-
Long-press app icon options
Could a “resume schedule” shortcut be added to the list of options when you long hold the tado app icon?
-
Away mode schedules for hot water
Away mode for hot water is simply on or off. Is it possible to have on or off or a schedule? As is case with heating, when I go away in winter months, I would want some heat in the water system as well as within the home to ensure against freezing pipes and condensation build up in rooms and mould.
-
Can we get smaller buttons?
I don't see the point in having to scroll down to see all the rooms, and then all the environmental buttons. It would be great if there could be an option to resize the buttons (e.g. specify how many in each column). Likewise, the quick buttons at the top require horizontal scrolling when again they would be in columns.
-
Tado...low heat,pump running for hours.
Hello! I have disconnected my tado V3+ cause to be honest i did not liked the way it worked,and to be more clear and on the matter of facts,i can tell you that after the instalation( bridge+ thermostat+ wireless receiver) and let the Tado to do his work i have discovered it is very annoying and frustrating to see the Tado…
-
Confirm boiler shutdown before closing last rad valve
Hi, If the Tado app made sure it turned the boiler off before it closed the last radiator valve then this would allow the whole heating system to have tado valves on each radiator. In our house we have a nursery radiator which comes on regularly through the day and night. Because some radiators don't have thermostats…
-
Temperature presets
When adjusting the temperature for a specific block i do need to edit all time/day blocks individual, which is cumbersome. An enhancement could be the ability to have a couple of preset temperatures which can be assigned to the time block. Like "high temp." "low temp." "night temp." And when i then change the preset all…
-
Return to previous state at end of Manual Control session
If a Manual session is set and everything was set to off previously then at the end of the Manual session then it should all switch back to being off rather than switching to Smart Schedule. This currently seems like a major oversight and is misleading to users as it does not do as people would expect it to work. If the…
-
App suggestion front page dashboard heating room
Can you show in the overview of the room with the small heating icon,which room is requesting heating? Right now I have to open each of them individually to see which one is triggering my kettle to run. Would be easier to see this in front screen
-
Humidity warning
Hello, I like Tado very much, but I have a new request. The new feature of the air humitity in the rooms is really nice. But what would be very nice is that we get a warning if the humidity in a certain room is too high and if we have to open the window. That would be great! Thanks in advance! Greets from Belgium, Manu
-
2 of 3 verschillende Slimme schema's
Is het een idee om meerdere slimme schema's te kunnen maken. Welke je kan selecteren. Bijvoorbeeld: Slim schema 1: Normale week Slim schema 2: Thuis werken Slim schema 3: Vakantie (dus later uit en in bed dan normaal)
-
Open Windows sensors
The open window detection feature doesn't work well for me. Are there any plans to add sensors to your system? Thank you.
-
Full Air-conditioning Control
I have a house in France that I rent out with 5 air Mitsubishi Conditioning units. These units are inverter units so can perform the following tasks: cool,heat,dehumidify, fan, the IR controllers interface looks to of been created by the same guy that invented scientific calculators. Great if you know what you are doing…
-
Priority order that rooms heat up in
I think it would be a good idea to be able to set a priority of what order the rooms in my house heat up in as this would help when heading home as I would like lounge etc heated up to temp first but not so fussed about bedrooms and bathrooms. This would help to save money as heating system could come on later
-
Apple Watch native app
With useful canned responses/quick links eg message “you seem to have left home.. [switch to Away] [dismiss] Single click. Very cool Or at a glance small tiles showing which rooms currently being heated
-
Wasting battery power
Why do the valves work totally independently of the main start and stop process? What I mean is, why when the pump is about to stop do the valves close? They then may need to reopen again when the pump starts. If the valve was left open it would be ready when the pump restarts. If that valve doesn't need to be open it can…
-
Extensie voor internet bridge
Gelieve een “access point” / “repeater” functie te bouwen van jullie bestaande internet bridge. Mijn woning heeft 2 volwaardige verdiepingen en het bereik van de huidige internet bridge is niet voldoende. Een bijkomende bridge (per verdieping) lijkt mij geen onmogelijke opdracht. Jullie hebben reeds de hardware. Zet daar…
-
Current Temperature Font
Hi, So even though my eye sight isn’t what it used to be, the font size for current temperature is tiny, it really does need to be made bigger and should be a pretty straightforward UI fix.
-
Additional physical sensors (presence, doors closed) for more targeted routines
Hi! It would be great to have couple of additional sensor types to allow more customised routines: - presence/motion sensor - door/window open sensor These sensors could be additional conditions to the routines, e.g.: - heat bathroom to 23 degrees only when the door is closed - heat Office to 21 degrees Monday-Friday 8-18…
-
App Tile Swipe functionality
I would like to suggest adding tile swipe functionality. This would be to enable a swipe to the next device/thermostat after selection from the main dashboard. The app currently requires you to exit and select to enter the settings for another device. Retaining current functionality whilst adding the swipe to the next…
-
Not a new idea. Just common sense
I join the clamour for the bridges to act as repeaters. I have a large 18th century house with a barn wing and two heating circuits from one, large boiler. It took me ages to get tech support to explain how to control which room linked to which heating circuit, but I did have to buy to starter packs - so I have two bridges…
-
Limit the amount of heat a room can request (three flames)
It would be awesome if we could limit the amount of heat a room can request. This could be based upon the three heating indicators already shown in the app. This way we could limit a room with in floor heating to only request low heated water since it does not make sense to run the system at 70 degrees because the intake…
-
Home page indication for rooms on altered schedule
I am new to this, and messing with the schedules to set it up comfortably. I've noticed when I make a manual change to a room schedule, and then return to the homepage, the room icons show the set temps, but the button at the top right says Resume Schedule All Rooms. What you can't tell is which room(s) are set outside the…
-
Show current humidity in the main app screen
It would save a lot of clicks if we could see the current humidity in the main screen, close to the current room temperature. There is a lot of free space for this in each room square.
-
remove the need for the Internet bridge or at least use the house wifi
I think it's unbelievable that devices have to use a bespoke wifi bridge and even limit the household to a single bridge. I have just installed the system into a Yorkshire farm house with thick stone walls. no way does the thermostat, CH controller and bridge connect. If the system used the house wifi (where I have a mesh…
-
Activity logs
Hi, Right now it's very difficult to know if Geofencing is working or not. It would be useful to have a log that remembers a few events like: switched to away mode, switched to home mode, temperature lowered in room x, etc. This way we would know if Geofencing works correctly... My app closes all the time and since there…
-
Polish menu
Hello, can you add Polish to the application, I would be very grateful and other Poles too
-
Monitoring of Connectivity
Useful if the app could monitor connectivity of the Tado Internet Bridge to both he internet and Tado Cloud and notify the user if there is an issue
-
Advance Programme Setting
Hi I have my heating system set up to come on at a specific time. Sometimes I get home early and want to turn the schedule on rather than wait for the schedule to kick in. At present if you boost the system ALL the radiators come on. Turning them on individually is a pain I have contacted Tado and there is no way around…
-
Suppress Open Window Notification if room already warm
I keep getting notifications of open windows asking if I want to turn the heating off in a room which is good. However I keep getting them while the temperature of the room is already above what I had set. This means that the heating in that should already be turned off. Would it make sense to not send the notification if…
-
sleep at night with windows open - skip frost protection
Here in the UK overnight temperatures are often 1-2 degrees C, and I like to sleep with the bedroom window open. I suspect this fools Tado into turning on the smart TRV controlled radiator directly under my bedroom window. I'd like the 5C Frost Protection to a user definable number on a per-room basis or per device basis,…