-
Replacement internet bridge
My internet bridge has a very dodgy connection to the point that if it’s touched, it disconnects. Is it possible to just buy a replacement internet bridge and if so, where from??
-
Boiler not coming on
I have just installed full kit wireless thermostat and tvrs. But try to switch it all on nothing happens. All todo products connected and calling for heat but nothing happens. Seem to have lost hot water too.
-
System boiler - OpenTherm
Hi - hoping to shed some light on the functionality between a System boiler and Tado. I've read some info here, on the Tado site - and also contacted support (..and still could have some details incorrect). Are we safe to assume that Combi boilers are able to connect to Tado through OpenTherm, and that System boilers…
-
Design help
Hi all, I have a Grant oil boiler with a separate hot water tank. This splits into 4 circuits: UFH old house (4 zones 10 Uponor actuators) UFH new area (6 zones 10 Uponor actuators) Radiator loop (2 TRV) Towel radiator loop comes on with the hot water cycle All currently have simple wireless thermostats I'd like to move to…
-
Vaillant 631 vr65 does Tado do proper modulation now?
I have a Vaillant 631 with vr65 & vr470f (its actually currently using vr66 with vsmart). Does Tado do proper modulation now? i did purchase a full solution last year and returned as much as i can as modulation didn't work. i have seen some comments that it does work, but nothing that provides me with confidence that its…
-
Does the wired stat support open therm
Just ready to buy a couple and wondered as there is loads of conflicting answers but can anyone confirm that the wired version supports OT ? Thanks
-
Ideal Combi Logic+ 24 Wired Thermostat OpenTherm Installation
Good Morning guys, I have a wired thermostat connected to an Ideal Combi Logic+ 24 on the relay interface and all is working fine. I am not able to make it work using the OpenTherm Interface. Moving the wires as in pictures and following the instructions to set up the OpenTherm interface (D01/HW on etc) doesn't work, the…
-
What do I need?help!
:s I just got tado. I followed instructions. I think. But. I only used the wireless thermostat and not the second box. My old system had wireless control so … is this all I need? Not fully functioning yet and I’m now confused
-
Tado thermostat works but heat not coming
We have remeha tzerra ace 39c cv ketel,we have wired thermoset (v3+) installed recently all the radiator knobs are connected and working fine,hot water works at home but not heating. Can you please let us know how we can fix this and also if we have to reconnect again everything can you please provide the steps. Thanks,…
-
No power on wireless receiver
I wanted to test our central heating today, only to discover that the wireless receiver next to our combo boiler has no power. No lights at all. The app shows it was last connected on 20 July - when there was a general power cut in the street. ( We were away at the time and on return forgot to check it because I suffered a…
-
Two zone setup query and ‘calling for heat’ issue
Afternoon all setup: Dual zone, upstairs and downstairs - Honeywell CM707 controllers changed to wired smart thermostats Water controller changed out to an extension unit all TRVs changed to Smart TRVs I have the well documented issue that only when the Smart Thermostat calls for heat will a room warm up based upon that…
-
Compatibility with this system?
Hey guys Just moved house and already miss my tado, my new house has all sorts of stuff I’ve never seen before. I have a combi boiler and a large water tank, with a Danfoss controller and thermostat, can I just whack a tado in here and it will be all good? Assuming i need to buy the wifi version with hot water control.…
-
Boiler is not triggered since installing the radiator smart thermostats
Hi everyone. I know this problem was seen before but I can’t find what I need. So a couple of days ago my husband installed 4 smart Tado radiator thermostats. All well up until now… we didn’t think about trying them out so we thought that was it. Last night it was a bit cold in the living room area so we thought we might…
-
No modulation? Is Tado still saving money?
I have just installed a Tado thermostat. I have a Worcester Greenstar 29 cdi boiler, which I previously controlled with the Comfort rf 2 receiver and thermostat. I'm new to all of this - but while installing I realised that I’m not replacing the Comfort rf 2, which made me realise they’re using a different connection -…
-
Any point of wireless smart thermostat…
Can anyone tell me do I really need the wireless smart thermostat if I have all my radiators fitted with an individual Tado thermostat? If I did place the wireless thermostat in the hallway for example, that is already covered by the Tado radiator thermostat, which device takes priority and/or control of that room?
