-
Hide Hot Water Option
Have recently moved from a system boiler to a combi boiler. Still have the hot water option even though it is now defunct, would be good to be able to hide it in the settings.
-
Merged: Latest version of App.
This discussion has been merged.
-
Advance Programme Setting
Hi I have my heating system set up to come on at a specific time. Sometimes I get home early and want to turn the schedule on rather than wait for the schedule to kick in. At present if you boost the system ALL the radiators come on. Turning them on individually is a pain I have contacted Tado and there is no way around…
-
Suppress Open Window Notification if room already warm
I keep getting notifications of open windows asking if I want to turn the heating off in a room which is good. However I keep getting them while the temperature of the room is already above what I had set. This means that the heating in that should already be turned off. Would it make sense to not send the notification if…
-
Feedback - Room Screen improvements
Not only have we recently lost the ability to manually change the temperature in 0.1 degree increments, but now it seems to take much more work (button presses) to manually set the temperature for each room. I don't have a previous version of the app to go back to, but I believe we were able to modify the temperature at…
-
Tado° APP Quick Buttons
I would welcome the ability to have/select/create Quick Buttons on the Tado App home screen. Especially as part of a SLEEP functionality. For custom programming it would make up for a simple IFTTT-rule. If custom programming would not be an option, then a selection of preset rules is a way forward. I suggest something…
-
Smart AC Control - Sleep mode
I would love for a simple Sleep mode function to be able to set the AC to -ON- and then rely for it to go into Standby when time is due. Per now, when I use the 'Room' selector of the App Home window, I can use the set up slider to set a time for countdown, but the Tado will not set my AC to Standby when time is due? Why…
-
Smart AC Control - vane and swing control
The tado Smart AC Control is great - except for one thing. My aircon units have the ability to vane both left/right and up/down, and the traditional remote will control these. The AC Control does not, which means that at night, the air blows directly in our face and we cannot direct it to vane or point in a different…
-
Stop account leakage from the community
Currently it is possible to retrieve intelligence on the existence of community accounts by entering e-mail-addresses at login. This is especially bad, because many might be using the same e-mail for their personal tado account. This is highly advised against by several security guidelines, including NIST and ISO.
-
Sensors for hot water cylinder
I have purchased the tado° Wireless Smart Thermostat Starter Kit V3+ with Hot Water Control, but the control is just a glorified on/off switch. It does not give me any flexibility to control the temperature of the water in the cylinder nor the least to see what the temperature currently is. Due to reasons unknown it…
-
Smart AC Controller should be able to use a separate Temperature Sensor
I've been a happy user of Tado for two or three years. So when we added an A/C unit to our attic, I naturally purchased a Tado Smart AC Controller, assuming it would integrate with the existing radiators and Remote Temperature Sensors in the same room. I was quite surprised to discover this isn't possible. I might be able…
-
Motion sensor to detect if there is activity in the room and activate heating
Could you introduce a motion sensor that understands if there is someone in the room so that it starts heating the room only if there is activity in the room. We have some rooms that we rarely use, it could be very handy to have this functionality with sensors detecting the activity and heat the room when people are in it.
-
IFTTT - Return to tado auto mode - Graph should show auto mode colour.
Minor request for change. When using IFTTT to return tado to auto mode all standard functionality works perfectly. However, even though tado resumes full control the graph displays all time after this in grey (manual mode). This remains until you manually go in and change the temperature and cancel (or use a timed duration…
-
Alexa Humidity Reporting
This function is available on the Google ecosystem, but not with Amazon's one. Currently only the temperature is reported, can the humidity also be fedback. i could then use this to automate the extractor fans in the bathroom, kitchen and utility rooms when needed.
