-
Real window sensors from tado
We would like a real window / door sensor for the "window open function". The current detection of the open windows via the thermostats works so far quite well. However, we have discovered some problems. 1. In some rooms the detection of an open window does not work or does it too late (e.g. bathroom, room with balcony or…
-
tell tado a window is open
The radiator thermostat does not always recognise when a window is open. I would like a way within the app to tell tado this, so that it doesn't try to keep heating the room - I currently have to turn down the tempt setting to around the outside air temp.
-
Spring/Summer and Autumn/Winter settings
Depending on the time of year, I change the temp I want to heat rooms to. So around early April I adjusted things and will do so again in October. It would be useful to have a quicker way to jump between these two settings.
-
Arrange multiple rooms in controllable zones
Ad function to arrange several rooms into ‘zones’, say “top floor” then be able to turn heat ‘on’ or ‘off’
-
Manual Open window detection button
Hi, I really do miss a button to cut off the heat when I open windows. It doesn’t always detect it, and it can be useful in these spring days just to open the windows. If it detects the open window, heat will start automatically after the set time, but that could be useful not to do. Too much work to take each thermostat…
-
Disable TRV "calibration" when offset is changed [required for using external sensor]
As you may have read elsewhere on this forum, myself and other Tado users have been working on ways to make Tado TRVs more usable by using cheaper external sensor to read the actual room temperature and dinamically update the temperature offset of the valves with great results. The only drawback of that is that we have to…
-
Support one decimal place (0.1) for radiator valve temperatures in the Tado app
These devices appear to report their temperature at 1 decimal place of accuracy (I see it via the API in my Home Assistant integration) yet the Tado app only shows their temperature as integers. Can you please change this? I recognise this might be difficult on the device display itself but not in the app. I'd also like to…
-
Smart AC Control - vane and swing control
The tado Smart AC Control is great - except for one thing. My aircon units have the ability to vane both left/right and up/down, and the traditional remote will control these. The AC Control does not, which means that at night, the air blows directly in our face and we cannot direct it to vane or point in a different…
-
Reduce the comfort temperature range to 18-21°c
In the uk a room set for the comfort range of over 20°c can far exceed a comfortable temperature. I would suggest reducing this so my app doesn't think my house is cold all the time
-
Local API
Add an API server to the internet bridge (even if it requires newer, more powerful hardware) that supports controlling devices within the local network. Philips Hue provide a great example of how it can be achieved. My justification is twofold. Firstly, a local API can be accessed in the event of my internet going down.…
-
iPhone/Siri Shortcuts Support
TADO application doesn't appear in Siri/iPhone shortcuts. This application is very powerfull and, though complicated to use, can do much more than IFTTT in the Apple world. Tado must support Siri shortcuts. Homekit is obviously supported and a few (very limited) number of things can be done that way. Please support me.
-
V3+ App Concept
I’ve created a concept of what our household, would like the V3+ app design to look like. Fonts, Icons, Size of Icons, Alignment, Heat Request & Set/Current Temperatures are just examples so may not be correctly placed or accurate. All just for representational purposes. I might add current room humidity to the tiles later…
-
No per month charge for automation (auto-assist) l
I do understand why push-notificatioms are free, but not why auto-assist is not. It seems like an important feature that should be included when Tado sells their products as automation and smart products. Why do I have to pay per month after I have bought the product? It kind of eats into the money (I might have) saved on…
-
Zones
Add the ability to set schedules for zones, keeping the individual devices as rooms, therefore seeing the temp and humidity for each area but controlling as a single schedule. Currently, you can an add multiple devices as a single room, setting a device as the master however you loose the visibility of what the…
-
Notification when device looses connectivity
Please make so the app gives you a notification if one of the devices looses connection.
-
Open window notification after shutoff interval
As it is (if you pay for auto-assist), the system automatically shuts down heating for a pre-configured interval when an open window is detected. I think it would be useful to receive a push notification when that interval has elapsed, in order not to forget to close the window.
-
Android widget with home overview
I would like a widget where to quickly glimpse the home state: Home/Away Temperature/Humidity/Open Window for several (selected) rooms Does anybody else feel this would b e a nice addition?
-
Auto valve calibration
I've occasionally noticed radiators getting warm when they should be off due to the valve needing recalibration. It would be useful if the valves periodically auto callibrated (which would also serve as an anti-seize function) or could auto detect if they temp was unexpectedly rising and trigger a calibration.
-
TADO notifications when the boiler isn't working.
It would be really cool to have an active notification feature for users where tado demands heat and for whatever reason, the house does not get warmer. Notifications should include emails as well as tado badges. use: Unattended Property - know that the frost protection has stopped working - (for whatever reason) I have no…
-
Show the flame icon on the Tado thermostat display when the boiler is running
Very useful to have at a glance if the boiler is running without having access to the boiler display. This is standard in almost all the thermostats.
-
Data export
Please allow download of chart data for each room. This would be most useful as a CSV file. Data available should include date/time, actual room temp, demand temp (what the heating has been set to), humidity, open window detection, etc. I would like to be able to analyse my own data, and be able to make easier comparisons…
-
Zusammengeführt: Smart Ac control 10°C setting
Diese Diskussion wurde zusammengeführt.
-
Expose official API and publish documentation
There are multiple home automation platforms available. Some of them make use of reverse engineered API and the main concern is such access would be blocked by Tado at some point or changed. Dear Tado, be brave! People like open products and your market share and brand rating would definitely grow with such API officially…
-
Outside temperature visible on room screens
As it says above.
-
Manual open window in the app.
I know tado only registers an open window when it detects a huge change in temperature or humidity. But the window in my bedroom and the living room is most of the time open and tado doesn't register. Now the AirComfort gives me an "okay" instead of perfect score because the window didn't open for the past 24 hours…
-
Show humidity as sensor in homekit
It’d be really useful to have the humidity from my tado devices show up as a sensor in homekit. This would allow me to add automations with other devices (eg when humidity goes above a certain level, turn on the dehumidifier)
-
iOS Widget for Tado app.
iOS Widget for Tado app.
-
Status of each thermostat valve position
Build a function into the settings menu where you can see the status of each thermostat, if the valve is open and how open it is. It would be nice, when you are troubleshooting.
-
Individual Geofence Option
Hi. Not sure if this has been mentioned before, but would be great if you could set-up individual Geofencing capability for each individual Smart Radiator Thermostat. To explain, I am often away from home for several days at a time for work and would like to be able to automatically detect this and shut off the Radiator…
-
Modify Limits of Room Temperature Control
Is it possible to modify the upper limit of the Heating Temperature in the Smart Thermostat (it is currently restricted to 25 degrees Centigrade)?