-
Copying Schedules from room to room, or grouping rooms
I have recently got Tado, now with 11 rad thermostats over 10 rooms. Smart schedules are great, (I have not tried Geo yet) but doing the same schedule set-up over and over is painful. I'd like to set a schedule for all bedrooms for example (we all get up at the same time in the family), which would make it simpler to set…
-
Smart schedule
Hi. Since changing mobile phone my smart schedule is not working? All looks the same, app not optimised, can switch using manual overrides but not working automatically?
-
Operation/algorithm/
I’ve attempted for some time to get to grips with the tado system, I can make it work reasonably well and find the geofencing works well, however, I have a number of concerns with regard to how the system actually works and reports via the app; Air Comfort - The app reports temp and humidity based upon the calculated temp…
-
Heating permanently on
Came back home yesterday to find the house baking hot. Temperature showing as 24.8 degrees even though TADO target temp set at 19.5. Geolocation set. So that wasn’t the issue. Once I’d finally worked out how to turn the heating off (why SOOoooo many app redesigns? It’s simply not intuitive.) I did both that and then the…
-
Boiler external temperature sensor
Hi guys, My Buderus modulating boiler has the option of connecting an external temperature sensor and adjusting the temperature of the heating circuit based on that (e. g. 80° at -20° ouside vs 30° at +20° outside). My question is: would doing this benefit/complement the tado algorithms or on the contrary? Hope someone can…
-
Why does my SRT show too high temp?
The SRT says 23 degrees celcius, however it’s not more than 15-16 degrees in the room. I guess it’s because the censor is too close to the radiator. But how do you adjust to this?
-
Will Radiator Thermostats work with third party thermostats to measure room temperature?
Hi, as many others, I have a problem with measuring the room temperature. As soon as the radiator heats up, the thermostat, that is placed basically over the radiator, immediately registers a high temperature and closes the valve. Of course off setting the measured temperature will just mess it up even more. I know I could…
-
Heating only turning on at night
My tado only works at 10pm at night. The boiler is constantly on too. Any ideas?
-
Pairing to be activated every 12h?
I get disconnected on mythe app with the server symbol next to my Thermostat icon. Bridge is fine, but I have to click “activate the pairing“ as it’s only active for “12 hours”. Why can’t you just have it on all the time?
-
Powering the smart thermostat
Hi, My proposed installation is a smart thermostat and the wireless extension kit. The thermostat will not be hard wired to the boiler. Is it possible in this configuration the thermostat can still be powered from a permanent power source as opposed to the 3 x AAA batteries? An opportunity has arisen where I may be able to…
-
Smart Thermostat Installation Frustration
Dear Tado - I'm hoping someone can re-start my online installation process ASAP. Support ticket number 1049417. I am part through my installation. I have the bridge and paired and the thermostat connected. However, installation has been stopped with a message and support ticket saying "We are currently checking your…
-
Is there a thermostat with external sensor so i can controle the water temp, of my Floor heating ?
I see only room radiator thermostat
-
How to set automation for bathroom with underfloor heating and radiator each controlled by Tado
So I got Tado units everywhere and now I have a problem with setting the automation in my bathroom where I got underfloor heating controlled by tado smart thermostat and and radiator controlled by smart radiator thermostate. The task is quite complicated because my electric underfloor heating system is controlled by Tado…
-
Extension Kit after a Power Cut. Urgent.
Could anybody tell me what happens to/with an Extension Kit after a Power Cut, please. The scenario and solution if possible. Please...
-
Time to upgrade the app?
This is a question for the community rather than Tado. I have held off upgrading to the V3+ app as initial reports were that it was not much of an upgrade and even a downgrade for some features (e.g. loss of the 3 bar heating symbol, inability to revert to schedule from manual control etc). Can anyone advise on whether…
-
Extension box in existing setup
I have my thermostat wired to my heating system, but now want to change that to wireless via an extension box. Do I need to remove the thermostat from my setup and do a new thermostat installation and then choose the extension box connection? After installing the extension box I assume the NO and NC switches will work on…
-
Loud TVR valves
When my radiator switch on I hear the noise and wakes us up if we are in bed is there a way of stopping this?
