-
Notification when heat is turned back on automaticly
Hi. There is the feature where you'll get a notification if there's an open window and then you can click the "turn of heat", the heat stays of for a period of time and then on. My request is a feature that makes it possible to get a notification when the heat then turns on again - so that I know to close windows/the heat…
-
Manual temp changes always “Until next automatic change”
Manual temperature changes should by default be set to “Until next automatic change”. What if someone sets it to 23 degrees, forgets about it and is away for a few days? Not everyone uses geofencing.
-
Ability to remove and add a Tado thermostat without resetting HomeKit setup.
May I please request an enhancement request for not requiring a reset when adding and removing Tado thermostats? For example, IKEA Tradfri doesn’t require me to reset my HomeKit setup when adding or removing devices. I have many HomeKit automation and scenes which mean adding and setting up all the tado devices is…
-
Custom period not-measuring for Intelligent radiator thermostat when it is heating
When the Intelligent radiator thermostat detects a temperature below the target one, it enables the heating mode on the Boiler and the radiator. However, the radiator thermostat (by design) is so close to the radiator, that when it turns on, the temperature it measures is very high even though the room temperature is…
-
60 minute hot water boost
I changed from the British Gas system to Tado, one of the things that was very useful with the former system was a 60 minute hot water boost, it would be useful if this could be added to Tado’s already great system.
-
Heating history in web site
On the Android app I can see the heating, temperature and humidity status history of a specific room. On the PC however I can't. It would be nice if this feature was available from the PC as well.
-
[Smart Schedule] Add ability for time block to do nothing (currently an action is forced)
Hi there, I recently bought the Tado Smart AC Control V3+. The purpose of the purchase was to be able to fine-tune the AC temperature throughout the night (while I'm sleeping) by using the smart schedule. My main problem with the smart schedule is that each time block forces an action on the AC. This means that if I wanted…
-
[Feedback Request] Improvements to the manual control
Hi all, Please take some time to leave some feedback in this topic:
-
Fixed temeprature back to normal setting when next slim time blocks starts
When i chose a temporary adjusting of temperature this will no reset by starting next time block so it stays for ever on the temporary setting ?
-
FIRMWARE FEATURE - temporarily adjust temperature on thermostat within SCHEDULE mode
PROBLEM If you have Tado running on schedule mode (house icon) and you want to adjust the temperature only temporarily, you can do this via the app on your mobile phone. However, this means you always have to get your mobile phone, go into the Tado app etcetera. Others (guests) cannot do it either. REQUEST Tado user…
-
Expose temperature sensors to Apple Homekit
As the title says, would be handy to have access to the temperature sensors in Homekit to create automations e.g. when temperature reaches X do Y
-
[Released] Child lock
tado EDIT 16.02.2021: Child lock should now be available in your app / my.tado.com You can activate the feature by going to settings, rooms/devices and then clicking on individual Smart Radiators to activate the child lock mode. You can read more about the feature here:…
-
[Smart Schedule] Add ability for time block to do nothing (currently an action is forced)
Hi there, I recently bought the Tado Smart AC Control V3+. The purpose of the purchase was to be able to fine-tune the AC temperature throughout the night (while I'm sleeping) by using the smart schedule. My main problem with the smart schedule is that each time block forces an action on the AC. This means that if I wanted…
-
Auto valve calibration
I've occasionally noticed radiators getting warm when they should be off due to the valve needing recalibration. It would be useful if the valves periodically auto callibrated (which would also serve as an anti-seize function) or could auto detect if they temp was unexpectedly rising and trigger a calibration.
