-
How to combine two Tado systems?
Here is the situation: My mom had a wireless receiver directly connected to the boiler and a wireless thermostat. In my previous apartment, I had my separate system (my own account) with several smart valves and a wireless thermostat. Now I moved in to my mother’s apartment and she left me her system. How do I combine her…
-
I want to wire the wireless receiver to a Vokera Compact 24 Combi Boiler.
The step by step Tado guide was a little unclear for me. Can someone help me with the wiring? I have attached two photos showing the current set up.
-
Is the Tado v3+ wired compatible with Vaillant Ecotec Plus VC 356/5
Hi, Newbie here, is the Tado V3+ Wired compatible with the Vaillant Ecotec Plus VV 356/5 boiler, and if so, what is it best to link it with : OpenTerm or eBUS? Many thanks, M.
-
New wireless temperature sensor showing as off-line
Hi all. Followed the install instructions - pressed the button for 3 seconds but nothing happens on the display. The device then does show up under rooms and devices if I back out out of the installation screen, but is offline. This is the second unit I've had the same problem with. The internet bridge is in pairing mode…
-
Does TaDo show the percentage of radiator valve opening?
I would like to know not only the temperature but also how much my radiator valve is open in percentage (like Bosch does). Can TaDo do the same? I can’t find it in the app…
-
Hive to Taco
Hello! We've recently moved house and I want to bring my Tado system with us. There is a Hive Heat Link in the new place but when I have followed the installation instructions to the new Wireless Receiver (Gone from Combi Boiler to HW/CH system) the wiring steps don't match. My question is do I NEED a NC circuit? As there…
-
Tado App
Recently replaced my tado thermostat and it works ok but app doesn’t show room temp throughout the day as before. Any ideas?
-
Wunda floor heating replace Hortsmann Channel Plus H37XL, 3-zone timer with Tado
I want to replace a Hortsmann Channel Plus H37XL, 3-zone timer. My radiators and underfloor heating and water are controlled with it. The underfloor heating control box is a Wunda floor E8.583RF Wireless Control Centre, a photo of the circuit connections is in this PDF here -->…
-
Can Tado work alongside an underfloor heating system?
Hi, I'm considering buying a Tado Home Bundle - Wireless Starter Kit + 4 smart TRVs (great offer at Costco at the moment). I currently have a two zone heating arrangement in my house, namely an under-floor system on the ground floor, and conventional radiators on the upper floor, all operated by a Horstmann H37XL Three…
-
One room overheating
One of my 7 room stats is still heating to 24 - despite me switching it "Off" on the App. The underfloor heating actuator for that room is showing that it is drawing heat from the boiler (top popped up). All the other rooms are behaving normally (set at 20 degrees - as set in the Smart Schedule. ) I have tried re-pairing…
-
One device makes room go offine?
So I have a room in our commercial building with 7 radiator thermostats and one wireless controller for that space. Once in a while one of the radiators will lose connectivity diabling access to the remaining devices via the app. The app tells me the room is offline because one device is offline. Is this normal? Is there a…
-
V1 radiator thermostat issue and replacement
Hi all. I have a V1 setup with 24 radiator valves. One seems to be bricked. It won't ever boot fully and start the calibration process. First question... does anyone know how to overcome this? I've tried disconnecting for several days. I've ensured it is close to the bridge, I've tried reset. Firmware is 54.20. Second…
-
Smart AC Control in synch with IR remote?
If I use the IR remote control to change my air conditioner settings (e.g. on/off or change temperature setting), will the Smart AC Control be updated to the new status? And will the tado app therefore also show the new status?
-
Stuck with Salus IT500 replacement and another thermostat
Just bought the wireless starter to replace my Salus IT500. Can anybody help me with installation please. I use it via the app or black coloured wireless Salus control. Picture are attached. Other thing I have seen is an wired thermostat in the kitchen (that could be a seperate underfloor heating thermostat but not sure)…
-
Android constantly using location - how to stop?
