-
Minimum TRV level
When a TRV is closed down to less than 5% it probably doesn’t allow any significant flow and is effectively off. However, it still calls for heat, and the heat source continues to run when it may not be needed. It would be useful if the TRV closed fully once it reached a minimum threshold.
-
Dead battery actions
I may have missed the low battery email. As a result, the heater was set to Max, the room was super hot for days, with no possibility to lower the temperature. An idea would be to automatically set the temp to 20C when battery reaches 5%, or send a last email alert before it dies, or allow to manually lower the temp. Using…
-
Batterie faible pour poignée radiateur
Quand la batterie est morte, mon radiateur s’est mis en température maximale. Donc pendant plusieurs jours, la pièce était très chaude avec aucune possibilité de baisser la température. Il faudrait explorer des options, comme mettre le reglage sur 20 degrés quand il reste moins de 5% de batteries, ou permettre de baisser…
-
Show heater status
Show a right led when the heater is actually heating to raise the room temperature. Show a white led when the heater, the thermostat or their connection are out of order. Show no led when room temperature is as demanded.
-
Change Air Comfort section of APP
On the "Air Comfort" section. There does not seem to be a way to request temperature and/or humidity of a specific room. I get the impression that your algorithm aims for room temperature of 23C temperature/42% humidity. Is 23C not rather high and energy wasteful?. I am sure there is a simple way to modify your algorithm…
-
Child User Account
It would be useful to give family members different user rights on the 'People' part of the app so that only certain people can change settings and others benefit only from Geo fencing.
-
Ability to override schedule
It would be useful to be able to simply press one button in the app to nudge the schedule forward to the next event, or by pressing it twice to the one after that, three times... and so on. Just like skipping a track in Sonos. Otherwise you have to set the temperature manually and wait for the next event. Similarly, just…
-
Set a default shut off time
My kids turn on the thermostats in their rooms and every time it defaults for stay on until they (or me) click resume schedule in the app. I need some sort of over ride that shuts off after a specified time if they turn the on. Say, a option for the thermostat to run for a max of x minutes / hours that can only be adjusted…
-
Toggle wireless receiver to keep central heating always on
If you have a multiple central heating zones on a s-plan or y-plan system (common in the UK), you require your wired thermostats to take command of your heating (as they are wired to valves that divert central heating to the zones). This doesn't mean the heating is always on, it just delegates control to the thermostats as…
-
Weekly valve exercise TVRs + hot water valve + zone valves
Hi I used to have I terrrier units and they would weekly exercise the valves i.e. fully open and close to ensure valves do not stick. Also with boiler and separate hot water tank valve and central heating valve needs a weekly poke to open and close both. I have solar so in summer and a emersion element so neither of the…
-
Postponed buying 8 Tado thermostats, looking for other solution!
Postponed my idea to install 8 tado thermostats, because it appears that, nevertheless many people ask for this integration, still nothing happens. If it comes to brands that cannot be integrated with Smartthings, there are a lot more cheaper ones on the market I figured...
-
Lowest sepoint temp is 16 degrees
On my Mitsubishi AC can i set the setpoint as low as 5 degrees. In Tado app the lowest setpoint is 16 degrees. Make it possible to have lower setpoint in Tado then 16 degrees!
-
Telephone Support
Please can we have telephone support, the chat support takes too long whilst I am unable to control my heating. If chat support is going to be the only option, you should reply within the hour and also have agents available outside of normal office hours when people are free to actually contact you. I started the chat on…
-
Ability to use Wireless
Tado needs the ability to use multiple wireless temperature thermostats to control different rooms independently.
-
Self installation
We have chosen to have our Tado wireless thermostat installed professionally. The pro told us Tado as a product is fab but he says it should not be classed as self installation because once you take off the boiler cover you have broken safety regulations and would need it to be assessed by a professional afterwards.
