-
Radiatoren zonder thermostaatkraan worden heet
Ik heb mijn Honeywell draadloze thermostaat vervangen door een Tado bedrade versie plus 6 slimme knoppen op een aantal plaatsen. Thermostaat aangesloten als OpenTherm (op zelfde aansluiting als de Honeywell zat). Het thermostaatmenu ingesteld volgens 5. Configuratie: OpenTherm van de installatiehandleiding (dus inclusief…
-
Trouble connecting new Tado Wireless receiver to new boiler.
I've had to get a new boiler - Vallant ecoFIT pure 825-835. The existing wireless receiver did'nt seem to be working, so decided to get a Tado wireless kit. The problem is that the heating engineer can work out how to wire the Tado unit in toe boiler PCB. I've I have looked on line and cannot find anything similar. Where…
-
Control Fan speed with Tado AC?
Hi All I am considering replacing my existing Sensibo units with Tado AC units instead. I have Tado TRV and temperature sensors in every room anyway so one less app on my phone seems like a good idea. One review I read said that Tado just turns on the AC at full blast and then turns it off when the temperature is reached.…
-
Ideal vogue max boiler ignoring request for heating
We have had a new central heating system and boiler put in - a system boiler. I have installed the wireless tado, extension etc according to the instructions. The hot water works fine but the heating will not work. The thermostat calls for heat, the programmer’s light comes on asking the boiler for heat but then nothing,…
-
One Smart Radiator has Intermittent No Remote Access
Hi, I have been happily using my Smart Thermostat and five Smart Radiator Thermostats for a while. During the summer I have had to relocate my Router and as such the location of my Internet Bridge has changed too. Now that the nights have got colder and we have started using the heating again we have noticed a problem with…
-
Why radiators not heating up
My tado app is set to turn radiator on when temperature is less than it should be but the radiators are not heating up in the morning, but does work later on in the day. I don’t understand why this would be, is there some sort of internal clock that needs resetting. My system consists of wireless thermostat, extension kit…
-
TRV not requesting thermostat to be on
I have the Tado thermostat and I noticed that the smart valves turn on but the thermostat is still off due to the schedule. I thought the TRVs could turn the thermostat on to heat up just that room.
-
How to use Tado with HomeKit.
When I first bought Tado, a big feature that appealed to me was the ability to connect to HomeKit. I have done that and all my devices appear in HomeKit but I’m not sure I’m using it to its full potential because I’m not sure what its full potential is.. I know I can ask Siri to adjust a temperature in a room but could I…
-
using multiple Tado wireless Temperature sensors to control a SINGLE Tado radiator valve
Hi, Is it possible to have multiple Tado wireless Temperature SENSORS to control the SAME single Tado Smart radiator valve independently ? so they could each independently request that Tado Smart radiator valve to open or close. Thanks
-
Wiring of my wireless receiver
Replacing an old apt pin clock has to love and neutral wires. Unit is turning on ok with supply wire connected and neutral but second live is not doing anything I have tried it in the com, NC and no but isn't doing anything the boiler is not coming on. Anyone have any ideas befor I ring an electrician
-
If I have smart TRVs on every radiator and none are calling for heat, will Tado turn the boiler off?
As per title. If the heating is meant to be on, but all the smart TRVs are closed because none are calling for heat, will Tado turn the boiler off until one or more TRVs calls for heat again?
-
How long does pairing take … it’s been an our now and it’s still blinking ?
Help … how long does pairing take .. after an hour the light is still blinking
-
Tado kit app control via 2 phones
Hi all, can my wife install the app on her mobile as well so she controls the heat if I'm away?
-
Taco slim verwarmen
Ik had verwacht dat de Tado als ik het om 08:00 p 22 gr. Wil hebben, zelf zou zorgen dat de kachel eerder aanslaat. Zodat om 08:00 de gewenste temperatuur bereikt is. @tado, is dat iets waar jullie aan werken?
-
home_id to work properly with Home Assistant
I am very satisfied with Tado in combination with Home Assistant. To let Tado work properly I have to enter my home_id. I can't just figure out where to find it. Who can help me find my home_id. I have a Tado Smart Thermostat V3+.
