-
Best new heat only boiler compatible with Tado?
I was a fairly early adopter of Tado and heave been very happy with it. I currently have a wired thermostat and extension kit to control room temp and hot water on a 35 year old Potterton Netaheat conventional boiler. I am planning on changing this in the summer for a new heat only conventional boiler. I was keen on Ideal…
-
Tado changes the settings of my central heating boiler!
I had been looking for the possibility for some time to lower the flow temperature of my central heating boiler, because I only have underfloor heating that should not be warmer than 50 °. But if I try to lower the temperature, the Tado thermostat simply sets it back to 85 °. When I unplug the thermostat, the temperature…
-
Does having two Zone Controllers increase the rooms allowed to more than 10?
Hi, I'm using our Extension Kit as our Zone Controller. I'm not using my Smart Thermostat at all. If I wire in the Smart Thermostat (replacing the Honeywell non-smart thermostat mounted on the wall) would the Smart Thermostat become a second Zone Controller and if so, could I then allocate the current Tado TRV's that are…
-
App repeatedly asking for location permissions when it has them
I'm having issues with version 6.4.2, it repeatedly asks on the lock screen for location permissions. Location permissions are definitely enabled, and when I unlock the phone, the notification doesn't appear on the notification bar. Very strange. On OnePlus 8, Oxygen OS 11.0.4.4.
-
Connection of Tado Bridge to devices through thick walls
I live in an old converted farmhouse with thick (800mm) stone walls. I doubt that I will be able to link all my radiator values to the Internet Bridge. Is it possible to have more than one Internet Bridge within the house linked to the same (mesh) wifi?
-
Missing installation guide for R+F Thermostat "unknown model name"
Hi everyone, I have recently received my tado kits for my new appartment and am excited to set them up. Unfortunately, I am stuck in the installation process, since no guide is available for the current thermostats installed, even though I found them in the app: I sent the support request twice but have not heard back yet.…
-
missing wire
Hello everyone, I hope someone can help me, the wiring on my Honeywell ST9400c programmer as from left to right. earth wire, next blue neutral wire, next brown live, next number 1 white, number 2 as no wires. number 3 black, and number 4 brown. The problem I have the Tado diagram has not shown where to connect the earth,…
-
central heating not working
Hi everyone wired everything correctly with help from GrillCheese2, l though it was fine did the test for the hot water boiler fired up fine did the test for the central heating boiler did not fire. Funny l had the central heating set to come on at 4 o'clock and the central heating light came on the receiver. I recheck the…
-
Can a radiator thermostat be set hotter than the main thermostat?
If a radiator thermostat is set higher than the main thermostat, what happens? Nothing, only the main thermostat can call for heat so the radiator thermostat will open but with no flow the room will not get hotter. The radiator thermostat will inform the main thermostat it needs heat. The main thermostat will call for heat…
-
TRV reverts to Frost Protection
I only have two Tado TRVs, one works fine but the other keeps ignoring the schedule and reverting to frost protection, I can't figure out why. Any ideas?
-
Problem with Tado extension kit
Hi, I’ve recently installed a new glow worm e series boiler. I’ve had tado work well for the last few years on my previous boiler.... Before I tied it into the new boiler ( seems pretty straightforward), i wanted to confirm the two outputs from the extension kit: CH ON and HW ON. I’m switching live to the boiler to control…
-
Unassigned zone controller to wired smart thermostat
I have installed several wired smart thermostats. Most installations went well, however 2 of them do not have zone controllers assigned to them - the others all do. I followed the same installation procedure for all of them. Has anyone come across this issue, and if so, how did you fix it?
-
Infinite
Is there a way to change an automatic selection of infinite ♾ on temp increases or decreases from the Tado Thermostat or Apple Home App. I would like a time limit on the increases for example which can be set in the Tado app. Driving me crazy forgetting to turn the heating down again.
-
Help! Stuck mid-install!!!
Hi and Help! Installing v3+ wireless starter kit. I have replaced the wired thermo as directed with bridging no problem. I have now got the casing off the Horstman 2 channel H21 XL and reviewed the wiring. The Tado installation guidelines ask if there is 0 / 1 / 2 bridges in place - but I have 3! The bridges are on…
-
Do I need to get the system configured?
