-
TRVs - Please help... very embarrassed!
I'm ashamed to say, I attempted to install some TRVs today with very little success (and some flooding). I did not realise that some TRVs were compatible and some were not. I've since learned that my TRVs are not on the compatibility list, and I've no idea what to do. I unscrewed my first TRV and tried to install the Tado…
-
Tado heating
Please can someone please help me I don't know what to do My tado thermostat was playing up saying it was 27 degrees when clearing it isn't I've touched few buttons and have no heating what so ever did it all on app and now hot water option has appeared I don't want that on there I've never had that on there before now…
-
Is Manual Control broken recently?
Hi, I have all my SRTs set to 30 minutes when manually controlled. But recently it doesn't stop after 30 minutes. About 9.20 this morning I set one to 20 manually on the SRT but it was still going until right now. Tado was reporting the room at 20.3 degrees. What is the expected behaviour if the room doesn't reach the…
-
Do I need the Smart Wired Thermostat?
Hi there I have a Tado White Smart TRV Head 4 Pack and Tado V3+ Smart Wired Heating Thermostat Starter Kit I've just fitted the TRVs and I've already got a Honeywell Thermostat, so I wasn't sure if I needed to use the Tado Wired Thermostat at all? The TRVs already have thermostats, so I was a bit confused what I'd need it…
-
Adding hot water and flow control to a Glow Worm Ultracom 18hxi
Hi, I currently have a wired v1 Thermostat (RUxxx firmware 54.20) in the hall connected to my Glow Worm Ultracom 18hxi boiler (roughly 10 years old) and a Potterton EP2 controller next to the boiler. The bridge I have is one of the original larger ones and is not recognised by the Tado Pro app so I cant seemingly use that…
-
Does anybody from Tado look at any of the questions asked? My question remains unanswered.
My Tado system has been a problem ever since it was set up by a reputable installer. Now it refuses to work. How do we go about recovering the thousands of pounds we have invested trying to make Tado work?
-
What takes priority?
If I have a room with two radiators with Tado smart radiator controls and a wireless smart thermostat, what happens with priority? If one control reaches temperature, does it overrule the others, or do they all have to read the same temperature before something happens?
-
trying to find an answer for modulation
Hi people This is my first post so go easy and im sorry if this has been asked before. I upgraded my Tado setup to opentherm, i've read all about turning down a condensing boilers flow down to save a bit. My question is, is it better now having modulation to set the flow temp to max or high temp and let tado make the…
-
IOS 15.0.1 Geofencing issues
Hi Is anyone experiencing geofencing issues on IOS 15 and above since myself and my wife upgraded our iPhones we have to open the tado app to get the location update. This always worked well before. Is this a problem tado should address?
-
Locked Out of the App - Tado Won't Update its Password
The change password routine - or the interface - on the app seems to be buggy so I made the change via a web interface but although Tado asked me if I wanted to bring the app into line it hasn't done that. Normally I would delete an app and re-install but when I attempt that with Tado I get told I will lose my data. As an…
-
How do I tell the Wireless Sensor which radiator/s to control ?
I can set a smart schedule for my Wireless Sensor - but how does it 'know' which room it is in - which radiator/s to control?
-
V1 and V3 etc compatibility
Hi Guys, I have what i think is a Tado V1 Smart Thermostat which I have never installed (combi boiler location wasn't suitable for it). I have worked out I need the extension box, but only see V3 units available! Quick question is are they compatible (v1 thermoset and v3 extension). Thanks in advance! :)
-
Worcester CDi compact RF panel
My boiler has a Comfort RF2 fitted from installation I am OK with the wiring side of TADO but I can't disconnect the Comfort RF panel as I don't know how to access the ribbon cable plug. I don't seem to be able to remove the Comfort RF, maybe the TADO can't be used with this type of boiler?
-
How to turn off heater without closing radiator valves
Now when al rooms have reached the desired temperature, both the heater is turned off and all radiator valves are closed instead of just turning off the heater. This has 2 drawbacks: Firstly the batteries of the smart radiator thermostats deplete faster as they have to close and open each time. Secondly some central…
-
Tado wireless control receiver installation questions
Hello, I could do with some advice as I am trying to place my old panel wires into the Tado receiver. I have a Danfoss panel FP7898 with the following wires connected as below. N is Blue wire L is Brown wire No 1 Blue wire is DHW off No 2 empty is HTG off No 3 Red is DHW on No 4 Yellow is HTG on So I am thinking that I…
-
sdsdsdss
sdsdzzzzsd
-
sdsdsdss
sdsdsd
-
sdsdsdss
sdsdsd
-
sdsdsdss
sdsdsd
-
xxxxx
sdxxxxxxxxxxxxxxxsdsd
-
App no longer updating heating but showing as connected
The app is currently showing 27.2 degrees c from the Temperature Sensor, and appears to show as working but it's currently ~18-20 degrees c here. I've spent the last two days charing the sensor (one of the first gen versions, that are not embedded in the Thermostat) in case it was an issue with the battery. Today I tried…
-
Can I put Tado valves on all of my radiators?
I have a brand new Viessmann Vitodens 050-W. I would like to put Tado valves on all of my radiators but the installer wasn't sure if it was advisable as he wasn't particularly familiar with Tado equipment, so he recommended I leave one rad with manual controls. Your opinions would be welcome.
-
New wired wall thermostat doesn’t turn off
Ok so I think I might be losing my marbles? Have replaced a wall thermostat which died with a new one. All I did was remove the old one from the system and slot the new on in place and sync it up. However it seems unable to send an off signal? I’ve tested a few times and tried swapping a different one into the same room…
-
Tado AC Control with Smart Radiator Thermostat and/or Wireless Temp Sensor
I have a room with Tado Radiator Thermostat and planning to install wireless temperature sensor also there. Soon we are also getting Mitsubishi AC unit for cooling purposes in the same room. How does the Tado AC Control work with the Wireless Temperature Sensor or the Smart Radiator Thermostat in one room? Can the Tado UC…
-
EBUS - Vaillant/Glow-worm boilers
Hello, Can anyone provide me with a definite answer on where TADO are with support for EBUS on Vaillant Group Boilers? Can TADO be connected via EBUS? Can TADO be used on systems via Vaillant Group Smart Wiring? Do TADO EBUS connections have an impact on Boiler Guarantees? Thank you. Tony
-
Intergas hre is always on
I have installed the ne tado and connected the wire to + & - . Also selected D01 The kettle is always ON even after setting it to OFF in the thermostat Can someone help me with this?
-
Hot Water Issue
Hello Community, I’ve recently had a new boiler with Tado fitted. The app and Wireless Temp Sensor are showing the hot water is on but there is no request for heat showing on the Wireless Receiver and no hot water. Central heating is working, but since having turned off the heating last night, it appears to have stopped…
-
Can I use the extension kit as a hot water controller? New house and confused.
Hi, apologies if this is a question that gets asked a lot but i have recently moved house and the setup is different. I have been using Tado in my last house for the last 6 years successfully but need a bit of clarification for what to do. My previous house was gas central heating with a danfoss programmer wired directly…
-
Tado customer service is permanently offline
The link in my app goes to a page that says customer service is offline. It's been like that for 4 weeks.
-
Why are thermostats reporting different set and scheduled temperatures?
Hi, I’ve noticed recently that our tado thermostats are set to two different temperatures. Example: our Hallway is scheduled to be 17.5 degrees, but the app is saying the temperature is set to 13.6. (This is not related to actual temperature, which is 15). This is true for most of the thermostats. I’ve never noticed it…