-
Usage original airco remote
first of all, my Tado Smart Ac V3 works well with my Daikin air conditioning. Unfortunately I miss 1 function, this is that if someone uses the original remote of the air conditioning, you will not see this in the Tado app, so if someone turns on the air conditioning with the original remote, the app will remain off, so it…
-
Uitschakelen verwarming
Tijdens de zomerperiode hebben wij de gewoonte om Tado uit te schakelen zodat alle temperaturen op “vorstbeveiliging” ingesteld worden. Ook dit jaar werd het Tado-systeem uitgeschakeld. Bijgevolg wordt de app ook niet meer geopend om op te volgen of alles nog wel naar behoren functioneert. Nu merkte ik gisteren per toeval…
-
Tado Outdoor Weather Station
Develop an outdoor weather station that would be a similar design to indoor Tados. The product would track temperature, pressure, humidity etc. Could be a stand alone product for people that don't have Tado or a crucial part of the Tado eco-system for those that do. Failing that, partner with a leading weather station…
-
show battery charge level as a percentage
Please show the battery charge level as a percentage or even better show a graph of the battery charge level over time; this will provide much better info on anticipating when batteries need to be changed.
-
Kühlfunktion für Wärmepumpe
Als Kunde möchte ich Kühlfunktion meiner Wärmepumpe mit einem tado Thermostat nutzen können
-
Toevoegen van GJoule
Voor stad- en blokverwarming krijg je alleen heet water geleverd in Joules, ik gebruik nu maar m3 maar dit geeft geen goede inzichten en zal ook jullie informatie beïnvloeden. Werkt verder prima😀
-
iPhone widget interface
The widget has a large temperature gauge however the off, heat and cool part is small and requires very careful movement to select the one you’re after. Increase the size of this as the user experience isn’t great or easy.
-
Airco fan speed control with Google Assistant
It appears that setting fan speeds (low, medium, high, auto) for our Tado controlled airco devices with Google Assistant is currently not supported. We can set the temperature, and set cooling or heating with Google Assistant, but not the fan speed. Fan speed is always set to “medium” if you turn the Airco on with Google…
-
Support for Viessmann PlusBus
Since 2020 the Viessmann Vitodens 2xx and 3xx range of gas boilers do not support KM-Bus or OpenTherm any longer. Viessmann decided to "upgrade" the interface on this boilers to PlusBus. This is an in-house developed protocol which they claim is an evolution from KM-Bus. However there is zero information to be found online…
-
Wireless Temperature Sensor upgrade
When I first saw the Wireless Temperature Sensor, I thought, brilliant. I love tado products and that will be a great addition to my setup. I started reading, and to my surprise (semi considering the product name), I got to know that it is "only" a temperature sensor. I think there is a massive missed opportunity here from…
-
Option turn off LED
an option for the led display to be turned off, perhaps only when actually used, for example. The display lights up a dark bedroom and can be disturbing.
-
Future energy tariffs
Please add support for adding future energy tariffs for Energy IQ .Currently one can only select dates until today. While my supplier sends me tariffs in advance, which I ikely forget adding later.
-
Integrate with smartthings
we need an official integration. Why would i not want to control some of the best smart elements of my house with my heating??? Makes no sense there is no official integration
-
coloured tado units
I'm refurbing the house and the Tado in the kitchen is going to look really out of place with its white colour scheme strapped to an anthracite radiator.
-
Room types in Tado app
On the tado website, it suggests different temperature and humidity tolerances for rooms (bedrooms, living rooms, kitchens, bathrooms for example) Setting the room type in the app would allow different tolerances for air comfort
-
Balance AC geen melding laten geven als de Airco uit staat
Ik zou graag een nieuwe functie voorstellen. We hebben destijds gekozen voor de slimme airco bediening omdat deze beschikt over een functie die de airco in Eco stand zet als alle huisgenoten van huis zijn. Hoewel dit geen gratis optie is (beetje jammer, iets met marketing denk ik), hebben wij wel de optie aan gezet om…
-
remove unneeded App icons
I don't use all functions in the app: how can I remove an Icon from the screen? If this is not possible: please add it you your list of ideas / suggestions. cheers StefanF
-
Child Lock to shut screen off
My little one likes spinning the TRV through cot railings, want to be able to child Lock and shut led display off
-
Use Smart AC Controller as Wireless Temperature sensor
If people have a Smart AC Controller it would be good if it could be used like Wireless Temperature sensor with Smart Radiator Valves. That's could be easily done through Internet Bridge, they are in the same network. In addition if AC can't heat but there is a Smart Radiator Valve in that room, Smart AC Controller could…
-
Auto heat/cool boost
Thermostat automatically lowers or raises temperature if temperature hasn't reached set temperature. I.e if the AC is set at 22°c and the room temperature hasn't dropped to that temperature the thermostat will tell the AC to cool to chill lower than what's been set untill it gets to 22°c. Therefore making the condenser…
-
Access to bad connection data and signal strength
To help with placing the internet bridge, It would be helpful if there was an easy way to see when devices (eg radiator thermostats, wireless boiler controller etc) have disconnected from the internet. A list of the times they disconnected/reconnected or even just a total count of the times this happened. Currently to see…
-
App improvements please!
1) It would be really good if we could see the average house temperature across all smart radiator valves in the wireless temp sensor and then have the option to boost ALL to a set temperature and not just 25c. 2) Being able to manage the boost funtion better (e.g. boost lounge & office together for a set time), so maybe…
-
Range improvement and live signal strength for connection status
Please support the addition of a second Bridge to a single account - this would solve the annoying range issues with valves cutting in and out of reception. Equally the information to indicate signal strength for devices would help bridge position.
-
Interior air quality data
The interior air quality data is debatable as there is no physical sensor, and it is even more misleading with open window detection disabled. I suggest that this feature be redesigned/revised. Tado° External sensor(s) Average ppb 113
-
"summer mode" to keep radiator valves open during summer
The problem is: If I connect all the smart radiator thermostats to my zone controller and I don't want to heat any room (because it is summer now) this results in all the radiators being 'closed' (or 'blocked'). This makes the total central heating system volume smaller (since the radiators are essentially cut off from the…
-
Limit boiler output
As someone who has a Tado extension kit, wired into my boiler using Opentherm for modulating control, I'd love to have the option to limit the maximum output that tado can call for. Perhaps even on a room by room basis. The default is that tado will call for maximum output if the temperature of a room is quite cold.…
-
Créer un vrai thermostat
Bonjour, mon idée est assez simple, se servir du boîtier tado, qui prend la température, comme un thermostat, au lieu de laisser le climatiseur surfonctionner systématiquement.
-
Simple, automated monthly export
Hi I know there are various requests around data export, but could you not provide a simple option that enables a monthly export of the data? this is easy to add, could be fully automated and the data file sent to the account holder by email or via a more secure link where it can be downloaded for say 7 days. Tado is a…
-
Save(Export) and Load(Import) room settings
Hi. I really like the Tado system, but would it be possible that you can add a Save/load feature for the room settings. It would be great to be able to save a "winter" configuration, which has different timings and settings compared with a "autumn" set... for example, in autumn we would like to have 3 radiators turning…
-
Push hors domicile
Il est en général inutile de vouloir activé le mode "hors domicile" quand le chauffage est mis sur "hors gel"