add new colour to the Temperature graph for "Early Start"
As title say's I think it would be nice to add a different colour to the graph that depicts when "Early Start" was invoked. to this graph
-
Increased Aircon Functionality
1) My Aircon has boost and eco on the remote. Could these be added to Tado app please? 2) Auto on my remote alows +/-6c around 24c. The Tado app does not allow temp setting in this way in Auto mode.
-
Smart Radiator Thermometers
I previously purchased smart radiator thermostats for my Tado system however they were too noisy in the bedrooms and led to a few queries which I raised with Tado (however they have asked for these queries to be posted here). Hopefully there is a solution! Is there a way to set the bedroom smart radiator thermostats so…
-
More controls over temporary temperature changes
When it comes to the room controls when you manually override the set temperature it would be good to have the following options: A shortcut to bring forward / advance to the next programmed setting e.g. if it's 1pm and the heating schedule will change from 10C to 20C at 2pm, I could press a button which will automatically…
-
Silent Operation during defined hours
We have manual TRVs before. Of course, they didn't shut off when we left the house, but at least they don't make a sound. Currently our Tado TRVs wake me up at night, despite sleeping with earplugs. The entire family are a bit surprised by the noise these TRVs make.. So, I want to suggest Tado adds a "silent operation"…
-
Heating Activity on Home Screen Tile
On the Home Screen, some tiles have additional icons within them. The Hot Water has a dripping tap, the Air Comfort has a wind symbol, rooms that are in Frost Protection have a power on/off symbol. My question: Why can’t “active” rooms also have an icon within the tile to indicate current heating state, by making use of…
-
Turn OFF all rooms....only till next schedule change
May I suggest an improvement to the app/system functionality? And that is to give the user the option, when using the “Turn OFF All Rooms”, that it only applies until the next schedule change. Last night I went to bed early, so hit “Turn OFF all rooms”. However, that meant that it was cold this morning (as I forgot to…
-
Turn off whole system for specific timed limit
Hi all, my suggestion is to be given to option to turn off the whole system for a time limit as you can with each individual thermostat. My family’s schedule isn’t the same day to day or week to week and changing the current schedules on a daily basis is time consuming. However when that last person leaves we do know when…
-
Multiple bridges per house/apartment
We live in a large house with thick concrete walls. It is difficult to cover the whole house with one bridge respectively to reach all Tado products with one central bridge. I have two bridges at home, but I can only register one in the app. It would be very helpful if I could register two (or more) bridges. This way I can…
-
Wireless receiver status in app
Can we show wireless Status in the tado app?
-
Tado device automatic restart
Hello. Each electronic device needs a restart one in a while. My Tado device needs a restart once a week otherwise it will stop issuing commands. Everyone may have or will have the same problem. Hence, it would be good to implement a feature of automatic restart once or twice week (at night for example), so to avoid that…