-
Display thermostats and smart TVR always on
I have to say I was very disappointed to find that the target and/or current temperature was not displayed on the thermostats or smart TVR. We should have the option to have it on during the day. Perhaps in a dim state as a compromise? I had a Honeywell Evohome in my previous house and it did just that. Only reason I had…
-
Pollen Forecast and Outside Air cards for Hungary
Hi there! If it's possible, please add Pollen Forecast and Outside Air cards to Hungary too. Thanks, Csongor
-
User-defined temperatures and schedules to speed making changes.
Motivation is to minimise taps and clicks to change room schedules in many real-world scenarios. All of this is just software with no implications for the hardware/electronics. Temperatures: Allow user named temperatures, eg 'Toasty' = 23, 'Warm' = 21, 'Eco' = 19.5, 'Night' = 17, "Away" = 6. These could then be applied by…
-
Heating report archives and access to more heating data.
I'd like a heating report information system that would show heat loss from particular temperatures and particular weather so it would a really easy route into changing to ASHP as you'd already have a comprehensive lot of information. The day graphs are there but you can't see more than one at a time. In the phone app you…
-
Use Room Thermostat for a room without Smart Radiator Thermostat
I have one room that has a radiator where I cannot fit a Smart Radiator Thermostat. It is a Vasco design radiator that has a specific temperature thermostat: Since this is my living room, where I would like to heat just this room in evenings, my idea was to set this open when there and turn the Room Thermostat up. My…
-
Possibility to expand options thermostat clock/ Mogelijkheid thermostaatklok uitbreiden
My feedback and question: currently it is not possible to indicate in the app that you are away for several days (for example, a week) and that it is then automatically switched to the usual schedule.That would be a big advantage over the option that is now available, where you can only set 12 hours from the current time…
-
Change your business model. Build your userbase and products
Tado, I like your products but it's clear from the forums that development is slow and users get frustrated with a lack of progress on features that should be there I feel that your business model of selling hardware to users is partly to blame here as once you've sold the kit, you have no income stream to fund new…
-
Start
Waarom laten jullie niet meteen op het homescherm de ingestelde en huidige temperatuur zien. Nu moet je telkens per ruimte bekijken
-
Central heating output temperature setting, manual pump activation and some other items.
Hi all and Tado, With winter coming up and having used tado for quite some time already we can say we're satisfied with how it works. But there could be a few "upgrades" in the app and possibilities. first of it would seem a good idea to be able to set the central heating output water temperature as well, same as how you…
-
Smart AC Control V3+ doesn't support ECO mode for Mitsubishi airco's
I am the proud owner of a Mitsubishi airco and a the proud owner of Smart AC Control V3+. I would like to move to using the Tado Application only, but unfortunately it doesn't have the ECO option which the normal Mitsubishi remote control has. Could this please be added in future releases? Thanks, Gerard.
-
Aggiornare APP
sarebbe ora di aggiornare l’app e rendere possibile avere più HOME Utilizzare 2 telefoni o dover uscire dall’app è oltremodo ridicolo e non all’altezza dei vostri ottimi prodotti, nonché una funzione ormai disponibile praticamente in ogni app di allarme e controllo remoto. Credo sia doveroso per il vostro reparto tecnico…
-
Window opening time
I am asking for the possibility of extending the time of the open window, at least for 3 hours. This longer time is necessary, for example, in a family house, where the humidity in the bathroom needs to be ventilated through the window.
