-
Can I I time geofence to specific people?
We are three roomies living together and each of us have access and each our own rooms Is it possible for TADO to automatically turn down heat when a person attached to a room leaves the house and ventures outside the zone?
-
Energy savings report
How often is it released? Is it part of the TADO subscription? Is it well calibrated from the start or will it take some months before it learns about my home?
-
How to split 3 "dummy zones" into real rooms?
I am asking your help as tado support has not been able to give me a clarifying answer. I have 3 zones in the house: where I live, where I work and an archive. Each zone, but the latest, is composed by different rooms and has a motorised valve to control zone heating manifold. My current configuration is one tado…
-
TRV's not behaving properly
Hi, Got an issue I think. I have the tado TRV's on all of my rads. I have smart scheduling, so as an example at 1.30am last night the schedule settings would have been: Spare room - TRV set to 18c, actual room temp 21c Child room 1 - TRV set to 20c, actual room temp 20c Child room 2 - TRV set to 20c, actual room temp 20c…
-
Tado Bridge Has Very Poor Range?
I have the Apple Home enabled bridge, working well with 6 Smart TRVs... when I try to add a 7th, in a room a little further away - its's a maximum of 20ft from the bridge - it will not connect. This leaves me with 4 Smart TRVs that I cannot configure. Moving the bridge closer, obvious thought, stops 2 of the working 6 TRVs…
-
Underfloor heating - can I control multiple zones with 1 thermostat?
Hi everyone! Apologies if that has been answered already... We are refurbishing the entire ground floor and putting underfloor heating. There will be a total of 7 zones (each zone is a room) I was wondering if with Tado I could group some of the zones and allocate to a specific thermostat? For example, I want Thermostat 1…
-
Re: Home mode "on demand"
-
Devices won’t show up on HomeKit
Hello all, i have two smart radiators that are connected to my bridge. I can see all the devices and configure them using the tado app. Everything looks fine except that they won’t show on my iPhone or iPad home app. I’m trying to add the bridge on my home app but it keeps searching forever and will never find it. any…
-
Is possible to use TRV only in some rooms
Dear all, I am not a TADO customer, at least for now because I am in the process of refurbishing my new flat. But I am strongly considering to buy TADO smart meter. My main concern, justified by several posts on this brilliant forum, is the level of noise produced by TRVs. My daughter is a very bad sleeper and at the…
-
Manual TRV use over-rides smart scheduliing
Hello, I have set up some of my rooms with 1hour internal slots for the entire 24hr period. My understanding on the system was that if I enter the room and manually changed the TRV to heat that room (as a guest in the house, so does not have the app for remote access control), it would only do so for the remainiing time of…
-
In Away mode does Tado turn of radiators completely or only to the minimum level of 5 degrees?
What if I'm on holiday for a week, what's the best setting in order to save energy with the away setting?
-
GeoFencing using app
Hi, I have noticed that the Geo fencing only seems to stop any scheduled heating and that if I have just turned on a radiator using the app to say 21C (not scheduled) when I leave the home and the app switches to away mode the scheduled heating radiators show as green so not heating but any that we’re turned on to heat up…
-
Whole House Control
Not sure if this is possible but... I currently have: 1 x Extension Kit 1 x Internet Bridge 1 x Smart Thermostat 10 x TRVs I'm thinking about getting TRVs for the remaining 4 Rads so ALL the Rads in the house have Tado TRVs. Was thinking, is there a way to configure Tado to turn the heating on through the Extension kit if…
-
Heating just gone "no remote access"
Been using Tado for a couple of months now. Have recently swapped out the Internet Bridge via support, as the original one kept dropping off with the cloud LED flashing. The new one has been working fine for a few days, but now both the smart thermostat and extension have gone "no remote access" despite the Internet Bridge…
-
In Away mode does Tado turn of radiators completely or only to the minimum level of 5 degrees?
What if I'm on holiday for a week, what's the best setting in order to save energy with the away setting?
-
To get customised installation instructions, **please reply to this email with the following informa
Did anyone experience this and how long before a reply is received?
-
Teste Intelligenti Tado° - offset di temperatura dinamico o doppio (calorifero acceso spento)
-
Moving thermostat head unit to bedroom
Just installed 4 new valves in my living room and kitchen, which seem to be working to keep my living room warmer than the kitchen. I have another box of 4 and the plan was to install them in the bedrooms, but hearing them in action and reading the comments here I'm hesitant to install in my sleeping space. Currently the…
-
No tab to control my hot water
I have followed the instructions precisely for installing the extension kit and the room thermostat but I cannot control my hot water only the heating which works fine.
-
can i buy a thermostat v 3 in uk and use it in denmark with out problem ??
can i buy a thermostat v 3 in uk and use it in denmark with out problem ?? Kenneth
-
Smart Thermostat in Bedroom -Audible Click
Happy ;New Year all! Currently considering Tado. I have a two zone system with a a wired thermostat in the lounge and bedroom. I also have a separate timer for the boiler. Both thermostats have a an audible click when switching on and off. Not a problem in the lounge but the one in the bedroom is a bit annoying, is there a…
-
V3/v3+ app
I bought a v3 starter kit (bridge and two trvs) which I've installed so I presume I have the v3 app, how do I check? I've just bought a smart thermostat and extension kit but these are v3+. Will it automatically upgrade my app or can I add them to my existing v3 setup?
-
Geofencing problem
I am the v3 app which I paid for . Taco is consistently saying I am away and so no heating until I overuse it . Does not pick up my location . Have checked all the phone settings and emailed tado who have sent it to their technical department . No they are Not even answering my emails . Am very dissaponted with them and am…
-
Redo the thermostat setup
Hi, I've bought an Tado Smart Thermostat but when adding the device I have chosen the wrong settings for my boiler. Does anyone know how I can redo the setup? I can't remove the device to start over again. Thanks in advance, Regards /me
-
Several Rooms in One
Hi all. Been reading the forum about the 10 room limit. Whilst I’m another unhappy customer - I’m not going to ask the question again. What I do want to know though if people do know - if I group a number of rooms together - will the radiators turn on/off independently? I ask as the only rooms where we have more than one…
-
thermostatic radiator valves are too noisy
-
How do you handle these scenarios?
I have 3 rooms configured in tado, and i was wondering how you handle managing the below scenarios - maybe you have better solutions than mine! 1) Manually turn off heating for the whole house - for example I sometimes fire up the fireplace and would like to shutdown heating. My Solution: IFTTT button to set to off and…
-
Can't add Smart AC Control to Apple Homekit
Hi, I can‘t add the Smart AC control to Apple Homekit. It’s connected to the internet and the tado app is working perfectly, but every time when I try to add it to Homekit I get the message: ‘’Couldn’t add Accessory. This accessory isn’t compatible with your Wi-Fi router’’ Please help.
-
Humidity sensor reading
One of my STRV,s (v3+) is showing too low humidity (30%) I’m pretty sure this isn’t the case as we are in an old house (solid wall construction) and expect it too high not low. Has anyone else had issues with the humidity readings?
-
How easy is it to set away/home compared to paying the subscription?
Hello, If I buy tado v3+ but do not take out the subscription, how much 'effort' is required in the app to turn the heating on/off manually as opposed to auto. All the backlash I'm reading seems to suggest it's a big deal, so is it more than a case of, 1) get a notification, 2) click on it to open the app, 3) click a…