-
Adding a Tado smart TRV
I was a fairly early adopter of Tado and system probably about 5 years old now. It works great but I am getting a new boiler soon and was thinking of taking the opportunity to control my study separately to the rest of the house as it gets very hot in the winter if the sun comes out. It has a conventional thermostatic…
-
Why has auto disappeared from my app?
Just ‘Home’ or ‘Away’ now showing. Thanks
-
Does V3+ include Auto Assist?
That was my understanding when I bought my V3+ starter kit, but Auto Assist seems to be disabled. Is that OK (my misunderstanding) or is there some kind of problem?
-
Care & Protect boiler cover
My boiler cover is expiring, but it isn't clear to me whether tado's "Care & Protect" is in any way similar? The support article about it (https://support.tado.com/en/articles/4467468-what-is-care-protect) mentions services such as "book a repair" and "book a boiler service" but does not tell me anything about what happens…
-
[Feedback Request] Improvements to the manual control
Our design team is looking into improving the manual mode in the tado app. We are currently investigating 2 different design directions and would be happy to get any feedback. Please keep in mind that these are all mock ups, and nothing is final design yet. Please keep in mind that we might decide to go in a different…
-
Wireless connection to boiler
I have a newly installed wireless kit which was working however now the thermostat is not firing the central heating. I've reset all devices and they're all showing as connected but I just can't get the system to start. Any ideas? Thanks
-
Tado Starter Kit on special offer
Tado Smart Thermostat Starter Kit V3+ with Hot Water Control - DIY is currently only £126.50 at Amazon. Likely to be at this low price for a VERY short time.
-
Tado's Wireless thermostat Vs Wired Thermostat
Hi All Can the standard thermostat provided with the V3 starter kit (including hot water tank wireless receiver) be hardwired? It must be wireless and talk to the receiver correct? But does it also have hardwire contacts? As a stand alone product what is this thermostat called (without the start kits bits)? And vise versa.…
-
Can't open App
Hi, Is anyone experiencing issues with the App? I've not been able to access it since last night. All of my internet is working fine
-
Two zone (UFH + radiators) calling for heat issue + pump wiring
Hi, I have UFH on the main floor and radiators on the first floor. I wired the wireless receiver to the boiler and connected a smart thermostat wireless to this wireless receiver. This setup controls the main floor. ☝️Is it possible to wire the UFH pump with the wireless receiver in order to turn the pump on/off when the…
-
Honeywell ST699 with Drayton digistat SCR
Above is my present heating system, connected to an outside oil fired boiler. I've been trying to install the tado Smart Thermostat V3. i have come unstuck on the extension kit. I cannot work out what I am supposed to do, and the 'technical support,' is not helpful. Has anyone got experience of this system? And if not,…
-
Connecting Tado to Glow Worm Ultracom CXI 30 Combination boiler.
I have purchased the v3 smart wired thermostat kit to replace a Boss Therm BR1 receiver. There are four wires going into the BR1 in the existing setup: Live/Neutral and then L1 and LX - there is also an empt L2. I’ve tried to connect to NO and COM then park the Live and Neutral. It boiler in always on more as per manual…
-
central heating is on while all rooms turned off
Hi, The new app has the "turn off all rooms" button. As spring have started here and we had some warmer days I used this feature last week, I turned off all rooms. And all rooms staid unheated but ... I have two radiators in the kitchens utility area that don't have Tado thermostat valves on them and those got VERY hot.…
-
New installation - don't know what I need
Hi Muppet I may be but it's just not clear what I need. New installation of Worcester Bosch boiler, unvented hot water cylinder, one main wet UFH zone in kitchen / living room, one bedroom with 2 rads, one bathroom with 1 rad. No existing control infrastructure. All new kit. Please help. What's the best set up? Thanks
-
How to prevent dangerous situation when Tado devices disconnect when heating is turned on?
During my absence, I was warned by my neighbor about a very high temperature in my apartment due to constantly burning central heating. Because I was not at home any manual action was not possible. I asked my neighbor to turn off the power to the central heating. Tado support reports me that my Tado devices got…
-
Before I rip it all out....
