-
Set AC temperature by sensor
There should be a way for Tado to turn ON and OFF the AC to get the given room-temperature choosen in the app (read by the tado sensor). I.E: The AC might have a minimum heat of 17 degrees, but it should be posible for Tado to sett 13 degrees and then have the panel switch the AC OFF at aproximatly 13.5 and then ON again…
-
second Temperature Sensor in same room
For large rooms TRVs don’t work well. If you could assign a second temperature sensor to the same room the localised effect of the TRV sensor could be counteracted and compensated for.
-
Auto switch off Airconditioner when temperature falls below threshold temp
Heating with an airconditioner is many times more efficient than with a fossil/solid fuel burning solution. However this efficiency is greatly reduced when the outside temperature falls below 40 degrees F or 5 degrees C as the outside module of the airconditioner starts to freeze and needs to use additional energy to thaw…
-
Aanpassen aanvoertemperatuur CV
Graag een functie toevoegen om zelf de aanvoertemperatuur voor de CV in te kunnen stellen. Nu moet dat heel omslachtig en tijdrovend via de helpdesk. Ik denk dat iedereen er bij gebaat is, wanneer de klant dit zelf kan aanpassen.
-
Bring 0.1 temp increments back.
After years of making sufficient improvements to the app, Tado have in my opinion really ruined the rentals settings in the app. Instead of having 0.1 increments we now have 0.5 when manually Channing the temperature. Why why why. There are so many examples of how to do this easily.
-
Reorder scene items
It would be great to be able to reorder the commands in a scene list. Presently items are added to the bottom of the list. This means that you cannot insert a new instruction somewhere else in the list and have to start over if you want to make a change. It would be great to be able to drag and drop items within the list
-
Priority order that rooms heat up in
I think it would be a good idea to be able to set a priority of what order the rooms in my house heat up in as this would help when heading home as I would like lounge etc heated up to temp first but not so fussed about bedrooms and bathrooms. This would help to save money as heating system could come on later
-
Humidity indicator
Could have added humidity level in HomeKit nearby temperature like little ⭕️
-
Multiple households
Pretty sure this idea already been suggested in the past, but I still want to re-suggest the idea. A function to manage several households with one account would be really useful for many users.
-
Wasting battery power
Why do the valves work totally independently of the main start and stop process? What I mean is, why when the pump is about to stop do the valves close? They then may need to reopen again when the pump starts. If the valve was left open it would be ready when the pump restarts. If that valve doesn't need to be open it can…
-
Apple Watch native app
With useful canned responses/quick links eg message “you seem to have left home.. [switch to Away] [dismiss] Single click. Very cool Or at a glance small tiles showing which rooms currently being heated
-
Indicate the operating mode of temperature sensors on the home screen.
On the app, the main screen with tiles for each room, add a symbol to the tile indicating if the sensor is in Controller / Independent mode and/or has been locally set.
-
Position of valve on smart radiator
It would be nice to understand for each smart radiator what is the position of the valve. In the same way as we know how much heating is being asked from boiler, this info would help to understand better behavior of the system.
-
Real Support
Your e-mail/chat only support service with a promise to get back within 24 hours is rubbish. I have been a TADO user for years and have been happy until moving home and now cant use my new system. I am currently applying to my Credit Card company to have the £1500 I just spent returned. This is because my questions are not…
-
Ploegenschema’s toevoegen aan slim schema
Graag een ploegenschema voorzien in de kalender in plaats van enkel een dagelijks/wekelijks. Graag twee-wekelijks, drie-wekelijks of herhalend om de x aantal dagen.
-
Overzicht sherm en kamer temperatuut
Op het overzicht scerm staat staat de huidige temp in grote cijfers aangeven, als je in een kamer kijkt staat deze temp. In kleine cijfers, het is veel makkelijker (leesbaarder) om in beide gevaal de huidigeen de ingestelde temp in grote cijfers aan te geven
-
RESTORE DECIMAL PRECISIO
RESTORE DECIMAL PRECISION. IT'S A CORE FEATURE! IT WAS A STUPID IDEA TO BREAK A CORE FUNCTIONALITY TO SOLVE A UI PROBLEM WITH THE CURSOR
-
Add top and bottom holes to the wall plate of the smart thermostat
I have seen that some wall boxes are rotated by 90 degrees, leaving the screws that hold the wall plate on the top and bottom, instead of right and left. To fix this I had to drill two holes in the wall plate of the smart thermostat to be able to screw it to the wall box. Improvements suggested: 1. Add top and bottom slots…
-
Knippen en plakken airco thermostaat
Heel fijn dat je kunt plakken en knippen in de thermostaten en radiatorknop, maar dit kan in de airco thermostaat nog steeds niet.
-
Adjust whole HOME by 1 degree up/down
It would be great if you could increase or decrease the whole HOME (every currently active room) by 1 degree just by using one control.
-
GPS location without Google play services
Hi, I'm not using Google play services and since tado relys to location service of Google play services, this won't work for me. There are other apps with autonomous GPS location. Can tap please add those function to their app? Otherwise this feature will not work properly for many customers which don't use Google play…
-
Tado app - Feature request - Swipe to dismiss room detail view
Hi everyone, On the Tado app for iPhone, it would be very appreciated to add a swipe to dismiss feature when being on the details of a room. Right now the only way to dismiss the room view is to click on the cross on the top left of the screen which is not handy one handed. Same thing on an iPad, it would be very handy to…
-
One button back-to-schedule
Possibility to set with one button to put all rooms back-to-schedule
-
Manual overwrite schedule
Using the app now for six months given current cold days I notice the overwrite of the schedule is not that user friendly. In stead of scrolling I would have prefere to see options (as u button) like for X hour (X as duration to set), till Y time (Y as end time to set) or till next stage
-
Show thermostates %opening graph
Hi, i woukd really like that my thermostates % opening are showed on the graph, now we can only see how much the the valve/thermostat was open with holding down on the graph and see on the 3 heating symbols, or on the 3 gray scaled colors, thats pretty much useless,,, the system have 0-100% so why not show it on the…
-
Ability to link rooms
Have the ability to link rooms together so changing the temperature on 1 room will change the rooms that are linked together. Maybe add a global change too so you can change the whole house in 1 go.
-
IOS Home Screen Widgets
Quick glance/quick change widgets for room temps. Basically, the tiles we already have inside the app, but on the Home Screen.
-
All for one
Allow manual 'Turn Off All' to accept a temperature value.
-
REQUEST: Shower / bathroom setting that turns the TRV on when high humidity detected
Many people have mould problems in the shower room / bathroom. That's one reason why they (including me) bought a TADO system - to have better background heating in the bathroom (and in other rooms). The room by room humidity tracking in the TADO app is great, and has helped with resolving dampness and mould in many rooms.…
-
Alexa commands
Can we please include the "boost heating" command in future Alexa integration updates?