-
EnergyIQ to include Hot Water usage as well
It would be great to see Hot Water usage along the heating in EnergyIQ. Thanks
-
Show current temperature on TRVs
Would it be possible to have an option to show the current temperature on the TRV? I have the child lock enabled on all my thermostats and when you spin the wheel it flashes the programmed temperature. It would be nice if there was a way to nudge the dial and display the current temperature without having to open the app…
-
Show hardware version in the app
Simple suggestion, display the hardware version in the app along with the rest of the device settings. It might save a lot of support queries looking for this information!
-
Better control of away mode
Hi! I'm using my AC as a heat source for my summer home and away mode is very important for me. "Away mode" is not just "over the day", "while at work" in this situation but the major mode of operation. The problem I have is that you can't create time slots in away mode, so the AC have to stay on and cost money more then…
-
Change room colour in app when heating
Can the app be changed to highlight those rooms that are heating
-
Customers' data and statistic processing, storing, keeping and access
Dear tado° (community) I have a feedback-concern regarding privacy in your service. Recently I had a case with a malfunctioning (I believe so) thermostat head device. While the discussion is still going in that thread, I have another concern: during our conversation the support engineer mentioned: > The last time your…
-
Make Auto-Assist and Energy-IQ tiles active upon subscription activation in the Tado app
Hello, I activated my annual Auto Assist subscription yesterday, but the Active-Assist and Energy-IQ tabs remained the same (advertising the service). I had to contact support about this, just to be told that it is expected behaviour, and that data will get populated after a month. While that makes sense, it also makes for…
-
Smart home automation
Is there a way to set trigger for when humidity is at the set level to send notification via Alexa or Google or any third party integration? Ideal would be to look at the humidity inside and compare to weather forecast humidity level and if outside is lower than inside send notification to Smart home devices or phone to…
-
Boiler cool down period
Hi, There is a huge need for boiler cool down period. Similar to what Honeywell do, so it doesn't fire up every few minutes again as heat being called for each instance but waits 15-20 minutes in between finishing boiler work and starting new heating cycle. Maybe this is already happening not sure but I have feeling that…
-
Users with different roles
When looking at the user configuration it would be good to see that not all users have full control over the whole system. I am thinking about (for example) 2 roles: An Administrator role and a user role. Obviously, the Administrator can do everything. The user role can be connected to specific rooms and control that room.…
-
Hot Water control in Apple Home
Please enable a Hot Water control in Apple Home.
-
Real window sensors from tado
We would like a real window / door sensor for the "window open function". The current detection of the open windows via the thermostats works so far quite well. However, we have discovered some problems. 1. In some rooms the detection of an open window does not work or does it too late (e.g. bathroom, room with balcony or…
-
Homekit + manual installation for iOS devices
Besides the homekit integration flow also allow iOS users to set up a device using the Android flow. in order to prevent issues like described by jamieb https://community.tado.com/en-gb/discussion/1270/smart-ac-control-v3-without-homekit
-
Usage original airco remote
first of all, my Tado Smart Ac V3 works well with my Daikin air conditioning. Unfortunately I miss 1 function, this is that if someone uses the original remote of the air conditioning, you will not see this in the Tado app, so if someone turns on the air conditioning with the original remote, the app will remain off, so it…
-
Uitschakelen verwarming
Tijdens de zomerperiode hebben wij de gewoonte om Tado uit te schakelen zodat alle temperaturen op “vorstbeveiliging” ingesteld worden. Ook dit jaar werd het Tado-systeem uitgeschakeld. Bijgevolg wordt de app ook niet meer geopend om op te volgen of alles nog wel naar behoren functioneert. Nu merkte ik gisteren per toeval…
-
Tado Outdoor Weather Station
Develop an outdoor weather station that would be a similar design to indoor Tados. The product would track temperature, pressure, humidity etc. Could be a stand alone product for people that don't have Tado or a crucial part of the Tado eco-system for those that do. Failing that, partner with a leading weather station…
-
show battery charge level as a percentage
Please show the battery charge level as a percentage or even better show a graph of the battery charge level over time; this will provide much better info on anticipating when batteries need to be changed.
-
Kühlfunktion für Wärmepumpe
Als Kunde möchte ich Kühlfunktion meiner Wärmepumpe mit einem tado Thermostat nutzen können
-
Toevoegen van GJoule
Voor stad- en blokverwarming krijg je alleen heet water geleverd in Joules, ik gebruik nu maar m3 maar dit geeft geen goede inzichten en zal ook jullie informatie beïnvloeden. Werkt verder prima😀
-
iPhone widget interface
The widget has a large temperature gauge however the off, heat and cool part is small and requires very careful movement to select the one you’re after. Increase the size of this as the user experience isn’t great or easy.
-
Airco fan speed control with Google Assistant
It appears that setting fan speeds (low, medium, high, auto) for our Tado controlled airco devices with Google Assistant is currently not supported. We can set the temperature, and set cooling or heating with Google Assistant, but not the fan speed. Fan speed is always set to “medium” if you turn the Airco on with Google…
-
Support for Viessmann PlusBus
Since 2020 the Viessmann Vitodens 2xx and 3xx range of gas boilers do not support KM-Bus or OpenTherm any longer. Viessmann decided to "upgrade" the interface on this boilers to PlusBus. This is an in-house developed protocol which they claim is an evolution from KM-Bus. However there is zero information to be found online…
-
Wireless Temperature Sensor upgrade
When I first saw the Wireless Temperature Sensor, I thought, brilliant. I love tado products and that will be a great addition to my setup. I started reading, and to my surprise (semi considering the product name), I got to know that it is "only" a temperature sensor. I think there is a massive missed opportunity here from…
-
Option turn off LED
an option for the led display to be turned off, perhaps only when actually used, for example. The display lights up a dark bedroom and can be disturbing.
-
Future energy tariffs
Please add support for adding future energy tariffs for Energy IQ .Currently one can only select dates until today. While my supplier sends me tariffs in advance, which I ikely forget adding later.
-
Integrate with smartthings
we need an official integration. Why would i not want to control some of the best smart elements of my house with my heating??? Makes no sense there is no official integration
-
coloured tado units
I'm refurbing the house and the Tado in the kitchen is going to look really out of place with its white colour scheme strapped to an anthracite radiator.
-
Room types in Tado app
On the tado website, it suggests different temperature and humidity tolerances for rooms (bedrooms, living rooms, kitchens, bathrooms for example) Setting the room type in the app would allow different tolerances for air comfort
-
Balance AC geen melding laten geven als de Airco uit staat
Ik zou graag een nieuwe functie voorstellen. We hebben destijds gekozen voor de slimme airco bediening omdat deze beschikt over een functie die de airco in Eco stand zet als alle huisgenoten van huis zijn. Hoewel dit geen gratis optie is (beetje jammer, iets met marketing denk ik), hebben wij wel de optie aan gezet om…
-
remove unneeded App icons
I don't use all functions in the app: how can I remove an Icon from the screen? If this is not possible: please add it you your list of ideas / suggestions. cheers StefanF