-
Need a meter for hours heating was on
Living in a block of 8 flats, we all tap on central petrol heating. We get charged by the hours we have heating on. No information In the daily room graph (have only one thermostat) there is no indication of the time heating was actually on, from start of month / from start of day till present. Is something so obviously…
-
Tado as a trigger for routines in Alexa
Hi, I would like to use tado as a trigger for routines in Alexa. My request is similar to what you’ve done in ifttt but this time for Amazon Alexa. Use away/home mode as a trigger for alexa routines. I consider this feature mixed with autoassist geofencing very powerful for routilnes like: Automatically activating my Home…
-
Hot water schedule
Dear New Ideas Team, I operate a Tado system which incorporates a two channel receiver for separate hot water control. I'm really pleased with the Tado and it works far better than a previous smart control system I had. There is one feature I think would improve things for customers with a hot water tank however. I…
-
Clock on Smart AC display
Since Smart AC has external power supply, it would be awesome if it could display time with very faded light (or could light intensity adjusted).
-
Allow reduction of maximum temperature
Some in my household can't be convinced that manually setting the heating to 25degrees doesn't speed up the heating. I want to be able set the maximum at 22degrees, so it doesn't get set to 25 and forgotten about.
-
Improve the Alexa interface
I've just typed out a long and eloquent post on this matter and it lost it,even though it said it was posted. And yes, I know this post isn't saying anything.
-
Tado-Bridge for Fast Internet-Router
The Tado-Bridge doesn’t work with the swiss salt-router with 1gbit/s port. The tado-bridge just work with a slow port transfare.so i have to use an switch-port to 100mbit/s: https://www.conrad.ch/de/p/renkforce-rf-4279924-netzwerk-switch-3-port-100-mbit-s-usb-stromversorgung-2139962.html…
-
Alexa needs improving (Post attempt 2)
Here's a second attempt at the long suggestion I posted earlier, which was lost, even though it said it was posted. This one will be shorter. So, the Alexa interface needs to be improved. Scenario 1: If I turn off a thermostat "Alexa, turn of hallway thermostat". I can't just say "Set hallway temperature to 21 degrees". I…
-
Whole system quick boost
Would it be possible to switch on all radiators (or a selection) to a preselected temperature, instead of having to adjust the smart schedule for each? This would be useful if you have guests arriving or just want a quick heat boost throughout the house.
-
Please increase the number of rows supported to 12 (or more)
In my home, which is not exactly a mansion, I have 11 separate 'rooms' each of which needs separate temperature control (each has its own heating source - a radiator - controlled by two). Unfortunately Tado only allows a maximium of 10 rooms currently and so I have had to combine two rooms into one 'composite room' with a…
-
TRVs able to request heat from a zone controller in order that valves open
In scenarios like mine where a house has separate zones with valves (i.e. upstairs and downstairs) currently TRVs are effectively slaves to the zone controller thermostat which opens the valves. This means that the zone controller thermostat has to be calling for heat in order for any TRVs to work. The ideal would be that…
-
Tado Smart Schedule in memory feature request
This morning I lost my WiFiconnection so I was unable to operate the Tado via web an mobile app. which is completely understandable. I woke up with no hot water or heating. I had set the Smart schedules when I installed the system. I did come across this website which says you can still operate the Tado via the device…
-
Tado, please change schedule screen to vertical, like hive app:
I have change from hive to Tado for the beautiful hardware, but the hive app/schedules are an example to copy. All week visible and editable in one screen! If you click the black dot with three little white sign, you can copy and paste the visible schedule to all weekly days or a particular day of you choose. This with…
-
Smart A/C auto function
Smart AC works great apart from one major feature. Setting the A/C to Auto, so during Spring/Autumn where the temperature might need to be either warm or cool depending on the weather that day. Like universal tv remotes that you programme by pointing the IR signal and recording it, why doesnt Tado support this function? It…
-
TADO Thermostat should have option to use 12V supply
I am replacing thermostats in my existing heating arrangement with TADO thermostats. Not uncommonly my UFH and heating is controlled by a Wiring Centre which supplies power to all my thermostats. This happens to be 12V DC. I am surprised to learn that the TADO relies on a battery to power it and connect be connected to the…
-
A link to new feature releases
Could you add an Updates link where you can see all the recent and previous feature updates you’ve made. Use case: I just opened up the app and saw the ‘child lock’ feature you added, but stupidly, I hit ‘skip’ and now can’t find an (easy) way of finding it again.