-
Compatibility
Hey guys Just moved house and already miss my tado, my new house has all sorts of stuff I’ve never seen before. I have a combi boiler and a large water tank, with a Danfoss controller and thermostat, can I just whack a tado in here and it will be all good?
-
I have just fitted my Tado wired thermostat to replace my old Danfoss thermostat.
Now my Worcester Boiler and Danfoss controller have Stopped Working. Can anyone help please?
-
Smart radiator thermostat pairing button doesn't work
Bought seven radiator thermostats a few months ago, thought I'd better get them working before winter. I have managed to pair four of them, the other three nothing happens when I press the 'pairing' button. I've tried resetting by taking the batteries out and putting them back. Nada. The wireless hub is working OK as I've…
-
Individual rooms
Hi, is there a way you can switch off individual rooms via the app? So if we’re all downstairs, it only heats the room we’re in for example, then put it on upstairs before bedtime? Thanks in advance
-
Tado system not talking to boiler after upgrade of app
My boiler/heating worked perfectly fine until 2 days ago when the app asked to upgrade. It then lost connection with all rooms and we have to restart the extension kit and the boiler. Since then the whole Tado kit stopped communicating with the boiler. Everything else is fine. The app however is now showing this hot water…
-
Why does it heat only if Wired Smart Thermostat in the status of heating?
I expect that "Living room (TV zone)" and "Living room (balcony)" are heating but they are not. What can be wrong with my configuration? "Living room (thermostat)" is Wired Smart Thermostat My Tado manages Kombi Kompakt HRE 36/30 A
-
Wireless Temperature Sensor - Redundant if SRTs on each radiator?
Hi folks, I just had a Tado system installed, and now have Smart Radiator Thermostats attached to all the radiators in my house. Each radiator is in a different physical room, and each SRT is assigned to a different room in the app. The starter kit came with a Wireless Temperature Sensor. From the way my installer…
-
Inherited system… need help
Hi, I’ve recently bought the house I’m now in and it already had a wireless thermostat system. I can’t connect!! It’s not recognising or responding to my internet to connect to the internet bridge. I didn’t install the system but assume it was a home installation by the people that lived here before. I’ve tried contacting…
-
What to do with old wireless controller?
Hi folks, I recently installed the Tado Wireless V3 kit on my Worcester 30si combi boiler. The instructions were relatively straight forward but I can't remember any information on what to do with the old wireless controller. Do I just remove it and use the Tado app? Any input would be greatly appreciated.
-
How to connect a Tado thermostat to a Nefit Smartline HRC24 boiler
I have a Nefit Smartline HRC24/CW4 STD boiler and I want to connect my Tado v3+ wired thermostat. I have a question regarding the connection at the boiler side. In the current situation, the 2 wires coming from the Nefit thermostat are connected to a ModuleLine and the 2 black wires coming out of the ModuleLine are…
-
Where did graphs go in the Android app ?
I used to be able to see temperature graphs in the Android app. Now I can't. How do I get to them ?
-
On/off modulation for Intergas cv with Daikin warmtepomp
How do I switch tado to work as on/off instead of opentherm?
-
Firmware revisions
I noticed that my Taod TRV's are on different firmware revision levels. Some are at 54.9, others at 54.12. My Tado Thermostat is at 54.8. I can not find any options to manually start an upgrade to the lates firmware. I believe this should happen automatic. I wonder then why not all my devices are upgraded at the same time.…
-
Room temperature graph not working
Hi I have today installed a TRV to my TADO system for my main bedroom today. The original TADO installation was done 2 years ago. Up till now the Graphs on the app on iOS has worked fine and able to see the temperature graphs. However at present I am unable to see the graphs for bedroom and existing living room. Is this a…
-
Wiring Smart Thermostat to Glow-worm Ultracom 30CXi
Hi, If anyone has the wiring diagram for the receiver please let me know. Thanks Mark