-
My tado smart termostat seems have problem
Hello. I'am have in home working configuration from 1 bridge and 2 smart radiator termostats and all work ok, i'am happy :) Recently i'am buyed from ebay 1 smart termostat to expand system. First i'am selected tado installation help, after i'am go back and selected "already wired" installation and pair finish ok, web…
-
Controlling multiple thermostats
Hi all, I couldn't find this elsewhere so hope its not a duplicate. Basically the home already has 2 zones of heating working off the one combi boiler. One wired thermostat for downstairs and another for the 1st and 3rd floors. So I imagine I'll need 2 tado smart thermostats. I also want to get plenty of smart TRVs for…
-
Tado Smart Thermostat Temp Query
Whilst I am happy with the thermostat and the app and ease of controlling and monitoring the heating, there seems to be a bit of a design floor with the low heating request (heating modulation). When the boiler kicks in it will get up to temperature with medium and high heat requests, this is fine as it will over kick the…
-
The ‘Set to’ temperature in the tado˚ app
New tado˚ user here, so please treat me gently. I have a simple smart thermostat in my lounge. I have Geofencing and Auto Assist on. My Smart Schedule is set for heating to be on from 06:00 to 22:00 with a temperature of 20°C. My Away temperature is set to a minimum of 15°C. 1. Yesterday, I was away overnight. Everything…
-
IFTTT
Does anyone know if we can use the API to write a better IFTTT integration? The existing one seems not to have been developed further for years and is so basic. What I'd like to achieve is triggers when a radiator comes on and off, I could probably achieve that if I could use the current temperature the radiator is set to…
-
Multiple zones and fine tuning rooms
There are two zones in my house ground and first floor. My ground floor is an open space so one thermostat is sufficient. There are 6 heated rooms upstairs in zone 2 with only central heating radiators. I would like to have granular control in the 4 rooms and other 2 rooms set only by zone 2 settings: 1. main bathroom with…
-
2 radiator thermostats 1zone
If I have 2 smart radiator thermostats in the same room which one will control the temperature
-
Smart radiator stuck 'unmounted' despite passing through the calibration stage without error
Hi. I've got a smart TRV that refuses to get past the mounting stage in the install wizard. I can install the TRV itself and it'll successfully go through calibration, ending up with the three squares correctly then moving on to (its default?) 'home' setting of 19°C. The online wizard doesn't acknowledge this has happened…
-
What is the guaranteed lifetime of V3+ ?
The Tado devices are not too cheap. I'd like to know the minimum support time or guaranteed lifetime of the current devices and app version. I understand that Smart Thermostat or TRV can break after and there is a (2 years) warranty. But my question is more about the lifetime of the whole solution at current version. I.e.…
-
Multi Zones
So i have three zones in the house, 1st floor radiators, ground floor radiators and ground floor UFH. The UFH is divided into 5 different zones (they serve different rooms). Will the Tado be able to turn off and on, each zone, but also each loop of the UFH when i need to? I know the nest for example, will turn be able to…
-
Adding an Extension Kit to an existing setup
Hi I have a Tado Smart Thermostat and bridge which work fine with my CH/DW programmer (which is directly wired to the boiler). Today I replaced the programmer (British Gas Model UP2) with an extension kit. I got to a point in the "add device", where I selected extension kit, where the installation stopped and the device…
-
How do i book a fitting of a system i have bought?
How do i book a fitting of a system i have bought? I live in Northampton and i am not happy about fitting this my self as i have damaged one thermostat so far and am not enjoying the fitting experience. Many thanks Paul
-
Extension kit
Ive picked the wrong boiler in the set up so its only showing me the wiring and set up for on off not opentherm is any way start again or reset or do I just need a different wiring diagram