-
With the warmer weather/summer coming how are we adjusting settings
Hi just wondered how to set up Tado with the summer coming, turn heating off on combi to water only, adjust smart schedule, gradually adjust the app settings? Thanks
-
Can i connect v3 to open therm
Intergas open therm connection can it be wired same as com with NC,? and will it save more money
-
Help with power supply of EU receiver to WB Greenstar 38cdi Classic
Dear all, I have replaced my existing Tado UK wireless receiver with a EU one. This is my original connection inside the boiler. I have moved this cable near B B connection and plugged in LR (black cable) and Ls (grey/brown mixed) in to individual B and B connection. Additionally I have put a link between LR and Ls. There…
-
How does tado work with air source heat pump
So, I’ve been running my oil boiler with tado, and worked a treat. Just switched to air source and i have no idea as to whether the boiler control is now redundant, and how I need to set the thermostats on the app etc. is the system still relevant or should I scrap it?
-
Reconnecting Tado assistance request - UFH, radiators and hot water
Hello all - apologies for the request, but my plumber / electrician is having issues getting my tado back online after a renovation and isn't having much luck getting through to the tado professional helpline, so I thought I would try here. My system is a combi boiler with one underfloor heating (UFH) zone in the kitchen,…
-
New starter advice please
Hi all. New to all this and decided on Tado. Question is do i go for a thermostat starter kit and ad the radiator valves as I go and cn afford or do I go for radiator starter kit and add thermostat later? Mainly looking for front room control at this time and then adding other rooms as I go. (Will leave one radiator un…
-
Advice requested on Installation issue
Our central heating system comprised:- Worcester Bosch boiler Greenstar Danesmoor Utility fitted about 9 years ago. Drayton LP522 Timer / Controller (wired) Drayton thermostat for down stairs (wired) Horstmann DRT 2 thermostat for upstairs (an integrated thermostat and a timer) wired The system has been piped with three…
-
Hot water control not working
I've recently bought a Tado internet bridge, wireless receiver & 4 radiator stats and wired up the internet bridge & receiver over the weekend (also adding the rad stats to the system). The heating control works fine but the receiver won't switch on the hot water, even though the control tab appears in the Tado app. I have…
-
2 wired thermostats off one Internet bridge?
Is it possible to have 2 wired thermostats connected to 1 Internet bridge? House has 2 boilersand have put in 2 wired thermostats. Can't seem to get them both working correctly even though I'm able to control both from app.
-
Registering a smart thermostat
Have moved to house with an existing Taco smart thermostat. Previous occupiers have registered it. I have downloaded the app but can't get the existing device registered. Anyone know how to solve this.
-
Do I need to keep the TADO app constantly active on my phone?c
Is each tado system controlled by the cloud or by the app, with the app managing the settings?
-
paring bridge
Bridge is fine, but I have to click “activate the pairing“ as it’s only active for “12 hours”. Why can’t you just have it on all the time?
-
Sluggish app.
Just wondering whether anyone has noticed the iOS version of the tadoº app. being very slow to respond of late? I've tried deleting it and reinstalling the app. but it remains much more sluggish than previously. Hugh
-
Room temperature set to 10c but is 24.7 what is wrong with room thermostat
I have set to 10c room thermostat to 10c but is 24.7 what is wrong with room thermostat
-
1/3 tado smart thermostats drains battery
Hi. We got three thermostats at home. Two are in the upstairs living room and one in the basement. I bought them all a half year ago, and since than i had to replace the battery in the basement 4 times, while just one time for one of the thermostats in the main living room. They are all set on the same temperature, the…
-
Energy Efficiency
It is my understanding that "smart" central heating controllers are more energy efficient because they "smooth out" the heating boosts, ie switch on/off more frequently so that the house cools down less in between each heating boost and therefore use less energy re-heating the house. Is this correct?
-
Room Thermostat not working
Anyone have tips/suggestions on how to fix the following problem, or is it terminal? I have a tado room stat and it's not switching. At one point the heating was stuck on, now it's stuck off. The thermostat is online and I can make changes to the temp on the app and see them on the stat display. But I never hear the click…
-
Adaptor for Pintossi M26 Valves
Hi Folks, I am based in Australia, and have had trouble sourcing the adapter Pintossi M26 valves for the Smart Thermostat. Does anyone know where I can source them at reasonable cost. I have 16 radiators to connect! Thanks Polmac
-
Hot water schedule
Hey guys, Had my system installed and working fine for the last few weeks. Last night Sunday as the clocks went back tado failed to activate our hot water schedule but everything else worked Cold shower this morning so not very happy. Working again now but why didn't it activate
-
Balance AC
Is anyone else using Balance AC? It doesn't seem to be working in the UK, it hasn't shown any values for the last few days I've looked. I'm also not convinced it works the way it says it should, I've got 3 heat pump AC indoor units used for heating and there have been times when one is above the target temperature, one…
-
App not working
Anyone else not able to login to their Tado app today? Keeps hanging with the loading spinner going round and round…
-
Heating on when programmed to off
This morning the heating came on but tado was programmed to off and not due to come on till later . Any ideas? I only have one thermostat on one room
-
Can I take my central thermostat out of the equation?
Hello, I don’t have a great understanding of how heating systems work but I’ll try my best to explain the context and question. Before tado, we started with a new vallaint boiler and a salus central thermostat + boiler control. We started by installing tado SRVs on most radiators and they worked great, except that the…
-
Automation disabled after manual input
Hi, I have a scheme active, however when i change the temparature manually on the thermostat the scheme disables. Is there a way to reactivate this automaticly when the next time scheme starts?
-
Disconnected while away
Was away on holiday, checked the thermostat temperature only to find it had disconnected, made contact with Tado to find out remote pairing could not be done. Stopped the holiday, got home and paired devices in seconds, the frustrations behind this happening was the comments from Tado on possible cause one was to make sure…
-
Heaters dont on or off on app
I have tadi installed 6 months ago and everything working fine until last month. Since last month I can only turn off hesting from wireless receiver. Whatever the changes I do are showing up wireless temporature sensor but heaters are not actually changing the heat, not on or off. From app in rooms and devices all are…
-
New boiler and EU wireless receiver installed - any software changes required?
Hello all, I had some advice on there about replacing my boiler and making sure Tado was Open Therm compatible so it can modulate the boiler. The boiler has now been replaced, and an EU wireless receiver has been installed and added to the app in place of the old UK receiver. I did ask about this on chat but I'm not sure…
-
What set up do I need?
It's seems a few people has the same problem as me too much jargon. I need help selecting what kit I need chat service made 3 different responses. I don't want bridges everywhere just want to replace thermostats with smart ones to control dual zone downstairs heating and water upstairs heating only. Both thermostats are…
-
Replacing Giacomini TRV
Found an adapter in the kit but can't find anything that would keep the extension pin central. Anyone had this problem? Did find one post but with no answer.
-
Polypipe Wiring
Hello, I wonder if you can help me please. I have purchased the Tado wired starter pack and a few wired thermostats to replace my old Polypipe wired thermostats. I have a water based under floor heating system. The thermostats only have 2 wires (blue and brown). The Polypipe thermostats are battery powered. Am I correct…