-
Invite users only for geofencing
Hi, It could be a good idea to invite people on the app only for geofencing (right management or another app only for this usage?). My kids are at home from time to time between school sessions and i need geofencing to heat up the home when they come back. But i don't want my kids to play with tado settings. "Oh, it's cold…
-
Allow naming of smart radiator thermostat
It would be really good if I could assign names to all of my smart thermostats. It would make it so much easier to identify which one needs its batteries changed.
-
Summer/Winter Mode
The app should have a summer mode which, once activated, amends all schedules down by a predetermined amount, to counter ambient temperatures. For example, 22 degrees in winter feels comfortable, whereas 22 degrees in summer feels too hot. This is due to ambient temperatures, which affect heat retention. Now that temps…
-
Simple improvement to use Tado both for heating and cooling
More and more users are moving to heath pumps both for heating and cooling, by having the same pump satisfy both needs by pumping fluid under the pavement. Unfortunately, so far, Tado only has a minimum temperature in his controller, so it is only possible to employ it for heating. A simple improvement would entail adding…
-
Users with different roles
When looking at the user configuration it would be good to see that not all users have full control over the whole system. I am thinking about (for example) 2 roles: An Administrator role and a user role. Obviously, the Administrator can do everything. The user role can be connected to specific rooms and control that room.…
-
Summer mode
My son has a Netatmo system and during the summer, the connected valves calibrate every 2 weeks, even when the thermostat is off, so that the thermostatic heads do not get calcified or stuck (which may happen if the valve is fully closed for a couple months). With Tado, I need to take all my programming to put the valves…
-
Expose humidity and temperature sensors to HomeKit
It would be very useful to have the humidity and temperature sensors exposed into the HomeKit environment, in order to allow the creation of automations in the Apple Home app. This could be extremely useful for instance with the Smart A/C controllers: for example, to create an automation to automatically power on the A/C…
-
Remove the 10 room limit from the controller
Please remove or increase the 10-room limit from the controller. I have to group rooms together to make my system work which is not ideal.
-
Energy IQ cost to account for standing charge
I find the estimated gas cost estimate to be reasonably good, but the cost shown is for the consumption cost only. It would be useful for option to include the cost of daily standing charge such that the total month prediction / comparison reflects the total bill for gas not just the consumption.
-
Multiple internet bridge's
Hello, I'm having trouble with keeping all my devices connected to the internet bridge. I was thinking why can't tado software team roll out an update so you can have 2 or more internet bridge's on the same network at different places in the house to expand your coverage.
-
Widget
would be really great if developers can adds widget for both android and iOS.
-
Downloadable data
I love the Tado temperature/humidity graphs. However, the ability to only see the data on a day by day basis is restricting. The ability to download your data for use in a spreadsheet (in the same way that Fitbit does with its far more complicated data set) would be extremely useful. For example, it would be possible to…
-
Low/High humidity notifications
Would be great for Tado app to send a notification when a room has low or high Humidity, with the ability to set the level that the notification can be triggered.
-
App : dark mode
Do you plan to provide a dark mode compatible app ? When ? Thank you for my eyes.
-
Options to Limit Early Start
I like the idea of 'early start' and in general I think it works well. However, first thing in the morning there is a limit to how early I want the heating to come on, even if it doesn't get up to temperature in time (e.g. very cold mornings). This is because: - I would rather just live with it being a bit colder than…
-
Manual Open window detection button
Hi, I really do miss a button to cut off the heat when I open windows. It doesn’t always detect it, and it can be useful in these spring days just to open the windows. If it detects the open window, heat will start automatically after the set time, but that could be useful not to do. Too much work to take each thermostat…
-
TADO notifications when the boiler isn't working.
It would be really cool to have an active notification feature for users where tado demands heat and for whatever reason, the house does not get warmer. Notifications should include emails as well as tado badges. use: Unattended Property - know that the frost protection has stopped working - (for whatever reason) I have no…
-
Tado tiles a waste of an oppitunity
I am a new comer to Tado and the biggest disappointment is the app, the tiles on the Home section is an utter shambles, I find it really stupid having to go into a tile to view the inside temp, humidity and heat request (the 3 little squiggles) and the fact that no icon with in the tiles show if the radiator is receiving…
-
Visualize heating requests of all rooms in 1 graph
In the app I can see the temperature and heating request of a room. I would like to see the heating request of each room in a single graph, preferably over multiple days. I made the graph below using the API in just a few hours, and I think Tado should add such a graph to the app as well.
-
Configurable Boost Timer
Feature request: to be able to set how long the boost heating button should last for as 30 mins can be quite shotr especially if you’ve been away and are heading home outside of set heating hours.
-
Oil Tank level monitor
Would it be possible to develop a Tado compatible heating oil tank level monitor?
-
Boost individual room
The option to boost an individual room rather than whole house heating sometimes the upstairs is cooler the down stairs and would be good to be able to boost individual room but just now need to boost he house.
-
Access to tenants
To allow tenants to use the system, I have to currently give them full access including administrator privileges. Please introduce a feature whereby users can be added that can use the system and control heating without having administrator authority. Thanks
-
°tado in the summer months
I am very happy with the smart radiator thermostats. But it’s a pity that they don’t unlock their full potential in summer months. On hot days, most people leave the windows closed during the day so that the apartment does not heat up unnecessarily. How convenient would it be to receive a push message in the evening as…
-
app functionality when internet connection is disrupted
If for whatever reason my internet connection stops working and I am at home, I would still like to be able to use the app to control your heating and/or hot water.
-
More Settings options for AC
Current AC v3 owner... satisfied with the overall experience. As others have said, display could be showing lots more. Controls could be a little easier/more intuitive and Humidity could be visible to the Home app as a tile. Ideally, the device could be receiving the "dumb" remote signals to update its status as well. But…
-
Schedule change for all rooms
It would be great if you could set a schedule for all rooms at once rather than having to change them all individually. Is this in the pipeline?
-
Setting to keep the valves fully open in summer
Usually the response how to set all thermostats in summer is to set OFF - but this is wrong, spring of the valve is pressed whole summer and can get stuck when heating season is back and also this reduce "the life" of the valve. Now, there is no way in the app to set all valves to fully open state for summer, I had to…
-
Add Boiler Flow Rate temp to heating graph
Keep a record of the boiler flow rate temp on the heating graph
-
Thermostat Display Always on
The Display of the Smart Thermostat is only visible when Push button. My former Thermostat was a 'Toon" and we used to look at time and temp when ever in the room. The New Tado does have a fancy look, but I would like to havethe display to be always on (and if possibel off during night-time/when not home). So maybe it can…