-
Using OpenHab or IFTTT for more control
I testing a Tado radiator thermostat to operate the heating in a secondary home. I need to be able to switch the home between "home" and "away" modes manually. I also need several "home" modes, as I only want to heat bedrooms that are needed. I already discovered that the APP, and the Web service is not suited for what I…
-
What does Auto Assist offer me?
There is an option in the app to pay for something called "auto assist". What does that offer me? The accompanying text is rather vague...
-
Help Centre Chat no longer appears
The chat window which seems to be the only method Tado want us to use to communicate with them no longer appears in any of my browsers when I go to support.tado.com. Is it just me? I have tried signing out, deleting cookies, signing in etc., but nothing appears, even on a new browser. Anyone any ideas what I should do? How…
-
Upgrading from v1->v3 tado
I've had a v1 (Connector kit) tado for a few years now, but it has stopped working - the remote temperature sensor unit has stopped working, and I can't get it going again. Additionally, I wanted to add some tado thermostatic valves, which require a newer version of the tado base unit. Up to now my tado has been…
-
Zone heating activation impossible from any Smart TRV.
Good afternoon all. I am newbie so please apologise my dumb question hereinafter. Just installed Smart Thermostat V3 and 12 SRT V3 as well. Met with most of earlier mentioned issues but I think it is too early for evaluation. One thing however is creating my headache. I do whatever I can with SRT in any zone, but boiler…
-
Installation of smart thermometer and extension kit can get stuck
I have ended up with a thermometer not associated to a room and cannot be associated also can't be removed from the account and re-added , so stuck until support reply Installation of smart thermometer and extension kit wired into a tradition boiler should be trivial I was experimenting replacing my nest kit as I also have…
-
Setup confusion
I came over from a hive combi set up From my understanding your are me to have trv’s on all but one radiator One the hive system I had the main thermostat which schedule with the heat on demand off on trv So the tvr was set to a maximum temp as allocated on each room and only got to that temp then shut off The boiler only…
-
What can i do?
I received a warning during new product registration: "This device is already registered to another home. Please contact us if you want to add this device to your home." what can I do? is there any email to report it?
-
why does my boiler fire up regularly when all controls are off.
My boiler fires up regularly for about 30 seconds to a minute even when the heating and hot water are all switched off.
-
I cannot connect my thermostat to the boiler ?
I am having difficulty connecting my smart thermostat to my boiler the extension kit, internet bridge and stat all seem to be paired but when I alter the temperature on the stat or turn it off, it is not having any effect on the boiler, do you have any suggestions ?
-
Replacing Danfoss 103 programmer
Renewing combi boiler and replacing the old programme...I have the extension box and remote stat...it looks like I have to slightly modify as the back plates are different
-
Room Stat. has a ‘hair trigger’.
Not sure of the correct words for this... My Room Stat. is being too sensitive at measurement. It seems to be accurate to 10th’s of a degree (?). It switches on & off without the Heat being on. Just by (I guess) tiny fluctuations in the room. Any way to adjust this? Thanks.
-
Thermostatic control not working?
Using tado Smart AC v2 Issues that I am currently experiencing (used to work before and now it isnt): Thermostatic control is not working Cannot turn off the AC using android phone Cannot configure to use non-thermostatic control Thanks!
-
One of my thermostats doesn't close.
One of my thermostats doesn't close even if I changed batteries. I even moved it to another heater. No it doesn't close that one. I heard that updates could be pushed to one device specifically. Maybe that helps. The thermostat is on 54.4, unlike the others that are on 54.12. Thanks, Bogdan Talos
-
How to delete my Tado account?
Hello, I opened a Tado account but during the registration I did a stupid typo error in the email address. How can I delete this Tado account and start over again? Thanks
-
Support for Split-Luft/Wasser-Wärmepumpe BWL-1S(B)
Hello I got the Extension Kit and want to check if it is supporting now Split-Luft/Wasser-Wärmepumpe BWL-1S(B) 14/400V? In the passt it didn't support (November 2016) . Hope somebody could let me know if anything did change . Best Regards Michal
-
Can't finish setup Tado AC
Just bought a new Tado AC ,connection to network seems ok but when i am going to choose AC heater brand i am just getting can't connect to server check your internet connection. Connection is fine. Damaged Tado?
-
Working range of the thermostatic head
What is the range of the thermostatic head? There are two in my tado-open or closed. There are three levels in the application, but in fact the thermostats do not respond to the first two heating levels.
-
Bathroom with underfloor heating, wall radiator and heated towel dryer
Hello, I am wondering how can I efficiently manage one bathroom with water underfloor heating with wall thermostat, one wall radiator with thermostat valve and one towel dryer with thermostat valve. What can you advise? Should I buy tado thermostat for wall radiator and floor heating? Just for floor heating? For all?…
-
Advice on set up with underfloor heating/multi zone.
I have underfloor heating downstairs, its a water system and it has been set up possibly in an unusual way. There is no separate control panel for this, it is controlled by the water channel on the central heating programmer. There is a wired thermostat downstairs as well. upstairs are normal radiators and these are…
-
Impossible de faire des pièces ...
-
Re : Impossible de faire des pièces ...
-
Why does my Tado become unavailable via the app for a few hours everyday?
Between the hours of about 3-6am I cannot use the app to change the temperature of both my thermostats. This has been since installation, every single day. The thermostats still work if used manually but not using the app.
-
Do I need to register my purchase.
Do I need to register my purchase of Tado Starter Kit?
-
I have moved in to a house with Tado already set up
Everything is still registered to the previous owner. How do I change this so that i can use the Smart heating thermostat
-
Why does my Tado become unavailable via the app for a few hours everyday?
Between the hours of about 3-6am I cannot use the app to change the temperature of both my thermostats. This has been since installation, every single day. The thermostats still work if used manually but not using the app.
-
On/off regulation?
Is the tado radiator thermostats supposed to be regulated by on/off, instead of PI regulation? To be honest, the noise from full speed flowing water is pretty annoying.
-
On/off regulation?
Is the tado radiator thermostats supposed to be regulated by on/off, instead of PI regulation? To be honest, the noise from full speed flowing water is pretty annoying.
-
Setup confusion
I came over from a hive combi set up From my understanding your are me to have trv’s on all but one radiator One the hive system I had the main thermostat which schedule with the heat on demand off on trv So the tvr was set to a maximum temp as allocated on each room and only got to that temp then shut off The boiler only…
-
How does the Tado software know when everyone of the family has left the house without registering
each individual mobile phone?