-
Adding Underfloor Heating Systems
My house has a central heating system plus underfloor heating in 3 rooms. Can I bring the 3 x underfloor heating systems into my Toda environment as separate zones. So I would have 1 x room thermostat, 3 x smart radiator valves & 3 x underfloor heating controls - 7 zones in total. 2 of the underfloor heating systems are…
-
Radiator thermostat dead after battery change
Today I had two radiators with the message: low battery. So I decided to change them. I replaced the batteries in both radiator thermostats and only one came alive and the other is dead in the water. No lights, no nothing. Does anyone know how to reanimate the radiator thermostat? FYI: new batteries, tried to change…
-
Tado V3 Wired Starter Kit with Glowworm Essential 28c Boiler - Heating just stays on
Hello, I have installed and configured the wired starter kit with my Glowworm Essential 28c boiler but no matter what I have set in the app for the heating schedule, the boiler just stays on. I have: Wired the eBus terminations correctly. Registered the internet bridge, receiver and wireless temp sensor and they appear…
-
morco GB24 combi boiler
hi im looking for some help on how to wire the v3+ reciever to my morco GB24 combi boiler to control my heating thankyou
-
Tado if overshooting with new boiler
Hi, I recently swapped my old system boiler for a combi. I specifically got a boiler with opentherm so Tado could modulate it and that is all wired up and working fine. I’ve actually had my Tado for many years and have swore by it. But since swapping the boilers my rooms are always over shooting when they didn’t do that…
-
Heating profiles
Please add a function for multiple profiles for heating schedules based on 1 week of heating schedules being different to another week of heating schedules based on work patterns etc . I know there is the geo fencing function but that relies on people having that opinion turned on. In my experience younger members of the…
-
Heating in summer
hi do you turn off heating as the weather becomes warmer or as it’s set up just let it run and do its thing so if warm enough it stays off ?
-
Boiler burner coming on when Tado is off
Hi our gas usage has been incredibly high for a while now and been trying to get to the bottom of it. It feels like it is burning gas for way longer than it should. So I tested it with Tado when I turn off all the rooms and hot water. The boiler is still firing up and burner light is on. We have Tado wireless receiver…
-
Electric underfloor heating
When the thermostats were on sale in the summer I got another one with the intention of trying to replace the crappy thermostats that controls the electric underfloor heating in the bathroom. Forgot about it until I found it gathering dust in cupboard now. The previous owner installed this and we don’t have any technical…
-
Landlord control anonymous
Hi, I’ve had the Tado installed on basis that I can control remotely but my tenant (once found) can also control. Aim here is I can ultimately control and add/remove tenants to then manage accordingly. How ever I live next door and don’t want to share my contact details with tenant under fully managed or I’ll be opening…
-
Integrate wireless thermostat and smart radiator TRVs
My system includes one wireless thermostat in a family room, plus smart radiator TRVs in bedrooms, hallway, dining room and lounge. I’m trying to decide which room is best for the wireless thermostat and the TRVs. Should the wireless thermostat be in the warmest room without a TRV, in the coldest room without a TRV, or in…
-
Moved: Integrate wireless thermostat and smart radiator TRVs
This discussion has been moved.
-
Operating two boilers
Can I control two separate biolers in different properties with the same app?
-
Smart Thermostat not calling for heat
Hi, I have just installed two smart stats as an add on for a system installed last week. The original installation is all working and if one of the rad stats calls for heat it fires up the boiler but the two new ones don’t?…… Am I missing something or is there another reason?……🤷🏻♂️😉🌻
-
Tado support not responding
The support@tado.zendesk.com email has always been very responsive but I have sent two emails recently without a response. Has the support email address changed?
-
Tado Smart AC Control Constantly connecting and disconnecting from WiFi.
Hi, I have a Tado Smart AC Control that shows E04 on the display. It is constantly connecting to my WiFi network for 0s, and disconnecting, only to reconnect again and repeat the process. This is ridiculous behaviour. The reason it can't connect to the Tado servers, and why it's showing E04 is because there is no internet…
-
Setup help / programmer question
Hello All, Appreciate anyone's help in advance, and if anything below I have done wrong or need to do more. I have the v3 wired starter kit + 1 more wired thermostat. I have replaced 2 x Danfoss4000 thermostats (one updtairs bedroom and doenstairs hallway) with the tado wired ones. Was just COM TO COM AND NO TO NO. There…
-
[Feedback Request] Improvements to the Smart Schedule
Hi all, In the next weeks, we will start working on improvements to the Smart Schedule. We have some improvements in mind but we would be interested to get additional feedback from the community. Related topics:
-
Battery Replacement Period
I have a total of 8 tado radiator valves, all of which have the recommended Panasonic eneloop batteries fitted. The radiator valve fitted in the bathroom requires battery replacement every few weeks, whereas all of the others go for months on end before needing replacements. I have used different pairs of batteries, so…
-
Asking Siri to control heating
Is this possible and by what phrases as I’m trying “Siri turn hall on to 20° for one hour” ? Thanks
-
Toshiba/ others Pure addition in V3+
Many AC's have nowadays this PURE functionally which uses plasma to burn small particles in the air. Would it be possible to enable this funtion in TADO V3+. It's very irritating since I cannot use this at all. If I enable it in my remote then every time I swicth any setting s from TADO this PURE function gets off. I know…
-
Temperature limits
Is it possible to set upper and lower limits on making temperature changes away from programmed schedule? So if it’s set to 21c, you can set -/+2 limit so a person can only change the TRV manually to 19 or 23c.
-
Add current Boiler Flow rate to graphs if using Digital Link
As Tado˚ knows the flow rate temperature of boiler at any given time, can this information be added to the graphs, as you hold your finger on the graph, see example below This would help us to determine if we can adjust the MAX Flow rate to be more efficient or if the Flow Rate is not high enough and the boiler is…
-
Radiator thermostat showing offline randomly
One of my smart thermostats goes offline and then reconnects some time later. Would adding a wireless thermostat help with the stability of the connection?
-
Application
Hello, yesterday I bought the Tado system, connected it, installed the applications, everything worked today, I can't access the applications, when logging in it shows an error, please help, thank you Error - email.not.unique Go There already is a home with contact email address mtvarenna@gmail.com arunki A Us ma Sorry,…
-
My newly installed system dropped off last week, and I can’t get the Bridge to reconnect.
I set it all up last Tuesday and everything worked immediately. The internet connection took a matter of seconds. Everything was fine for about 30 hours, then the Bridge connection was lost. Despite attempting everything that Tado suggest, nothing. I’ve even bought a TP-Link switch to realign with 10/100 Mbps. Their…
-
Heating permanently on
I've replaced a Drayton RTC thermostat with with a wired tado, this connected to. Baxi combi boiler. I set the boiler heating to constant as per instructions but now the heating is permanently on, the tado app/thermostat is not controlling heating i've attached a photos of the old thermostat wiring and how I've wired the…
-
Additional Wireless Thermostats
I have three wireless sensors, and three radiator thermostats. Currently, each of the main rooms is my house has one of each (I.e. one sensor and one thermostat). When my house gets cold, I’d like to be able to increase the temperature in all rooms simultaneously and centrally, without needing to go into each room. Is it…
-
Return to previous state at end of Manual Control session
If a Manual session is set and everything was set to off previously then at the end of the Manual session then it should all switch back to being off rather than switching to Smart Schedule. This currently seems like a major oversight and is misleading to users as it does not do as people would expect it to work. If the…
-
Hot Water
Can the hot water be turned off without affecting the central heating. I can only think of changing the schedule