-
Flame 🔥 icon
How about adding a flame 🔥 icon to the heating zones that are currently heating? Would be clearer than it is presently
-
Home page indication for rooms on altered schedule
I am new to this, and messing with the schedules to set it up comfortably. I've noticed when I make a manual change to a room schedule, and then return to the homepage, the room icons show the set temps, but the button at the top right says Resume Schedule All Rooms. What you can't tell is which room(s) are set outside the…
-
Use 1 decimal degree Celsius precision on Smart Thermostat
While the app allows setting the temperature in 0.1 degree Celsius increments, the Smart Thermostat only supports 1 degree Celsius increments
-
Stop AC from getting over temperature
I have tado AC control set to heat my office during the week. It's set to 17 degrees, but I regularly have to temporarily turn it off because it's showing 23 degrees in the room. Tado should be turning the AC off proactively to achieve the temperature requested.
-
Reminder that a schedule has been overidden "until you cancel"
When you use Google home to control the status of the heating or hot water, the schedule gets overridden "until you cancel". It would be good if tado sent you a reminder after sometime, or had the little infinity symbol on the tile (or both) to indicate that the room or hot water wasn't on its usual schedule. My hot water…
-
Text size.
Great app but the temp display is unnecessarily small.
-
Family Geofence
Would it be possible to have family members assigned to certain rooms? Example, Son staying away at the weekend with grandparents his room would be set to away as no requirement to heat.
-
Sensori Master e sensori Slave
Buongiorno a tutti, a casa io ho un sensore master che accende e spegne il riscaldamento, e due sensori slave che possono solo tenere aperto o chiudere parte del circuito. Sarebbe bello poter impostare questa situazione nell'app, in modo che nei grafici i sensori slave risultino attivi solo se è attivo il sensore master.…
-
Add a text field on devices to show their location in the room.
I have three radiators in a room. It isn’t easy to locate a TRV which needs resetting. Have to use the Hi button and work out which one isn’t responding. Easy solved by adding a text field in the devices summary screen. It could say “near door”, “behind settee” and “near hifi”.
-
Either block or support being a member of more than one Tado home
I accepted a membership request from my son’s Tado and it wiped my App configuration. Was a nightmare to get sorted. Either block accepting a request if you already have a membership or support multiple homes in the app properly!
-
Basic Wired Stat
Hi, I have a home with underfloor heating and 13 zones. I wish to upgrade. I use TADO at another property and it is great. However, at around 100 pound for a stat it is "too expensive and too smart" to buy 13 of them. I believe there is logic in a more basic phone connected wired stat. There is no need for humidity,…
-
Be able to set max outgoing water heating temperature in central heating (CV)
In the Netherlands most people have a central gas heater which pomps hot water around in the house through floors, radiators or convectors, also called in Dutch: CV installatie. What I cannot do with Tado is adjust the outgoing hot water temperature of this central heater, via an OpenThem connection, but I cannot adjust…
-
One a day Valve Push
Hi, Can Tado please implement a ‘once a day’ radiator valve push to help prevent radiator valves from seizing up over the summer months and when not used in general. Other smart radiator thermostats currently implement this and it would be very easy to do
-
Temporary temperature schedule
Allow users to set up a temporary schedule that overrules the actual schedule. Why? Sometimes I hear the night before that I have to work at home the next day. I want a warm office the next morning, but to do that I have to change the actual schedule and have to change it back afterwards. This is not convenient, so such…
-
Dynamic schedule - Auto Sleep Wake-up
Make Tado intelligent by integrating it with sleep sensors and or your wake-up alarm. In that way you could have a dynamic schedule (instead of a fixed one) that would activate when certain people are in the house but sleeping or when those persons are scheduled to wake-up based on their wake-up alarm set on their phone…
-
Support boilers with no ability for different levels of heating better
My boiler, like many others, does not support different levels of heating - just on or off. I find it really annoying that my app says 1 flame or “heating to 20.8c” and colours the graph area in when it isn’t actually heating my house. Additionally this makes the stats on how long the heating has been running during the…
-
Bridge Attachment kit
The tiny size of the Tado Bridge is a big plus point. However, I find that the double-sided sticky pads come unstuck every few days. I am therefore having to construct my own holder, or will have to use a very strong glue to permanently attach the device. A tab above and below with a screw hold would work better.
-
New hardware idea - Zone Controller and Electrical Heat Switch
Just i read Tado best alternative, Drayton website and i found that they maked some new devices: Zone Controller: https://www.draytoncontrols.co.uk/products/Smart-Heating/Wiser/wiser-underfloor-heating-controller Electrical Heat Switch:…
-
Simple Improvements to App Homescreen View
I'd like to suggest a couple of simple improvements (IMHO) to the content of the homescreen room tiles in the Tado app: The tile is large, and there is plenty of spare space on it, so could we get an indicator of the room's temperature behaviour. What I mean is that if the room temperature is rising then an arrow pointing…
-
Alternative scenario
Now first time using Tado during the holidays I am missing the option of an alternative scenario. On home screen have the option to select / create one e.g. Holiday (or select Main as default) To create either you can first make a copy of Main (so you only need to change some blocks of some rooms) or start with an empty…
-
widget for geofencing
dear community, it would be nice to add a widget to the app to provide the possibility to manually toggle the away/home from the phone desktop
-
[Released] Copy and Paste schedules
tado° edit 2: With the new app release of today (oct 25th) roughly half of our customers will start seeing this feature in the app. This update was based on suggestions of the community (you), interviews our development team have conducted and the feedback from you might have noticed when exiting the Smart Schedule. The…
-
graph
The Graphs on the app should also be posible to view in a browser. This with the option to download "raw" data, like in a CSV. Thank you
-
Time display on temperature graphs
When you display the temperature graph from the tado app (iOS) you can touch the display to show the actual temperature. But the time is missing on the pop-up. Can this be included?
-
Maximum heating setting-lock
So many people have younger adults who may want to set the heating at silly temperatures. So my idea is a max temp setting-which can be controlled by an admin for the house? I think this is a good thing for many. Also avoids errors if knocking to 23 instead of 21 for example.
-
"Boiler-on" indicator on Home Screen
It would be helpful to have an easy way to tell if the boiler is being called upon or not - as it can affect radiators that do not behave independently and also help in understanding the general picture when it comes to fuel consumption. Currently, the only way to do this is to review each and every tile to see if any of…
-
Allow output of temperature,
Hello, I would like to record the temperature every time it changed to my spreadsheet, currently I can do this by creating an individual recipe for every temperature rise and every temperature fall, obviously this would take a long a time. Would it be possible to create a query which simply reports the temp, or a trigger…
-
Bug: Switching on via alexa routines sets temp to 21 degrees
If you use Alexa routines to switch off and on a thermostat then it will always default to 21 degrees instead of the schedule (even if the schedule is for it to be off anyway.) This means a basic functions like disabling the heating when the ring alarm is armed or disabling unoccupied parts of the house are impossible.
-
Include heating graphs in features without having to pay extra
I have only just purchased and installed the Tado system in my home, at huge cost with 12 TRV's to try and get even heating and where I want it. To check its working I really want to see what the temperature has been over a period of time to see how well its working, and when the boiler has been on and off, to see if I…
-
one time heating for short time
Hi, I have idea if is it possible to add in your app one time heating time. For example if I have heating plan in smart schedule, but something change in one day and I know it need heating 3 hours early, but I don't want to change the plan.