-
Add Months to schdule
I’m a recent newbie to getting this and I found it really good. I think a great idea would be to add months to the schedules rather than just days. This would then be useful for setting the schedules per summer months and winter months.I had a digital thermostat which did that and I found worked well as never had to touch…
-
Update help/support article 6653049
Regarding this article: https://support.tado.com/en/articles/6653049-the-internet-bridge-doesn-t-connect-to-my-fiber-optic-router-modem-how-can-i-fix-this Even if your router/switch has 1GbE ports that you can configure to 10 Mb/s half-duplex, some devices might still not work with the tado° bridge. One of my switches is a…
-
poor customer service
logged an issue with my internet bridge and then spent the next 2 days going through some trouble shooting steps which in itself is ok but now i have to change what dns servers i use just to make the internet bridge connect as it does not like using 1.1.1.1 and instead it wants 8.8.8.8. Bing told my router and switch does…
-
Set each valve by number setting or temperature
Sometimes it's easier to guage what you need to set each radiator valve to, by what number it would have been set to on the old style thermostatic valve.
-
Target Range
I have UF heating that takes about 2-4 hours to heat up (it's under ceramic tiles). I have the situation where the heating is coming on for more than 2 hours just to heat the room up by 0.5c. I'd like to set a tolerance range separate from my target temperature. For example, I wouldn't want to heat the room if the…
-
Schedule control for individual rooms . . .
The ability to resume the schedule for individual rooms is really useful and I often use it when I have selected the global “switch off all rooms” and want just one, or a few, rooms to follow their cycles again. It would be even better if each room also had the option to switch its schedule individually off again as the…
-
Temperature max/ min setting locked via app
Would be nice to set temperature maximum/ minimum setting via app and leave some restricted adjustability for manual control. I want to let my kid add some heat but not all the way up to 27°C room temp.
-
Balance advanced settings (low-medium-expensive price / temperature drop)
I'd love to see more control on balance settings. I'd love to decide and set myself: -Price limits for cheap and expensive electricity. Between these 2 is medium price. -how many degrees temperature is dropped when electricity is expensive / how many degrees when medium priced -maximum hours in a row of reduced temperature…
-
energy efficiency defaults
People on this board will know how to use their thermostat, but... thousands (perhaps millions) of programmable thermostats are sold every year. The problem is that many people have no clue how to program them. One solution is to pre-program the thermostats with energy-saving settings as the default. With a few lines of…
-
More control to Tado Balance
Hello, Bought Tado V3+ yesterday to control my old Mitsubishi air heat pump. Primary reason is that I use spot priced electricity. So I subscribed for balance immediately. I also use Themo smart home thermostats for my electricity floor heating which also uses spot price. What Themo can but Tado can't do is to anticipate…
-
Model number shown in app
Can we please have the model number of the device show in the app, or at very least a serial number lookup on the support site. I have spent two hours so far trying to figure out if I can put NiMH batteries in my radiator valve. The "What type of batteries..." documentation says I can only put alkaline batteries in VA01…
-
Connect to existing wireless receiver
I have searched this forum and looked at installation videos and general searches. It seems that despite many heating systems having wireless thermostats for turning the heating on and off, via a signal to a receiving box wired to the boiler, your system requires replacing this receiver with some slightly scary rewiring.…
-
Show hardware version in the app
Simple suggestion, display the hardware version in the app along with the rest of the device settings. It might save a lot of support queries looking for this information!
-
Better control of away mode
Hi! I'm using my AC as a heat source for my summer home and away mode is very important for me. "Away mode" is not just "over the day", "while at work" in this situation but the major mode of operation. The problem I have is that you can't create time slots in away mode, so the AC have to stay on and cost money more then…
-
Make Auto-Assist and Energy-IQ tiles active upon subscription activation in the Tado app
Hello, I activated my annual Auto Assist subscription yesterday, but the Active-Assist and Energy-IQ tabs remained the same (advertising the service). I had to contact support about this, just to be told that it is expected behaviour, and that data will get populated after a month. While that makes sense, it also makes for…