-
Temperatuur hoger dan ingesteld schema
Mijn slimme schema staat ingesteld op 19 graden, echter, geeft zowel de app als thermostaat aan dat het inmiddels 19.4 graden is. Waarom wordt er kennelijk doorverwarmd wanneer de gewenste temperatuur is bereikt? Ik ken dit echt niet van mijn oude, gewone thermostaat, die altijd constant op de ingestelde temperatuur bleef,…
-
Set all rooms to a temperature
I’ve got one tado thermostat in my lounge and tado TRVs on my radiators. If it’s a cold (or warm) day and I need to change the temperature in all the rooms, I currently use the app and click the individual rooms one by one and set the required temperature. Is there a way to set all the rooms with one click instead of doing…
-
Zone Setup advice
Good Morning, I am looking for some advice on my setup and if the changes I am planning will actually work! Current Setup I have a single zone central heating system that has 1 x wired Smart Thermostat. Downstairs I do NOT have any Smart Radiator Valves attached to any of the downstairs radiators, just normal TRV's and I…
-
How many devices can call for heat with multiple zones
Hi I had thought that there was a maximum of 10 devices that could call for heat in the whole house, but this page suggests that it is actually 10 devices per zone controller. https://support.tado.com/en/articles/4689126-how-does-tado-control-heating-zones-how-can-i-change-the-zone-controller-of-a-room My setup is working…
-
Latest version of firmware?
Following discussion about battery life & possible link with s/w, what is the latest firmware issued by TADO? All my units are showing v. 54.20 as of today? How does one install a later version if available? GB
-
Control max temperature/valve opening of Smart Radiator
I've installed smart radiator valves throughout our entire house (7 in total). We have three radiators in the living room. One of those radiators is behind the couch. Our child likes to play on the couch and touch the radiator (she also likes to turn the valve knob, but we've enabled child lock to solve that problem, for…
-
Hot water issues after trv install
I have a tado system with an extension for my hot water which is in a cylinder. Had it a few years and all works fine. I have hot water on for 40mins a day and that’s enough to keep it hot. The extension is linked to the tado thermostat which controls my upstairs system. Last week I purchased a load of tado TRVs and since…
-
Three channel hack?
Hi I have a question on whether I can create a hack to replicate a three channel set up. A long pre-amble to the proposed hack at the end which I am looking to get feedback on: SET UP BEFORE INSTALLING TADO: I have two zone heating and one hot water. The two zones were controlled by 2 controllers as follows: a. CH1 -…
-
Has anyone replaced a Siemens RDE 10.1DHW with a Tado Wired Smart Thermostat?
Good day all, I have found the instructions on how to replace a Siemens RDE 10.1 with a Wired Smart Thermostat. It's actually quite simple transferring the cables Q12 to NC, Q14 to NO, and Q11 to COM according to Tado's instructions: Siemens RDE10.1 Tado Wired Smart Thermostat My existing thermostat is a Siemens RDE…
-
Will Tado work with my multi zone Worcest Bosch Combi Boiler set up, including EMS modulation?
I have a Worcester Bosch Greenstar CDi Compact 32, which I believe uses the EMS Bus language, so I've been looking for a Smart Thermostat that can properly modulate my combi boiler. I've heard the Tado can do EMS control. But since I have a multi zone set up (upstairs and downstairs zones), I'd like to confirm that it'd…
-
Connect Tado to underfloor heating pump using wireless Shelly relay?
To have Tado control my underfloor heating, I need to create a wired connection from the Tado Smart Thermostat to my underfloor heating pump. An Extensionkit will control the boiler. To reach the underfloor heating pump from the living room with a wire is difficult. For other smart home applications I use the Shelly Wifi…
-
USB wire
Hi there, The USB cable to add to the power adapter is very short. What type of cable is it so I can purchase a longer one?
-
russianbrides com reviews
We are in a generation where people are inclined more towards a relationship. But sometimes, finding the right partner seems to be a difficult task, and people end up with disappointment. For more information visit: russianbrides com reviews
-
Wireless Receiver question
I want to replace the timer on a Worcester Bosch combi-boiler. The existing one is a wired electronic timer, slightly external to the boiler. So I have a wire to switch the hot water on & a wire to switch the heating on. Both temperatures are controlled by manual thermostat knobs on the front of the boiler. Can I use the…
-
Bridge won't show up in Homekit
Hi All, I had everything set-up nicely in Homekit but when I had to replace a defective TRV for the life of me I couldn't get Homekit to forget that the old one ever existed. So I deleted the Tado bridge in Homekit and tried to re-add it. Hours later I'm still unable to add it. I can scan the Homekit code in the Home app,…