-
Always show temperature on Tado ac
Have an option to set Tado ac to always show the current room temperature on display.
-
intelligent program depending on the outside temperature for AC and boiler with termistat
hi, I don't understand why it's not implemented. A intelligent program would be based on the outside temperature to determine whether the air conditioning or heating intelligent program should be activated. For example if outside temperature >= 25, activate the intelligent air conditioner program, if temperature below 18…
-
Merged: Weekly motions
This discussion has been merged.
-
Connessione da rete mobile 4G/5G
Ciao, chiedo se sia possibile poter modificare il firmware/software del Tado in modo da farlo funzionare anche da rete mobile, visto che funziona solo da rete Wi-Fi.
-
Quality issues
The display on my Smart Thermostat has failed after only 3 years. As its out of warranty Tado won't replace it. Having to replace one of the main components of the system every 3 years will make the system very expensive. Extremely disappointed by the Customer Service received from Tado and the quality of their hardware,…
-
External thermometer for tado.
Do taxi make an external thermometer that links in wth the tado app? If they do, I can't find one. It would be very useful if I could remotely monitor the outside temperature as well as the inside temp.
-
Moved: [Feature Request] Informeer gebruikers bij ontkoppelen bridge over risico verliezen abonneme…
This discussion has been moved.
-
Radio signal information
Show information about signal strength between each component and the bridge, so as to have an idea of where to put the bridge to improve the connection with the other components.
-
1hr boost
It would be very helpful to be able to set a timer for boosting a heating zone. Some time I would like to have the heating on either upstairs or downstairs outside the scheduled times. More often than not I set it manually but I always forget to turn it off. Since I have underfloor heating the temperature raises very…
-
Improved status and viewing
I know Tado can look at the background information on which device called for heat. Is there a way that a general log can be created and viewed in the Tado app. So if one room calls from heat and it's shown on a log, if another room detects window open, it still reports on the same log in a time order. Same goes for any…
-
More detailed information I graph 📊
Hi. I wish I could get valve opening in %, in the graph, the 3 heating symbols is not very useful I think. I can see the actual valve opening in % under the care menu, but I can only see it live and not historical data. It will be great if the graph could show opening % :-)
-
Create groups and group schedules
Hi. Previous house had a Hive thermostat and one of the great things was to be able to set a vacation period. You would set an away time and date and temperature and a return time and date. For example you might set all devices to 14C for the week you are away and it returns them to the programmed schedule at the time/date…
-
Spareparts for Tado Smart Radiator Thermostat
Tado Smart Radiator Thermostat is delivered together with a set of plastic adapters to fit different Radiator valves. I use the Danfoss RAVL adapter. This adapter has now been broken 3 times. Tado do not sell the adapters seperately, and they can not tell me where to buy them, So I have now had to buy 3 set Smart Radiator…
-
Meter readings
Around 18 months ago we had our electricity meter changed to a smart meter. The TADO problems that followed were : 1, it wasn’t possible to enter the meter readings for the new meter so I had to calculate how many kWh we had used that day and add it to the original meter reading. 2. This manipulation worked well until the…
-
Un termostato utilizzabile sia come riscaldamento che come raffrescamento, come accensione per PDC
Buongiorno, sarebbe utile realizzare un termostato che permetta la gestione sia del riscaldamento che del raffrescamento. Sempre con contatti puliti COM e NO. In modo che, in base alla stagione lui permetta di avere range temperatura da 5 a 25 per riscaldamento e da 16 a 30 per raffrescamento. Sarebbe utile semplicemente…
-
Radiator Fans
Hi Could you look at the possibility of add on-product such as a radiator fan kit... fans that clip under the radiator, controlled by the Tado valve, so when valve turns on, the fans help circulate the air around the radiator?... this would make a great add-on to Tado and help make it stand out from the other smart valve…
-
Fix bug where manual timer for heating changes does not work
Expected behaviour: GIVEN a room has a timer set for ‘Manual control on Tado device’ under settings/rooms and devices AND the room is currently running its standard schedule (ie there is not a manual adjustment currently running) WHEN the user makes a manual adjustment to the temperature for that room THEN the manual…
-
New Product - Tado Hot Water Cylinder Thermostat or Sensor needed
Tado already make a good range of Thermostats and Sensors to control the hot water flow to domestic radiators. However, in (the fair few) countries that rightly or wrongly use a hot water cylinder to store pre-heated water for use with domestic taps, Tado has no product available to support this. This means there is a…
-
Software development roadmap
The "Suggestions, Ideas, and Improvements" forum has been here for years, brimming with diverse topics and innovative suggestions from our users. However, one question lingers: What if tado° rekindled its commitment to transparency by sharing at least a simple software development roadmap with users? A follow up to a post…
-
Tado away/home iOS shortcut action
Hello, Tado is somewhat compatible with HomeKit using sensors/thermostats individually, but this is not great to create automations. It would be very useful to have a Tado shortcut action we can use in our scripts to set the current mode to be away or home, so we could create automations based on that. This would be…
-
Tado app to set only the tempature.
Why not create an app where you can set only the tempature. It's not handy that every app user can make changes to all settings. We could defently use it. For oure building.
-
Always on display option
Hi just installed my wired v3+ very easy instal and instantly impressed. One suggestion would be to have the option to keep the temp display always on so you don't have to press everytime to view current temp.
-
Away notifications conditions
Hey Tado product owner, Each time I leave my house in spring and summer, I get a notification if I want to switch to away mode.. which is great at winter! But if all of my tado are anyway turned completely off, it’s just annoying and would cause me to turn off the notifications from the app. How about to recognise when all…
-
Reduce water hammer sound by slowly closing the radiator valve
Sometimes Tado closes the radiator valves very quickly, which makes a loud bang due to water hammer. This can be bad for the equipment and it scares my kids. If the radiator valve would be closed more slowly, this would significantly reduce the amount of sound produced.
-
Smart AC Control 10° setting
Supporting frost protection in the Smart AC Control commands
-
New Device - Tado Immersion Hot Water Heating Controller
Many homes having a hot water storage cylinder would also have the hot water heated by an element in the cylinder either as standard or as a backup option to the gas heating system. I wanted to raise this subject here to help gauge if there is actually an interest within the community of Tado users? Do you have a hot water…
-
Smart boiler pressure gauge
Please create a smart boiler pressure gauge so that we can view boiler water pressure in the Tado app. I would like to get a notification from the Tado app if water pressure drops too low. Many thanks for your consideration.
-
Heating
Todo app is telling me I’m useing more than I am
-
Google Home Integration for On/Off Hot Water
I have a fairly old boiler with no digital temp control. Tado supports simply turning the hot water on or off. Google Home shows a entry for the hot water but does not allow me to change its state. Tado support told me: "You have the Hot Water tile enabled in your tado° app. However it is a relay ON/OFF control and you can…
-
Make On/Off Controls Available on Home Screen
It would be more convenient if each tile included a basic on/off control to save you having to go into a new screen first. You already display a 'power' icon in the top right of each tile - see attach - make this live so that clicking it actually works. See Tapo smart device app for example where this is already supported