-
Add an Alexa feature: "Alexa, what is the humidity in the living room/bedroom/etc"
The Tado app clearly shows that humidity is being tracked. We can see the humidity in all the rooms. So those sensors are already present in the Tado devices. Yet, I can't ask Alexa to tell me what the humidity is. I'm a programmer, and I know that this wouldn't take a great deal of programming to implement. So I'm…
-
Early start for radiators
I tried early start in normal rooms with radiators and found the early start begins excessively early (like 4 hours!) and was advised this feature can only be used for very slow systems like underfloor heating. Pity it cannot learn over time how long it takes to heat the room, take outside temperature into account, and…
-
fonction iFeel Clim Gree
Bonjour, a quand la fonction iFeel intégrée au tado pour une meilleure efficacité et gestion de nos climes.
-
Hot water tank smart thermostat
I think there is a market to provide a variation on the Smart Thermostat in the form of a unit with a temperature sensor on a cable, to allow the user to install in a thermal water store. This can give the flexibility for hybrid systems that have multiple heat sources for the store such as Solar thermal, biomass and oil or…
-
Connect to enery supplier as a service
It would make it a lot easier and simpler to have a service that connects to the energy suppliers. This would make the the usage and money part of the application a lot more accurate to manage. I have already seen this service offered by some online applications.
-
Support for multiple people and multiple zones
With current geofencing, if all devices are away from home all zones are set to away. If at least one device is at home, all zones are set to home. Ideally, this should be more granular. As an example: We have two devices, mine and my partners. We have four zones: my study, my partner's study, a shared bedroom and a shared…
-
Geofencing by person
In a multi-person household, geofencing could be tailored so that one person leaving could adjust part of the house leaving the rest heated for those remaining inside. So if I go out, for example, the room I use most of the time could be left unheated, but other rooms still follow their usual schedule.
-
Custom name per device beside room name
Currently any device has the name of the room and a non descriptive id. To be able to identify for example the device with low battery it is useful to get a notification for a device with clear name (e.g. under window radiator, bedroom 1, bedroom 2)
-
Retaining screw on smart rad valve.
The smart Rad valve needs a retaining screw. This would stop people from accidentally unclipping the head from the screw on base while twisting the top.
-
Winter, Autumn, Summer Schedule
Please can you create a Winter, Autumn & and Summer Schedule. The aim is to be able to set heating on and off times for each room based on the Winter / Autumn or Summer Schedule. In each season the the heating and water needs to start at different times and be on or off each room in room. This would be very helpful.
-
Please bring back “Until next automatic change” in the app manual mode
With the release of App version 5.11 that aligns the UI of V3 and V3+ You have have removed a feature that I found really useful. With the old app I could set a temperature in manual “Until next automatic change”. It would remain in this mode until either a Smart Schedule event occurred, OR I LEFT HOME, see image. With the…
-
Battery Changing
Hi Development Any thoughts on logging the battery changes. I suppose I could use a spreadsheet but seems a little OTT. The reason I’m asking is that a room which had new batteries (good ones) just three months ago and which is hardly used (temperature is set to 18 degrees). Is asking for new batteries again. Having said…
-
Away by individual family member
I would like to be able to set different away settings for each room by family member. I have 3 scenarios: 1. Both my wife and I are home: Both our office rooms we are using for homeoffice should heat. 2. I am home, my wife is not: Only my office room should heat. 3. I am out of home but my wife is home: her office room…
-
Dark Mode for Web App
Now that we have Dark Mode for mobile, how about adding the same for the Web App. opened at the request of @Manuel
-
Offset Identifier on Tado Thermostat Tiles
I use an offset for one of my thermostats to avoid the frost protection kicking in when I don't want it to (given that there is no way of setting a minimum temperature manually). Could there be a symbol or other identifier on the Home Screen tiles for when thermostat controllers have had an offset applied? Or even the…
-
Permettre à la sonde de température de demander du chauffage à la chaudière directement
Apparemment pour le moment là sonde de température ne sert qu'à mesurer la température et ne peut que communiquer avec les vannes thermostatiques connectées des radiateurs. Ce serait intéressant que la sonde puisse directement communiquer avec la chaudière. Par exemple pour une chambre qui a besoin de rester à 16° :…
-
*Immediate* notification when batteries are low
On the help pages, I read that this is what happens when the batteries in the radiator give out: ...Alternatively, your Smart Radiator Thermostat may not close fully, which can cause your radiators to heat even when not needed... When the batteries of your devices run out, tado° will notify you as follows: First, your…
-
Dashboard
I would love to see a 'dashboard' type feature where I can see who and when users manually adjusted the trv's or when schedules started or ended or when home and away are started.
-
widgets
Sería bueno tener la opción de activar un widgets en el teléfono para tener acceso directo a la temperatura de una habitación.
-
Configurable schedule
Currently we can have 1 schedule for all days of the week, 3 schedules: weekdays & Saturday & Sunday or 7 schedules: every day separate. Can we get a way to define this in a custom way? I work from home 4 days a week, so to be able to schedule those days separate from all other days would be so much more convenient! It…
-
Boiler service logs/recording
Add boiler maintenance recording to the care & protect tab with reminders for servicing due.
-
Temporary heating schedule option
On the tabs for heating such as the days the ability to create a temporary schedule for the day and if I need to do it again I could select the option as it would be perfect for days when I need to give my baby a bath.
-
Different houses
I would appreciate to be able to manage my 2 houses from the same app and account. Currently this is missing
-
”Slow start” feature for less thermal stress
Opening the radiator valve fully with a cold system might cause unnecessary thermal stress on the system (and noise due to thermal expansion). Ramping up the valve for a short time might reduce the stress. I suggest a feature in line with “early start” called “slow start” to automatically ramp up the opening of the valve…
-
Tado Feature Request: Authorize by Room When Inviting a User.
Hi Everyone, I am a landlord. I have installed Tado in my family home and in my tenanted HMOs (Houses Of Multiple Occupancy where several tenants live under one roof, have their own privet rooms, and share communal rooms, such as ith=chens ad lounges). I have spent about £5K so far on Tado devices. I am delighted with the…
-
My experience of buying Tado
I am truly amazed how easy and straightforward it was to swap over my existing system to the Tado Starter Kit V3+. Right from the start, after scanning the QR code to download the app, making an account and preparing for the installation, this was a very well illustrated, easy to follow installation process. Once the right…
-
Selective boost
The boost all rooms is a nice option on occasions but what I’d really like to see is individual room boosts so if I’m working in one particular area I can boost the heating for a set period, say 15 mins without wasting energy heating the whole house.
-
Allow the setting of a specific end time when manually overriding.
Dear Everyone, Allow the setting of a specific end time when manually overriding. The way our family uses our house means that having timed heating makes no sense, so we have that effectively disabled by setting one time period for 24 hours at a low temperature (10C). We control individual rooms by overriding this…
-
Local control - not internet dependant
Given that other Smart Home products (Aqara for insurance) can now work without the internet, than it's about time Tado mixed with the times.
-
Extra functions V3+
It would be particularly nice to be able to have a few "free" functions in the app that you can program yourself. I have a function on my Mitsubishi heat pump that is not supported now. And if you can program a mobile phone to be a remote control, then surely it is also possible for Tado??