I've upgraded to Android 13. I now have a permanent green dot showing that Tado is constantly using my location. When I click on the notification it says Tado last accessed the location an hour ago and is allowed all the time. Is there a way to stop this while keeping geofencing? None of my other location based apps cause…
-
New flat
Hello guys, i am building a new flat. The flat will have underfloor heating zones (Master bedroom, Bedroom 1, Bedroom 2, Master bathroom, Main Bathroom, kitchen, hall and living room) So thats 8 zones for heating. Now for Air Conditioning, i will have a VRV from Daikin, 4 different airconditions. My questions are: How will…
-
Test in the App !
The name of the ROM is in half ? Have been trying to delete the App and indstalleret again without any success. Best regards Bo Cramer
-
Lost hot water tile
For no apparent reason both users have lost the hot water tile on Home Screen. Any idea how to get it back?
-
Vaillant VRT30 wired thermostat
Hi all I am replacing a VRT30 with a Tado wired thermostat. The VRT30 is connected to a controller that will be set to constant for heating. The VRT has the following cables that I am trying to understand so I can connect to the Tado. 3/L 4/☀️ 5/N Can anyone advise? Many thanks in advance. Rob
-
Adding non Tado smart valves to system
Hi just wondered if anyone had added non Tado valves to their system, thinking of adding some others and controlling them through HomeKit/home assistant, reason is the cost of Tado and smart features, and later on jumping completely to another system ?
-
Upgraded from V1 to new V3+ Equipment
The upgrade process went relatively smooth, however I appear to be unable to move the hot water over from the old 'smart thermostat' to the new 'wireless receiver with water'? Hot Water control is still pointing to the old device in the app & I've no way of checking that we are actually getting hot water at this stage.…
-
Does Tado with ebus have a 'learning' phase?
Hello, I was wondering, if using the wired Tado V3 and ebus via the +- connections, will mean that the first few weeks of a new installation be a 'learning' phase for Tado? Meaning, will Tado be logging inside and outside temperatures and timing how long it takes to heat my house in different scenarios, adjusting itself…
-
I have two brown wires in Terminal 5
I am going through the step by step and have come to the connection phase. In Terminal 5 I have the bridge wire and two brown wires. The bridge wire is no longer needed, the two brown wires have stumped me? It’s says to treat them as the cable in terminal L. Does this mean they all go into L totaling 4 cables ?
-
Smart AC Control does not maintain the desired temperature.
hi, my Smart AC Control usually continues up to 3 degrees above the set temperature that I have set and that is shown in the display. Can I set a working temperature it works in between.
-
Geofencing on Android 13
Hi all, since I updated to Android 13 Geofencing cannot be enabled because it requires to set location permissions to "Allow ALL the Time" and this setting is not available anymore. Now I can only see "Allow only when using the App". Has anyone come across this and has resolved it? I am using Tado app on a Xiaomi Remi Note…
-
Megatherm Wired?
Hello How should I put the cables in the tado? My Megatherm thermostats do not appear in the guide. I can't upload a picture?
-
OPEN THERM - 2 Zone Heating
Hello, Is it possible to use a TADO control (or 2) and connect them both via an OPEN THERM Connection on a Combination boiler? Thanks Tony
-
Wired or wireless
I can't work out if my current system needs wireless or wired products. This must be a common issue. I have a new vaillant system boiler, a honeywell wired control/timer box, and one one honeywell wired thermostat. Radiators have drayton TRV's. I have just built a new large kitchen extension, and we spend most time there.…
-
Help, no “switched live” on boiler
I don’t appear to have a switched live on my boiler which is quite old Worcester HPJB.19000. Wire to boiler goes to thermostat in boiler, which appears to be removable, then onwards to boiler. How can I overcome this to make the system work with Tado? The wiring diagram specifies switched live so not sure what to do next?
-
Tado app NOK on iPhone XR but works on other devices ... ?
hi everybody, anyone able to help with this strange phenomenon : I have Tado app running on a (very) old iPhone (model 9?), on my iPad and also in Safari browser on Mac + also on my daily usage iPhone XR. all four connections worked perfectly since months, not an issue at all (and very happy with Tado !!) but since a few…