I see loads of people on here with same problem ie system doesnt not call for heat. App says everything is connected and fine. Boiler is fine. I have metered the relay and its 100% the tado not throwing its relay. One thing also others have not mentioned is it does not trigger the fault detection either on the app. One…
-
Is the V3 Thermostat an upgrade on the original
I bought the Smart Thermostat Starter Kit back in 2015. Is the latest V3 version an improvement on the original? So is it worth while changing the thermostat to the latest version....does it do anything better? Thanks for your help.
-
Tado keeps heating the room
Good afternoon everybody, I used to have a Honeywell manual thermostat and setting the temperature worked perfectly. Now I had a company install a Tado heating system and since then I have experienced problems. The heating system does not stop warming up the room. In the living room I have 4 heating systems without an…
-
How do I get my radiator thermostats to start the boiler?
Hi there, Sorry I know this has been discussed before but still need some help. I currently have a V3+ smart thermostat wired where my previous thermostat was. I also have an extension kit for the hot water. I have numerous radiator thermostats as well. All of these are paired to the bridge and I’ve created multiple zones.…
-
Can I control two radiator thermostat with a smart thermostat?
I have an open room with two radiators - each with a radiator thermostat. I want to be able to use a smart thermostat so I only have to control the temperature in the entire room through one device. Is this possible?
-
Smart Thermostat Permanently calling for heat
Hi everyone, This is slightly different from everyone else's fault regarding calling for heat when not required, so thought I better to start a new thread. Like a lot of you, I have heating coming on all night, even though every Radiator Thermostat and the Smart Thermostat are well below the temperature. I checked and…
-
Underfloor heating
Hi, About to install wet underfloor heating in a new extension and put engineered wooden boards on top. Have kitted out my house with Tado throughout so would obviously want the u/f heating also to be controlled via Tado. Tado says this can be done by creating a new zone with a zone valve and having that controlled by a…
-
HomeKit Features missing?
Hey, am I missing something or can Tado only control temp and on/off in HomeKit? I see humidity is hidden in the settings tab but no way to control fan speed or the dry setting of my aircon… am I missing something or is it just not supported?
-
Global On/Off feature disappears randomly
The global on/off feature that was added recently seems to randomly appear and disappear for me on the Android app. Its becoming quite annoying as I can't turn off/on heating until the option randomly appears again. Anyone know why it does this? I get the impression it's being controlled by Tado servers and if the app…
-
Two heating scenarios - how smart Tado° is?
Would Tado° take a different approach to the way it heats your house in below two cases (without Early Start option enabled)? Outside temp: 3 °C, Partly Cloudy Outside temp: -3 °C , Snow
-
Radiator Thermostat not working out of the box!
Hi - i have raised a ticket to Tado but just wondered if anyone can help? Just bought 6 radiator TRVs and after installing 3 without issues the fourth appears to be faulty. After removing the battery tag the unit does not boot up or show any lights. I switched the batteries and they arent the issue - the unit is. Anyone…
-
Replace Honeywell TH8200G1004 with Tado
Hello all I have just bought the Tado kit and I am wondering how I can do the wiring to replace the existing thermostat. My heating is from a public heating system provided by the city, there is no boiler in the house. Attached is the current wiring, it is quite simple but I am not sure how to proceed from here, would not…
-
Wireless Temperature Sensor: asking questions, seeking opinions
Well, I must have missed the memo because I completely missed the arrival of the Wireless Temperature Sensor. This seems to be the missing piece of kit that I have be looking for, so I have some questions and I seek your opinions. I currently have a single Smart Thermostat, the only control I have otherwise is TRVs. For…
-
What to buy: Separate hot water timer, 2 zone/2 thermostats heating
Dear all, I have hot water running from a timer (Danfoss TS715Si). Then in one level of the house, a switched/wired thermostat (Danfoss TP5000Si). And in a second level of the house, a second switched/wired thermostat (also Danfoss TP5000Si). What should I buy? Smart Thermostat kit with Hot Water. Is the thermostat wired?…
-
Extension kit compatible with worcester bosch 30i digital bus
I have purchased a tado wireless thermostat starter kit. I want to use the digital bus but the wireless receiver does not have the digital terminals. Will an extension kit v3p-ek01-tc-ml-01 contain the digital bus terminals?. Will I be able to use this extension kit rather than the wireless receiver for gas modulation with…