-
Use standby heat setting +8/10C in my heat-pump thru tado?
Hi, I can't use standby heat setting +8/10C in my heat-pump thru tado. That is essential when I lower temperature when I am not in my cottage. Cottage could be empty for several weeks. I is no point to keep temperature over +10C. Standby heat setting 8/10C+ is separate button in Panasonic heat-pump remote. Is it possible…
-
Show current humidity in the main app screen
It would save a lot of clicks if we could see the current humidity in the main screen, close to the current room temperature. There is a lot of free space for this in each room square.
-
Colour change
Please can you change the colour of the button for care & protect from red to any other colour.. There is nothing more wallet clenching when looking on the app to see what is off & see the red of the care & protect button & start thinking.. Dam who turned the hot water on ;-) Thanks
-
remove the need for the Internet bridge or at least use the house wifi
I think it's unbelievable that devices have to use a bespoke wifi bridge and even limit the household to a single bridge. I have just installed the system into a Yorkshire farm house with thick stone walls. no way does the thermostat, CH controller and bridge connect. If the system used the house wifi (where I have a mesh…
-
Manual thermostat adjustment temperature limit
We run a B&B and every room is equipped with a smart thermostat so the guests can control the temperature in their room (normally the Smart Schedule controls the temperature). To my surprise numerous guests turn the temperature to the maximum of 25°C (I guess they just turn the control knob all the way without thinking)…
-
Service Mode for Boiler Maintenance, Draining and Power Flushing
Hello, It would be important to have a Service Mode setting, where: all radiator thermostat valves are fully open and in manual mode: can be individually set to fully open or fully closed boiler control is set to off and in fully manual mode: on or off any timers and automatic "return to schedule" are disabled This is…
-
Smart Things integration
Are we any closer to a SmartThings integration?
-
show SSS heating indicator on the room tile
on the main page of the application, where you see all the room. I would like to see the three little SSS indicating which room is currently heating, that would help me tweak the parameters of the schedule without having to click on each room at each time to see which one triggered the start of the heating system.
-
Be more intelligent with humidity warnings in Air Comfort
Right now you get warnings that your humidity is too high or may cause mould at certain hard coded values i.e. greater than 60% RH or greater than 70% RH for mould. However, humidity is only an issue when it is colder outside and humid air reaches a surface that causes it to reach its dew point by cooling down and causing…
-
Support boilers with no ability for different levels of heating better
My boiler, like many others, does not support different levels of heating - just on or off. I find it really annoying that my app says 1 flame or “heating to 20.8c” and colours the graph area in when it isn’t actually heating my house. Additionally this makes the stats on how long the heating has been running during the…
-
Activity logs
Hi, Right now it's very difficult to know if Geofencing is working or not. It would be useful to have a log that remembers a few events like: switched to away mode, switched to home mode, temperature lowered in room x, etc. This way we would know if Geofencing works correctly... My app closes all the time and since there…
-
Smart Assistant - notifying of temperature not raising as expected
It's more a feature improvement than an actual problem: I've started heating season last week and left the home for few days. The smart valves have been open all the time but temperature was not growing due to malfunction of the heating circulation pump. I've fixed it (it got blocked after summer season not being used) -…
-
RESTORE DECIMAL PRECISIO
RESTORE DECIMAL PRECISION. IT'S A CORE FEATURE! IT WAS A STUPID IDEA TO BREAK A CORE FUNCTIONALITY TO SOLVE A UI PROBLEM WITH THE CURSOR
-
Quiet fan mode - AC units
Using the setup guide, and referencing the model of Mitsubishi Electric AC units that I have, it supported a lot of the modes that are possible. One omission that I would like to have added is the "quiet fan mode". We have a unit in the bedroom that we use every night and with the IR remote that came with the unit you can…
-
App “Advance” button
I have a suggestion for the tado app. On my old boiler time controller I had an "Advance" button that advanced the settings to the next time period and then reverted back to the normal schedule once the next time period finished. On the tado app to bring on the heating earlier than scheduled, I think I have to go into…
-
Passage d'une pièce à l'autre
Bonjour, Je trouve contraignant de fermer la fenêtre de réglage d'une pièce pour aller dans une autres pièces. Il serais bien de slider pour aller d'une pièces à l'autre. Sinon l'appli est top et le matériel aussi.
