-
Please vote: Meer bridges en zones in dezelfde app. / More bridges and zones in the same app.
Op het forum heb ik vaker gezien dat Tado in grotere gebouwen zoals onze pastorie met parochiezalen en dagkapel, niet toekomt met één bridge. De oudste verzoeken daaromtrent in het forum zijn al van een paar jaar geleden. Ook kan in de app maar één bridge worden aangesloten en kan je bovendien maar één gebouw invoeren. De…
-
Minimise Boiler Running
I have smart radiator valves in every room. However I have found that individual rooms heat and cool at different rates, which can lead to the boiler running more often. Eg. Room A cools and demands heating but Room B isn’t yet cool enough to demand but is cooling down. Room A warms up and cuts off and the a short time…
-
When using Turn off all rooms, add ability to resume schedule at selected time and date
I like the turn off all rooms option for when I go away but I would like the ability to be able to resume schedule at a certain time and date so I can set it for when I know I'm returning.
-
Add modes / scenarios
Add the option to create modes/scenarios and tie custom schedules to them. Some examples - work from home - Child week - Party As it is today there is a constant change of the schedules when I for example decide to work from home instead of the office or when it’s my week with my daughter.
-
Help!
I’ve installed this Tado and extension kit for a customer. I cannot fathom out how it controls a hot water valve. There’s no instructions and I’ve had to download all sorts on my phone to even get the instructions. I’m really not happy with the customer service, it’s impossible to talk to anyone or get any information. I…
-
types of user, limits to app, maximum temperatures - increased efficiency and security
Hi, I have had a Tado system for years and would like to suggest the following app and thermostat features: 1) User levels in the app Guest / User - geofencing only Child - As guest + can use the app to manually adjust permitted thermostats within limits. Member - As guest & child + can adjust schedules for permitted…
-
Getting most out of your heating system. New Tado device.
Getting most out of your heating system. New Tado device. I was inspired to write this article after reading “Add max. valve opening on thermostats!!” by cjp https://community.tado.com/en-gb/discussion/14775/add-max-valve-opening-on-thermostats I have been working on these issues for hours and days. Optimizing my heating…
-
Traploze aanvoertemperatuur
Momenteel wordt de aanvoertemperatuur aangestuurd in stappen van hele graden Celsius, kleinere stappen of traploos zou pendelgedrag behoorlijk kunnen verminderen.
-
Custom Smart Schedule
Hi , I often need additional options depending our home situation. Most of the time I need also a schedule Home but upstairs OFF or Home but upstairs normal schedule. When kids are home sick or we plan to use more the upstairs during the weekend
-
Please set more home control
Hi everyone, i think it s must to have a multiple home control from the app tado, i have many tado devices but when i found out it was impossible it has been one of the worst nightmare. How is that possible. I think it s obvious to let people control another house, as example, the holiday house in the mountains… i hope it…
-
Multi home support
Still waiting after all these years
-
Indicate which device is the measuring device for a group.
When looking at devices in a group (room) could you highlight the one that is the measuring device (master), as distinct from the others (slaves)? This is under Settings > Rooms & Devices and/or place the measuring device at the top of the list.
-
Improve feedback in app when geo fencing stops working
Yesterday when I got back home from work the temperature in our house was very low. I checked the Tado app and it showed that Tado was working in 'away' mode for the full day while my wife, that has Tado on her phone, was home all day. Last week everything was still working fine so I checked the Tado app on her phone. When…
-
Integrate with smart meter
Stop wasting my time with app notifications to key my meter reading to get smart eq working
-
Integrate Enerqy IQ with smart meters
This interface is technically possible - as an example the free Loop app already connects to smart meter data and manages it well..... https://loop.homes/
-
Temporary manual override for childlock on TRV
I would love to have the ability to configure an override code to allow adjusting the temperature on my child locked Smart Radiator Thermostat without using the app. The override code should be first configured via the app and could consist of for example three numbers indicating how many clicks the TRV needs to be turned…
-
Draadloze Temperatuursensor ook met deel graden laten werken
Ik vind het storend dat als ik in de app mijn max temperatuur op 20,5 graad zet, de draadloze temperatuursensor toch de kamer laat verwarmen naar 21 graden. Met de radiator knoppen gaat dit wel goed. Zelfs met tiende graden instelbaar. Waarom neemt de draadloze temperatuursensor dan niet de ingestelde temperatuur in tiende…
-
Oventrop 1011450 - Bulk Purchase
I am sure you are aware that the above elbow adapter is proving a success for the few using them. How about you arranging a bulk purchase from the German Firm in order that we may buy from you? For anyone who has not read the thread on this, the above link for Amazon shows the adapter which turns an upright tado TRV into…
-
Show amount of hot water available
Not sure if this is possible, but with all the tech these days, why can’t the app show you how much hot water you have available and therefore you know if you need to heat it up before you actually run out. Based on your usage it could even suggest and automate schedule. Seems quite simple!
-
All rooms temporal scheduling
Sometimes you need to set a schedule for all the rooms just for a while, or just for one day because it is a holiday and everyone is in the house, and the reset it with the touch of a button to keep the regular schedule. I think having a button to set a temporal schedule for all the rooms would be useful, instead of…
-
improve Care&Protect by reading bus-codes (OT)
care & protect is currently not reading out bus codes which display the error codes on my heater/boiler (Nefit Proline HRC24 - OpenTherm). In my recent case this led to low system pressure which I was not aware of and could damage the heater. luckily I found out quite early. Despite the heating request to the heater, the…
-
Interazione pompa calore irragiamento
Per la gestione tramite Tado degli split pompa di calore, sarebbe molto interessante un interfaccia con un sensore di irraggiamento, da installare, in modo da fare funzionare gli stessi solo quando il fotovoltaico produce una quantità decisa dall' utente. Potrebbe anche andare bene una lettura della produzione di energia…
-
Économie Energie
Bonjour, Il serait intéressant voir nécessaire de pouvoir éteindre les leds du switch internet comme sur la plupart des box et autre objet connecté
-
Multi home
Bought Tado for my Airbnb, love it - bought a 2nd system for my home only to discover no multi home function. Have since read on this forum, and other places, it’s not available so had to return. C’mon Tado… you are not listening to your customers… it’s a pretty basic - and fundamental - requirement!
-
Multi-Home Tado
Would be so great to have multi home support in the app. Such a pain having to log in and out all the time. If this is complex - and I realise that not everyone needs it - how about releasing "copies" of the App so we can download 2 or 3 of them and have them logged in individually. This may apply well to everyone. I want…
-
Make app developers to have multi homes into one account
Many Smart home Apps have multi home capabilities, for example my Kwikset App or My Tapo App allow me to control smart door locks or cameras in two different homes. Hence, this is not rocket science is an easy fix for the Tado App. So I hope is done soon
-
More than one tado
I have a holiday home where I have installed tado and I am very pleased with the system. The remote control by phone is excellent. I would like to install tado at my main house but I can’t because you can only have one application on a phone. I think it would be great to be able to have more than one application on a…
-
Allow naming of smart radiator thermostat
It would be really good if I could assign names to all of my smart thermostats. It would make it so much easier to identify which one needs its batteries changed.
-
Simple UI improvements
Great system, nice app. Here are my suggestions on how you could improve the user interface (UI) in the mobile app for better usability and utility. In order of impact to the experience: Show humidity readings for each room on the Home view tiles - this would give more utility than the current solution - having to tap down…
-
Adjust humidity readings (Humidity offset)
Graag een optie om een offset mee te geven aan de luchtvochtigheid. Zelfde optie zoals bij de temperatuur