My geofencing is telling me that there is a window open every time we open the bedroom door, do we need to get system reconfigured to stop this?
-
Why is my thermostat don’t let water go in to radiator ?
Setting up the system!! The bridge and wireless receiver I believe is working fine! Question is when I put the thermostat on to the radiator!i follow the step on app!! It show everything ok! Try change the temperature from off to 25°, the app didn’t show is heating and the pipe is not hot!no hot water is go in to the…
-
How to remove a smart radiator from Homekit?
The SmartRadiator is still here, but disconnected and off. From the Tado app its removed. In Homekit it still shows up ‘inactive’. How to remove?
-
Feature request - Notification when heat is turned back on automaticly
Hi. There is the feature where you'll get a notification if there's an open window and then you can click the "turn of heat", the heat stays of for a period of time and then on. My request is a feature that makes it possible to get a notification when the heat then turns on again - so that I know to close windows/the heat…
-
TRV Use
I have just added a TRV to my Tado system with a master room thermostat in another room. To date the master thermostat has controlled the heating very well. If the temperature falls below the set temperature in the room with the TRV the boiler is fired up heating the whole house even though the the rest the house is at or…
-
Other colors available?
Are you planning to launch your products in other colors than white? I am a tado user for years now and love the whole set up. Am looking to upgrade my radiators to a more industrial dark / metal look soon. The white radiator valves will not look good on them... :( would be great if some basic colors were available so that…
-
Can we have a on off button in the app to turn on and off the heating
Can we have a on off button in the app to turn on and off heating for entire house
-
My Tado is set to 21 degrees, room is 25 degrees, radiator switches on
Hi there! I seem to be having a problem in one of my rooms. We have one room with a lot of windows, so this room gets very hot in the afternoon. The radiator is set to 21 degrees during the day, because we use that space as an office. Now it happened twice that the room temperature is 23-25 degrees, and yet the tado says…
-
Temp overshoot. Stat not switching off boiler
Hi folks. So I have two zones controlled by two wired stats. No TRVs yet. As I sit here now I have this zone set in the schedule to 20 degrees but the room is now showing 2.6 on the app and wired stat. The problem is although temp has been reached the boiler is still going and pump still firing. Shouldn't the stat stop the…
-
Help! Stuck currently mid install!
Hi and Help! Installing v3+ wireless starter kit. I have replaced the wired thermo as directed with bridging no problem. I have now got the casing off the Horstman 2 channel H21 XL and reviewed the wiring. The Tado installation guidelines ask if there is 0 / 1 / 2 bridges in place - but I have 3! The bridges are on…
-
Smart schedule
Hi, just had this installed on my new boiler and cannot work out how on earth the smart schedule works. I would like the boiler to start at 07.00am and turn off at 08.30am on the same day then turn on at 18.00 and off at 21.30. We want the house to be heated to 18c. When i try to set these times in the Smart schedule it's…
-
Help Please Pretty Please! having a nightmare wiring underfloor heating to Tado
Really hope someone has experience with the same problem I have a Worcester Boiler providing heat for upstairs Rads which will be controlled by Tado Wireless Thermostat + extension kit wired to the boiler (not sure if this is correct or does it need to be wired to the wiring center) and Tado TRV's on every radiator and a…
-
Just spent ages typing a suggestion
I've just spent ages typing a suggestion. It said it posted, but there's nothing there.
-
Best new heat only boiler compatible with Tado?
I was a fairly early adopter of Tado and heave been very happy with it. I currently have a wired thermostat and extension kit to control room temp and hot water on a 35 year old Potterton Netaheat conventional boiler. I am planning on changing this in the summer for a new heat only conventional boiler. I was keen on Ideal…
-
What happens to the existing heating programmer?
I'm thinking of upgrading my central heating controls, the main reason is to replace the wired thermostat with a wireless one in a more suitable location. The system has a ~5yr old Worcester boiler with hot water tank controlled via a mid-position valve. The boiler is in the garage, the pump and midposition valve are in an…
-
control smart radiator thermostat by wired smart thermostat
Hello, Is it possible to control smart radiator thermostat by wired smart thermostat (can it act as temperature sensor)? Regards.