-
Ability to add notes to statistics graphs
Just had a thought regarding the temperature graphs. It would be nice to be able to add notes to it, to better understand how our actions impact the temperature in the house, and/or heating use. This could be things like manually adding when windows were opened (if not detected automatically), or when hot appliances were…
-
eliminazione modalità operativa su Termostato
Salve volevo farvi ragionare sulla scelta di eliminare la possibilità di impostare la modalità operativa su Termostato con il controllo clima In pratica adesso questa funzione non è più utilizzata perchè ritenuta obsoleta. Sono in disaccordo. Attualmente con l'ultimo aggiornamento avete impostato che il controllo clima da…
-
Official plugin for Elgato Stream Deck
Please create an official plugin for the Elgato Stream Deck. This would allow us to control our thermostat directly from the Stream Deck. There are unofficial plugins out there but they ask for direct entry of our tado username and password and this is a security risk. An official trusted plugin would be great. Thanks
-
Display Control for thermostat
It’s “Nice” having a white square that does nothing until you press the button, but surely having the ability to control the interface so that it could be configured to be “always On” (battery drain warning) or to display the current temperature / air quality for “X” seconds every “Y” minutes would be great
-
feature change to allow for heating season to be off or on
So, I have had this for less than a year, the app doesnt seem to have a setting to tell the goefencing its summer and so doesn't need to worry about the heating system and being away. If I switch to away mode to avoid the prompts it just prompts to say I'm back. I appreciate that someone my have air con controlled by the…
-
UI Fix - Start/End times field text is cut off
Currently in the app, the time in the start/end time the time is not displayed fully.
-
Tip
De app werk weer zoals het moet maar vind deze toch nog beter instelbaar https://app.tado.com/nl/main/home Hooplijk verbeteren ze die app Ook
-
Revert timer defaults back to the previous functionality
When manually turning on the hot water in the app, instead of defaulting to the same duration as the last request (e.g. 30 mins), it now defaults to staying turned on until the next scheduled change (which is often hours away). If this is not noticed by the user it can lead to the hot water being heated for hours by…
-
If at least 1 connected device is available in a room, to read and control from that
1) in a rooms settings and you select the measuring device. If that is connected then don’t grey out the room, put a red spot to indicate one of the devices has an issue. Allowing you to control the room still as and when the others connect they sync 2) energyIQ data source and units. Can we add litres for oil consumption ?
-
Smart AC Thermostat Battery Pack & Homekit Upgrade
Hello folks! I'm a tado enthusiast and I built quite an ecosystem at home: always felt that tado products have an extra kick both in design and experience customization which made me choose them above the competitors. I was a bit turned off by the Smart AC Thermostat USB cable hanging along the wall and plugged in the…
-
Build own iOS app or use iOS shortcuts - use API to allow multi home support
Hi, Has anyone played with the idea of either building their own iOS app or using iOS shortcuts / automation to make API calls? Specifically making an API call to set home or away status based on geolocation. I don’t need any more multi home support than geolocation, everything else is OK in the web interface (if I have…
-
Ventilation remote solution needed
Hi, could you please help me to find the right device to add to my existing tado° set (Wireless temp sensor+wireless receiver+internet bridge) which work perfectly to heat the house, but not to cool it down. I would need to control the existing manual ON/OFF ventilation switch as well, based on the inside temperature in…
-
Silence mode activation for Vaillant (GREE) airco
I have a Vaillant airco, which is acutely a GREE airco. I’m really happy with the Tado remote, but i can’t select silence mode. It is the mode I use the most. Please add this function to the Tado remote
-
Switch unused rooms off
Dear Tado, Please can we have a function in the app to simply switch off the smart valve completely. For example, we have a guest room which needs to be off. If we have guests we can switch it on. Whilst I appreciate I can turn the temp down, it would be better to have it showing as a completely different colour in the…
-
Billing option for gas tanks and oil heating.
Add to the billing option the ability to put in the cost per KWh for the fuel bought.
-
email reminder to turn on the AC when temperature is high
Hello, I'm on holiday away from home when I checked the room temperature at home it was 43°C!! I turned on the AC at once. It would be great if a email reminder could be sent when the temperature starts to rise. I can then switch my AC on when away from home.
-
Wired underfloor control
Hey. After leaving a house with neostats on all electrical and water controlled underfloor heating to a house with radiators, and electric and water based underfloor heating its frustrating that I need two systems/controlers to operate the house. So a thermostat that con control electric underfloor heating through a floor…
-
Away days
I would like the ability to set Frost /away setting for a set number of days.