-
Heating Activity Chart
I have been looking at the heating activity chart and it is quite hard to see the usage difference due the scaling on the chart. The same size columns can be very different on low usage. It would be good if the chart could auto scale depending on my usage. It would be a lot easier to compare day in day, month on month. Do…
-
Widget for iPhone
When you swipe to the right on a iphone, you get your widgets. It would be very handy, when there is a Tado widget available. I cab nmanage sereral home application through the widgets, but for Tado I must perform extra actions.
-
Oil Tank level monitor
Would it be possible to develop a Tado compatible heating oil tank level monitor?
-
Feature To Assist With Balancing Radiators
Create a feature using the inbuilt thermometer in the radiator valves to work out order to balance radiators. It could work out time to temp for each radiator and advise you if there are any getting hotter slower/quicker.
-
[Feature Request] Apple AirTags and GeoFencing
Hi, One of the limitations of the current geofencing feature is that it is limited to own devices. This means that if we have guests at home (or back when we could and hopefully when will be able to again in the near future) or someone like a nanny and me and my wife leave the house the heating shuts down. A very easy…
-
Heat differences in a room with more than 1 radiator
I have a big living room with 4 radiators installed in different parts of the room and 1 smart thermostate. The temperature difference in different parts of the zone could be as big as 2-3 degrees but the smart thermostate is in a hotter part of the room. I would like to adjust the smart radiator thermostates offset…
-
Merge "deleted rooms" with a new room created
I have deleted a room and re-configured again due to malfunctioning radiator thermostat. Now in my "heating activity" dashboard it shows the history of this room in "deleted rooms". Is there any ways to merge this deleted room to the new one I've created so the statistics aren't disturbed?
-
Apple Watch & Mac app
Would love to see the app extended to the watch and Mac app store please
-
Be able to set max outgoing water heating temperature in central heating (CV)
In the Netherlands most people have a central gas heater which pomps hot water around in the house through floors, radiators or convectors, also called in Dutch: CV installatie. What I cannot do with Tado is adjust the outgoing hot water temperature of this central heater, via an OpenThem connection, but I cannot adjust…
-
Please use 0.5 degrees granularity in the wireless temperature sensor
Current granularity in the temperature sensor is 0.1 degrees in the app and only 1 degree in the device. That makes it annoyinhg, because the most standard granularity in all themorstats in 0.5
-
App Actionable Notification for All Off/Boost
Although the Turn All Rooms Off and Boost options are useful additions to the app, without a way to say how long this is for it is easy to forget to set back. If the Tado App had an actionable notification on Android and similar on iOS when in the Off or Boosted state, then this would be much easier for users to remember…
-
[IFTTT] Determining if tado is in Home or Away mode
Without consuming a tado trigger, the following filter code can determine if your system is in Away or Home mode by just querying the last switch to Home and the last one to Away. I wrote this because I did not find any available variable from the tado triggers/queries. I use it to skip heating up early if the system is in…
-
[Device] provide main error code detection (and alerts) for Bosch/BUDERUS EMS-BUS
I have a Buderus logamax plus gb162-35 v3 boiler with RC300 module. The boiler communicates with the EMS-BUS (Bosh & Buderus) which equips many boilers and customers. If the boiler loses pressure, Tado does not detect it and does not warn me. I would like to point out that I have to deal with the loss of pressure with my…
-
Wireless underfloor heating
Hi Tado Please develop a wireless underfloor heating device. So i dont havd to switch to Netamo or Danfoss
-
Hot Water Setting
I have a wireless thermostat which gives me a option of hot water control. I have a combi boiler and, as such, I do not use this setting. Its would be great if I could remove this from the Tado Home Screen.
-
Reduce expansions tank "delta" - Control radiator valve change speed or spread open over time
Living in the Nordic countries it's quite common (due to regulation on energy consumption for households) that you end up with some type of heat pump, to power your radiators. Many of these comes with an expansion tank as the "interface" between the pump and the pipes in your house, and is used for regulating the ups and…
-
Timed off period
Following the easing of lockdown, we have been lucky enough to get away for a few days. The system went into away mode as expected but I noticed that the heating was coming on to maintain the lower away temperature - I don't like it too cold under normal circumstances. I didn't want to heat the house at all while we were…
-
Improved thermostatic AC control
The tado device and app are well made and designed which lead me to purchasing one to try out, it is a pity the "smart" features are not quite there yet. The following features would make the product much "smarter" in my view: an "auto" mode that can switch between heating and cooling for autumn/spring periods where you…
-
Support newer version of Worcester HT-BUS
I just upgraded from a worcester bosch greenstar cdi to a worcester bosch greenstar 8000 life. On my old boiler I could connect to the digital low voltage interface bus however the new boiler the ht-bus is not supported and I couldn't simply change over I had to rewire to the old relay style. The bus interface is better…
-
Away Zones - eg Work
Create ability to define zones where the app considers you as fully away from home and so turns off all heating. Background: my office is relatively near home (<20 miles) and so when using the auto-assist functionality it thinks I’m constantly on my way home and pre-heats the house. In addition, my partner also lives…
-
Please implement the possibility of disabled the three LED lights of the internet bridge
Hi Everyone, the Tado internet bridge has three very bright LED lights. I would like to have the possibility to disable those LED lights please. A configuration as described below could be useful for all users: by default, after booting, the LED's are also on but in the app and/or the web portal you can choose to disable…
-
App : dark mode
Do you plan to provide a dark mode compatible app ? When ? Thank you for my eyes.
-
Support multiple wireless receivers / extension kits
Currently Tado seems to be limited to 1 wireless receiver or extension kit per home. Please could this be enhanced to allow multiple wireless receivers/kits, as this must surely be only a software restriction. I currently have an extension kit controlling my hot water, but this is a large house with multiple underfloor…
-
Add the heating level indicator 1,2,3 bars to the Home Screen in each room
For a quick overview of which rooms are currently heating it would be useful to see the three bars indicator for each room on the Home Screen.
-
Support for multiple tado installations linked to 1 account
Please can we have proper support to enable management and control of multiple tado installations via the one account/email I stay at several locations and manage others as a landlord. When email notifications arrive they do not indicated which home they are for. Logging in/out of multiple accounts is awkward when you want…
-
tado AC: Alert if temeperature risses over certain threshold
Hi, I would like to use the tado AC for a professional purpose to control and monitor the temeperature in a server/computer room. It'd be be helpful to receive alerts if the temperature rises above a certin threshold so I know if a) something might have gone wrong (e.g. power cut) or b) in summer I can intervene remothely…
-
Problem with the wife!
Being of a generation who were not brought up with smartphone technology my wife refuses to use a smartphone and therefore the Tado app. She often uses the room thermostat to increase the room temperature in the evening and I then wake up in the night 'on boil' because the system does not revert back to it's preset…
-
Adapter for Danfoss RA
If you want your Tado thermostat assembled well on a Danfoss RA valve, please do yourself a favor and buy at the same time an extra metal adapter (eg Heimeier type: 970224700 for appr €10,-). This is the best way to fixate the thermostat. Tado's plastic adapter is rubbish and the helpdesk is playing stupid instead of…
-
More rooms for extension kits
Tried to add a room to extension kit but limit is 10 rooms I cannot have more than 1 extension kit so I am restricted to a maximum 10 rooms can the limit on amount of rooms be increased for extension kit?
-
Temporary temperature schedule
Allow users to set up a temporary schedule that overrules the actual schedule. Why? Sometimes I hear the night before that I have to work at home the next day. I want a warm office the next morning, but to do that I have to change the actual schedule and have to change it back afterwards. This is not convenient, so such…