-
Improvements to the Wireless Receiver / Programmer Cover
In the UK, many modern houses have the programmer / controller in an easily accessible place and it is not uncommon to find them on the kitchen wall about 20cm or so above a kitchen worktop. They are therefore potentially at risk of splash or dirt ingress. Many of these controllers / programmers have the cables coming in…
-
Weekly view in heating activity
There are monthly and yearly view in heating activity report. Can you add a weekly view as well to cover 52 weeks? Should be a relatively simple thing to add to the report
-
App Bug Found - Boiler Running with Rads Off
Hi All, I found a bug in your app. I have been using Tado for 2 weeks without issue, it's great (but would love a 30min boost button per room). I recently added my wife to my home to share control. During a demo of the app, she pushed the "Boost" button and then a few seconds later clicked the "turn all off " button to…
-
Download sensor data
It will be very helpful to download sensor data to develop an understanding of the heating patterns in my house. The product is fantastic, and this feature would enhance the product tremendously. I had Beurer temperature and humidity sensors in each room in my previous house. After comparison, I was able to regulate the…
-
Bug in the way heating activity is calculated
According to Tado's app my heating system has been on for 20h per day on average during the last month, and 24 full hours the day before yesterday. In reality my boiler has been on for only about 10 minutes the day before yesterday, and the same goes for the rest of the month. The reason for this funny discrepancy becomes…
-
Heating Activity Chart
I have been looking at the heating activity chart and it is quite hard to see the usage difference due the scaling on the chart. The same size columns can be very different on low usage. It would be good if the chart could auto scale depending on my usage. It would be a lot easier to compare day in day, month on month. Do…
-
Heating Activity report
Heating Activity report is inflated by TRVs working independently that do not really contribute to extra heating requests. So, in my current setup I have a set-back temperature overnight across all Zones. However, most of time the heating will only trigger after a few good hours (that's the point of set-back, save on…
-
Update from the tado° Heating Installation product team about the Zone Controller Feature
We would like to share some of the smaller product improvements that the Heating Installation product team has been working on. The primary reason is to get feedback from our community to see if certain features are clear or if more clarity is required. As the Heating Installation product team we mainly deal with the DIY…
-
The Big Idea Archive
We have reached 24 pages of ideas, and the overview is lost. To enable new users to get an overview of the most popular ideas, all ideas that did not receive any upvotes in the past years will be archived to this topic. You can give your idea a 2nd chance by opening a new topic if you wish.
-
Smart AC readings for Measuring Room Temp/Humidity
Scenario where you have a radiators and AC in room. The radiator have valve, but readings from valves are way off due simply location Reading of Smart AC is great, as you can position it on good place. When you open the Room properties you have the option to choose Measuring Unit, but the Smart AC is not there. Please…
-
[Feature Request] Apple AirTags and GeoFencing
Hi, One of the limitations of the current geofencing feature is that it is limited to own devices. This means that if we have guests at home (or back when we could and hopefully when will be able to again in the near future) or someone like a nanny and me and my wife leave the house the heating shuts down. A very easy…
-
Heat differences in a room with more than 1 radiator
I have a big living room with 4 radiators installed in different parts of the room and 1 smart thermostate. The temperature difference in different parts of the zone could be as big as 2-3 degrees but the smart thermostate is in a hotter part of the room. I would like to adjust the smart radiator thermostates offset…
-
Apple Watch & Mac app
Would love to see the app extended to the watch and Mac app store please
-
All off for X time or until hh:mm
I love the new "All off" or "boost heating" buttons. It would be great to be able to add a time to these features. For example: All off until 20h00 All off for 3 hours All off until 10.04.2021 @ 8h00
-
App Actionable Notification for All Off/Boost
Although the Turn All Rooms Off and Boost options are useful additions to the app, without a way to say how long this is for it is easy to forget to set back. If the Tado App had an actionable notification on Android and similar on iOS when in the Off or Boosted state, then this would be much easier for users to remember…
-
[IFTTT] Determining if tado is in Home or Away mode
Without consuming a tado trigger, the following filter code can determine if your system is in Away or Home mode by just querying the last switch to Home and the last one to Away. I wrote this because I did not find any available variable from the tado triggers/queries. I use it to skip heating up early if the system is in…