-
More colours available
Everything in my bathroom is black, all switches and power outlets. Only thing white is the Tado Thermostat. When will Tado products be available in more colours?
-
Home Screen - Flag/highlight rooms currently on manual override
It would very useful to see on the Home Screen which rooms, if any, have been set manually using the app or, more likely, a radiator control (I.e. and, therefore, are not following the schedule). On too many occasions, I’ve discovered a family member or visitor has adjusted a radiator control, which has defaulted to ‘until…
-
Better Graph
Hi, I found the temperature graph lacking zoom and pointing (to have a more precise idea of the time when browsing the item). I had a Netatmo before and their graph was a little bit more usable. Cheers, lilion
-
[Released] Make the size of the current temperature in the Room Screen bigger
[tado edit]: Scroll down to see our reply from November 15th, 2021. [Original text]: On the room screen, why have Tado made the current room temperature in the room so small that (some of us with poorer eyesight) cannot see what the inside temperature is before moving the scale? this is in the top left of the screen and…
-
Usability—show visual indicator when heater is active
Unfortunately tado doesn’t give you any feedback when it’s turned the heater on or off, in my case it’s hooked up to ducted gas heating so it would be ideal to have an icon displayed whenever the heating is active (possibly subject to schedules and optional user preferences)
-
Allow display of ambient temp always on by an optional setting
The display looks great, unfortunately my previous thermostat used to display the ambient temp which was really handy. Would be great to display it all the time or on a schedule—yes I realise this will affect battery life but users should be able to choose the trade off.
-
Polish menu
Hello, can you add Polish to the application, I would be very grateful and other Poles too
-
rename Tado smart buttons
Currently it is not possible to rename the Tado smart buttons. When the batteries of one of the buttons in running low, it's quite a quest to find out which Tado button needs to be recharged, since I have multiple buttons per room. Could it be an idea to give the possibility to rename every button in order to increase the…
-
One a day Valve Push
Hi, Can Tado please implement a ‘once a day’ radiator valve push to help prevent radiator valves from seizing up over the summer months and when not used in general. Other smart radiator thermostats currently implement this and it would be very easy to do
-
Better battery performance
Rather than having good and low, introduce a medium level too. Brand new batteries show as good. Thresholds should be 75%+ Very Good Dark Green 45%+ Good Green 20%+ Low Orange 7% Very Low Red
-
Show thermostates %opening graph
Hi, i woukd really like that my thermostates % opening are showed on the graph, now we can only see how much the the valve/thermostat was open with holding down on the graph and see on the 3 heating symbols, or on the 3 gray scaled colors, thats pretty much useless,,, the system have 0-100% so why not show it on the…
-
Room specific 1h boost button
Boost button in the room tiles in the overview screen. Useful when you prepare the kids for bath or bed. I have 7 rooms/zones spread over 2 floors and I don't want to boost all the rooms.
-
More than one tado
I have a holiday home where I have installed tado and I am very pleased with the system. The remote control by phone is excellent. I would like to install tado at my main house but I can’t because you can only have one application on a phone. I think it would be great to be able to have more than one application on a…
-
Meerdere bridges in een netwerk en PoE ondersteuning
Wij leven in een huis met L-vorm, en ervaren dat het onmogelijk is met één bridge de totale oppervlakte te bestrijken. Meerdere bridges od extenders zouden dus heel welkom zijn. Mochten deze bridges dan nog PoE gevoed kunnen worden, hebben we nog enkel de netwerkkabel nodig om deze te verbinden (misschien kan de antenne…